## Changes
- Adds the following high level access scopes, each with `read` and
`write` levels:
- `activitypub`
- `admin` (hidden if user is not a site admin)
- `misc`
- `notification`
- `organization`
- `package`
- `issue`
- `repository`
- `user`
- Adds new middleware function `tokenRequiresScopes()` in addition to
`reqToken()`
- `tokenRequiresScopes()` is used for each high-level api section
- _if_ a scoped token is present, checks that the required scope is
included based on the section and HTTP method
- `reqToken()` is used for individual routes
- checks that required authentication is present (but does not check
scope levels as this will already have been handled by
`tokenRequiresScopes()`
- Adds migration to convert old scoped access tokens to the new set of
scopes
- Updates the user interface for scope selection
### User interface example
<img width="903" alt="Screen Shot 2023-05-31 at 1 56 55 PM"
src="https://github.com/go-gitea/gitea/assets/23248839/654766ec-2143-4f59-9037-3b51600e32f3">
<img width="917" alt="Screen Shot 2023-05-31 at 1 56 43 PM"
src="https://github.com/go-gitea/gitea/assets/23248839/1ad64081-012c-4a73-b393-66b30352654c">
## tokenRequiresScopes Design Decision
- `tokenRequiresScopes()` was added to more reliably cover api routes.
For an incoming request, this function uses the given scope category
(say `AccessTokenScopeCategoryOrganization`) and the HTTP method (say
`DELETE`) and verifies that any scoped tokens in use include
`delete:organization`.
- `reqToken()` is used to enforce auth for individual routes that
require it. If a scoped token is not present for a request,
`tokenRequiresScopes()` will not return an error
## TODO
- [x] Alphabetize scope categories
- [x] Change 'public repos only' to a radio button (private vs public).
Also expand this to organizations
- [X] Disable token creation if no scopes selected. Alternatively, show
warning
- [x] `reqToken()` is missing from many `POST/DELETE` routes in the api.
`tokenRequiresScopes()` only checks that a given token has the correct
scope, `reqToken()` must be used to check that a token (or some other
auth) is present.
- _This should be addressed in this PR_
- [x] The migration should be reviewed very carefully in order to
minimize access changes to existing user tokens.
- _This should be addressed in this PR_
- [x] Link to api to swagger documentation, clarify what
read/write/delete levels correspond to
- [x] Review cases where more than one scope is needed as this directly
deviates from the api definition.
- _This should be addressed in this PR_
- For example:
```go
m.Group("/users/{username}/orgs", func() {
m.Get("", reqToken(), org.ListUserOrgs)
m.Get("/{org}/permissions", reqToken(), org.GetUserOrgsPermissions)
}, tokenRequiresScopes(auth_model.AccessTokenScopeCategoryUser,
auth_model.AccessTokenScopeCategoryOrganization),
context_service.UserAssignmentAPI())
```
## Future improvements
- [ ] Add required scopes to swagger documentation
- [ ] Redesign `reqToken()` to be opt-out rather than opt-in
- [ ] Subdivide scopes like `repository`
- [ ] Once a token is created, if it has no scopes, we should display
text instead of an empty bullet point
- [ ] If the 'public repos only' option is selected, should read
categories be selected by default
Closes #24501
Closes #24799
Co-authored-by: Jonathan Tran <jon@allspice.io>
Co-authored-by: Kyle D <kdumontnu@gmail.com>
Co-authored-by: silverwind <me@silverwind.io>
This PR creates an API endpoint for creating/updating/deleting multiple
files in one API call similar to the solution provided by
[GitLab](https://docs.gitlab.com/ee/api/commits.html#create-a-commit-with-multiple-files-and-actions).
To archive this, the CreateOrUpdateRepoFile and DeleteRepoFIle functions
in files service are unified into one function supporting multiple files
and actions.
Resolves #14619
This adds the ability to pin important Issues and Pull Requests. You can
also move pinned Issues around to change their Position. Resolves #2175.
## Screenshots
The Design was mostly copied from the Projects Board.
## Implementation
This uses a new `pin_order` Column in the `issue` table. If the value is
set to 0, the Issue is not pinned. If it's set to a bigger value, the
value is the Position. 1 means it's the first pinned Issue, 2 means it's
the second one etc. This is dived into Issues and Pull requests for each
Repo.
## TODO
- [x] You can currently pin as many Issues as you want. Maybe we should
add a Limit, which is configurable. GitHub uses 3, but I prefer 6, as
this is better for bigger Projects, but I'm open for suggestions.
- [x] Pin and Unpin events need to be added to the Issue history.
- [x] Tests
- [x] Migration
**The feature itself is currently fully working, so tester who may find
weird edge cases are very welcome!**
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
Replace #16455
Close #21803
Mixing different Gitea contexts together causes some problems:
1. Unable to respond proper content when error occurs, eg: Web should
respond HTML while API should respond JSON
2. Unclear dependency, eg: it's unclear when Context is used in
APIContext, which fields should be initialized, which methods are
necessary.
To make things clear, this PR introduces a Base context, it only
provides basic Req/Resp/Data features.
This PR mainly moves code. There are still many legacy problems and
TODOs in code, leave unrelated changes to future PRs.
1. Remove unused fields/methods in web context.
2. Make callers call target function directly instead of the light
wrapper like "IsUserRepoReaderSpecific"
3. The "issue template" code shouldn't be put in the "modules/context"
package, so move them to the service package.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
This adds a API for getting License templates. This tries to be as close
to the [GitHub
API](https://docs.github.com/en/rest/licenses?apiVersion=2022-11-28) as
possible, but Gitea does not support all features that GitHub has. I
think they should been added, but this out f the scope of this PR. You
should merge #23006 before this PR for security reasons.
The old code is unnecessarily complex, and has many misuses.
Old code "wraps" a lot, wrap wrap wrap, it's difficult to understand
which kind of handler is used.
The new code uses a general approach, we do not need to write all kinds
of handlers into the "wrapper", do not need to wrap them again and
again.
New code, there are only 2 concepts:
1. HandlerProvider: `func (h any) (handlerProvider func (next)
http.Handler)`, it can be used as middleware
2. Use HandlerProvider to get the final HandlerFunc, and use it for
`r.Get()`
And we can decouple the route package from context package (see the
TODO).
# FAQ
## Is `reflect` safe?
Yes, all handlers are checked during startup, see the `preCheckHandler`
comment. If any handler is wrong, developers could know it in the first
time.
## Does `reflect` affect performance?
No. https://github.com/go-gitea/gitea/pull/24080#discussion_r1164825901
1. This reflect code only runs for each web handler call, handler is far
more slower: 10ms-50ms
2. The reflect is pretty fast (comparing to other code): 0.000265ms
3. XORM has more reflect operations already
Closes #20955
This PR adds the possibility to disable blank Issues, when the Repo has
templates. This can be done by creating the file
`.gitea/issue_config.yaml` with the content `blank_issues_enabled` in
the Repo.
Adds API endpoints to manage issue/PR dependencies
* `GET /repos/{owner}/{repo}/issues/{index}/blocks` List issues that are
blocked by this issue
* `POST /repos/{owner}/{repo}/issues/{index}/blocks` Block the issue
given in the body by the issue in path
* `DELETE /repos/{owner}/{repo}/issues/{index}/blocks` Unblock the issue
given in the body by the issue in path
* `GET /repos/{owner}/{repo}/issues/{index}/dependencies` List an
issue's dependencies
* `POST /repos/{owner}/{repo}/issues/{index}/dependencies` Create a new
issue dependencies
* `DELETE /repos/{owner}/{repo}/issues/{index}/dependencies` Remove an
issue dependency
Closes https://github.com/go-gitea/gitea/issues/15393
Closes #22115
Co-authored-by: Andrew Thornton <art27@cantab.net>
Remove `[repository.editor] PREVIEWABLE_FILE_MODES` setting that seemed
like it was intended to support this but did not work. Instead, whenever
viewing a file shows a preview, also have a Preview tab in the file
editor.
Add new `/markup` web and API endpoints with `comment`, `gfm`,
`markdown` and new `file` mode that uses a file path to determine the
renderer.
Remove `/markdown` web endpoint but keep the API for backwards and
GitHub compatibility.
## ⚠️ BREAKING ⚠️
The `[repository.editor] PREVIEWABLE_FILE_MODES` setting was removed.
This setting served no practical purpose and was not working correctly.
Instead a preview tab is always shown in the file editor when supported.
---------
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
this is a simple endpoint that adds the ability to rename users to the
admin API.
Note: this is not in a mergeable state. It would be better if this was
handled by a PATCH/POST to the /api/v1/admin/users/{username} endpoint
and the username is modified.
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Fixes #19555
Test-Instructions:
https://github.com/go-gitea/gitea/pull/21441#issuecomment-1419438000
This PR implements the mapping of user groups provided by OIDC providers
to orgs teams in Gitea. The main part is a refactoring of the existing
LDAP code to make it usable from different providers.
Refactorings:
- Moved the router auth code from module to service because of import
cycles
- Changed some model methods to take a `Context` parameter
- Moved the mapping code from LDAP to a common location
I've tested it with Keycloak but other providers should work too. The
JSON mapping format is the same as for LDAP.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
This PR adds the support for scopes of access tokens, mimicking the
design of GitHub OAuth scopes.
The changes of the core logic are in `models/auth` that `AccessToken`
struct will have a `Scope` field. The normalized (no duplication of
scope), comma-separated scope string will be stored in `access_token`
table in the database.
In `services/auth`, the scope will be stored in context, which will be
used by `reqToken` middleware in API calls. Only OAuth2 tokens will have
granular token scopes, while others like BasicAuth will default to scope
`all`.
A large amount of work happens in `routers/api/v1/api.go` and the
corresponding `tests/integration` tests, that is adding necessary scopes
to each of the API calls as they fit.
- [x] Add `Scope` field to `AccessToken`
- [x] Add access control to all API endpoints
- [x] Update frontend & backend for when creating tokens
- [x] Add a database migration for `scope` column (enable 'all' access
to past tokens)
I'm aiming to complete it before Gitea 1.19 release.
Fixes #4300
The API endpoints for "git" can panic if they are called on an empty
repo. We can simply allow empty repos for these endpoints without worry
as they should just work.
Fix #22452
Signed-off-by: Andrew Thornton <art27@cantab.net>
Since we changed the /api/v1/ routes to disallow session authentication
we also removed their reliance on CSRF. However, we left the
ReverseProxy authentication here - but this means that POSTs to the API
are no longer protected by CSRF.
Now, ReverseProxy authentication is a kind of session authentication,
and is therefore inconsistent with the removal of session from the API.
This PR proposes that we simply remove the ReverseProxy authentication
from the API and therefore users of the API must explicitly use tokens
or basic authentication.
Replace #22077
Close #22221
Close #22077
Signed-off-by: Andrew Thornton <art27@cantab.net>
Close #14601
Fix #3690
Revive of #14601.
Updated to current code, cleanup and added more read/write checks.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Signed-off-by: Andre Bruch <ab@andrebruch.com>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Norwin <git@nroo.de>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Change all license headers to comply with REUSE specification.
Fix #16132
Co-authored-by: flynnnnnnnnnn <flynnnnnnnnnn@github>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
In #21637 it was mentioned that the purpose of the API routes for the
packages is unclear. This PR adds some documentation.
Fix #21637
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Fix #20921.
The `ctx.Repo.GitRepo` has been used in deleting issues when the issue
is a PR.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
This PR enhances the CORS middleware usage by allowing for the headers
to be configured in `app.ini`.
Fixes #21746
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
This adds an api endpoint `/files` to PRs that allows to get a list of changed files.
built upon #18228, reviews there are included
closes https://github.com/go-gitea/gitea/issues/654
Co-authored-by: Anton Bracke <anton@ju60.de>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
The recovery, API, Web and package frameworks all create their own HTML
Renderers. This increases the memory requirements of Gitea
unnecessarily with duplicate templates being kept in memory.
Further the reloading framework in dev mode for these involves locking
and recompiling all of the templates on each load. This will potentially
hide concurrency issues and it is inefficient.
This PR stores the templates renderer in the context and stores this
context in the NormalRoutes, it then creates a fsnotify.Watcher
framework to watch files.
The watching framework is then extended to the mailer templates which
were previously not being reloaded in dev.
Then the locales are simplified to a similar structure.
Fix #20210
Fix #20211
Fix #20217
Signed-off-by: Andrew Thornton <art27@cantab.net>
- Add a new push mirror to specific repository
- Sync now ( send all the changes to the configured push mirrors )
- Get list of all push mirrors of a repository
- Get a push mirror by ID
- Delete push mirror by ID
Signed-off-by: Mohamed Sekour <mohamed.sekour@exfo.com>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: zeripath <art27@cantab.net>
* go.mod: add go-fed/{httpsig,activity/pub,activity/streams} dependency
go get github.com/go-fed/activity/streams@master
go get github.com/go-fed/activity/pub@master
go get github.com/go-fed/httpsig@master
* activitypub: implement /api/v1/activitypub/user/{username} (#14186)
Return informations regarding a Person (as defined in ActivityStreams
https://www.w3.org/TR/activitystreams-vocabulary/#dfn-person).
Refs: https://github.com/go-gitea/gitea/issues/14186
Signed-off-by: Loïc Dachary <loic@dachary.org>
* activitypub: add the public key to Person (#14186)
Refs: https://github.com/go-gitea/gitea/issues/14186
Signed-off-by: Loïc Dachary <loic@dachary.org>
* activitypub: go-fed conformant Clock instance
Signed-off-by: Loïc Dachary <loic@dachary.org>
* activitypub: signing http client
Signed-off-by: Loïc Dachary <loic@dachary.org>
* activitypub: implement the ReqSignature middleware
Signed-off-by: Loïc Dachary <loic@dachary.org>
* activitypub: hack_16834
Signed-off-by: Loïc Dachary <loic@dachary.org>
* Fix CI checks-backend errors with go mod tidy
Signed-off-by: Anthony Wang <ta180m@pm.me>
* Change 2021 to 2022, properly format package imports
Signed-off-by: Anthony Wang <ta180m@pm.me>
* Run make fmt and make generate-swagger
Signed-off-by: Anthony Wang <ta180m@pm.me>
* Use Gitea JSON library, add assert for pkp
Signed-off-by: Anthony Wang <ta180m@pm.me>
* Run make fmt again, fix err var redeclaration
Signed-off-by: Anthony Wang <ta180m@pm.me>
* Remove LogSQL from ActivityPub person test
Signed-off-by: Anthony Wang <ta180m@pm.me>
* Assert if json.Unmarshal succeeds
Signed-off-by: Anthony Wang <ta180m@pm.me>
* Cleanup, handle invalid usernames for ActivityPub person GET request
Signed-off-by: Anthony Wang <ta180m@pm.me>
* Rename hack_16834 to user_settings
Signed-off-by: Anthony Wang <ta180m@pm.me>
* Use the httplib module instead of http for GET requests
* Clean up whitespace with make fmt
* Use time.RFC1123 and make the http.Client proxy-aware
* Check if digest algo is supported in setting module
* Clean up some variable declarations
* Remove unneeded copy
* Use system timezone instead of setting.DefaultUILocation
* Use named constant for httpsigExpirationTime
* Make pubKey IRI #main-key instead of /#main-key
* Move /#main-key to #main-key in tests
* Implemented Webfinger endpoint.
* Add visible check.
* Add user profile as alias.
* Add actor IRI and remote interaction URL to WebFinger response
* fmt
* Fix lint errors
* Use go-ap instead of go-fed
* Run go mod tidy to fix missing modules in go.mod and go.sum
* make fmt
* Convert remaining code to go-ap
* Clean up go.sum
* Fix JSON unmarshall error
* Fix CI errors by adding @context to Person() and making sure types match
* Correctly decode JSON in api_activitypub_person_test.go
* Force CI rerun
* Fix TestActivityPubPersonInbox segfault
* Fix lint error
* Use @mariusor's suggestions for idiomatic go-ap usage
* Correctly add inbox/outbox IRIs to person
* Code cleanup
* Remove another LogSQL from ActivityPub person test
* Move httpsig algos slice to an init() function
* Add actor IRI and remote interaction URL to WebFinger response
* Update TestWebFinger to check for ActivityPub IRI in aliases
* make fmt
* Force CI rerun
* WebFinger: Add CORS header and fix Href -> Template for remote interactions
The CORS header is needed due to https://datatracker.ietf.org/doc/html/rfc7033#section-5 and fixes some Peertube <-> Gitea federation issues
* make lint-backend
* Make sure Person endpoint has Content-Type application/activity+json and includes PreferredUsername, URL, and Icon
Setting the correct Content-Type is essential for federating with Mastodon
* Use UTC instead of GMT
* Rename pkey to pubKey
* Make sure HTTP request Date in GMT
* make fmt
* dont drop err
* Make sure API responses always refer to username in original case
Copied from what I wrote on #19133 discussion: Handling username case is a very tricky issue and I've already encountered a Mastodon <-> Gitea federation bug due to Gitea considering Ta180m and ta180m to be the same user while Mastodon thinks they are two different users. I think the best way forward is for Gitea to only use the original case version of the username for federation so other AP software don't get confused.
* Move httpsig algs constant slice to modules/setting/federation.go
* Add new federation settings to app.example.ini and config-cheat-sheet
* Return if marshalling error
* Make sure Person IRIs are generated correctly
This commit ensures that if the setting.AppURL is something like "http://127.0.0.1:42567" (like in the integration tests), a trailing slash will be added after that URL.
* If httpsig verification fails, fix Host header and try again
This fixes a very rare bug when Gitea and another AP server (confirmed to happen with Mastodon) are running on the same machine, Gitea fails to verify incoming HTTP signatures. This is because the other AP server creates the sig with the public Gitea domain as the Host. However, when Gitea receives the request, the Host header is instead localhost, so the signature verification fails. Manually changing the host header to the correct value and trying the veification again fixes the bug.
* Revert "If httpsig verification fails, fix Host header and try again"
This reverts commit f53e46c721.
The bug was actually caused by nginx messing up the Host header when reverse-proxying since I didn't have the line `proxy_set_header Host $host;` in my nginx config for Gitea.
* Go back to using ap.IRI to generate inbox and outbox IRIs
* use const for key values
* Update routers/web/webfinger.go
* Use ctx.JSON in Person response to make code cleaner
* Revert "Use ctx.JSON in Person response to make code cleaner"
This doesn't work because the ctx.JSON() function already sends the response out and it's too late to edit the headers.
This reverts commit 95aad98897.
* Use activitypub.ActivityStreamsContentType for Person response Content Type
* Limit maximum ActivityPub request and response sizes to a configurable setting
* Move setting key constants to models/user/setting_keys.go
* Fix failing ActivityPubPerson integration test by checking the correct field for username
* Add a warning about changing settings that can break federation
* Add better comments
* Don't multiply Federation.MaxSize by 1<<20 twice
* Add more better comments
* Fix failing ActivityPubMissingPerson test
We now use ctx.ContextUser so the message printed out when a user does not exist is slightly different
* make generate-swagger
For some reason I didn't realize that /templates/swagger/v1_json.tmpl was machine-generated by make generate-swagger... I've been editing it by hand for three months! 🤦
* Move getting the RFC 2616 time to a separate function
* More code cleanup
* Update go-ap to fix empty liked collection and removed unneeded HTTP headers
* go mod tidy
* Add ed25519 to httpsig algorithms
* Use go-ap/jsonld to add @context and marshal JSON
* Change Gitea user agent from the default to Gitea/Version
* Use ctx.ServerError and remove all remote interaction code from webfinger.go
Fixes #12338
This allows use to talk to the API with our ssh certificate (and/or ssh-agent) without needing to fetch an API key or tokens.
It will just automatically work when users have added their ssh principal in gitea.
This needs client code in tea
Update: also support normal pubkeys
ref: https://tools.ietf.org/html/draft-cavage-http-signatures
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add LFS API
* Update routers/api/v1/repo/file.go
Co-authored-by: Gusted <williamzijl7@hotmail.com>
* Apply suggestions
* Apply suggestions
* Update routers/api/v1/repo/file.go
Co-authored-by: Gusted <williamzijl7@hotmail.com>
* Report errors
* ADd test
* Use own repo for test
* Use different repo name
* Improve handling
* Slight restructures
1. Avoid reading the blob data multiple times
2. Ensure that caching is only checked when about to serve the blob/lfs
3. Avoid nesting by returning early
4. Make log message a bit more clear
5. Ensure that the dataRc is closed by defer when passed to ServeData
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Gusted <williamzijl7@hotmail.com>
Co-authored-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Fix indention
Signed-off-by: kolaente <k@knt.li>
* Add option to merge a pr right now without waiting for the checks to succeed
Signed-off-by: kolaente <k@knt.li>
* Fix lint
Signed-off-by: kolaente <k@knt.li>
* Add scheduled pr merge to tables used for testing
Signed-off-by: kolaente <k@knt.li>
* Add status param to make GetPullRequestByHeadBranch reusable
Signed-off-by: kolaente <k@knt.li>
* Move "Merge now" to a seperate button to make the ui clearer
Signed-off-by: kolaente <k@knt.li>
* Update models/scheduled_pull_request_merge.go
Co-authored-by: 赵智超 <1012112796@qq.com>
* Update web_src/js/index.js
Co-authored-by: 赵智超 <1012112796@qq.com>
* Update web_src/js/index.js
Co-authored-by: 赵智超 <1012112796@qq.com>
* Re-add migration after merge
* Fix frontend lint
* Fix version compare
* Add vendored dependencies
* Add basic tets
* Make sure the api route is capable of scheduling PRs for merging
* Fix comparing version
* make vendor
* adopt refactor
* apply suggestion: User -> Doer
* init var once
* Fix Test
* Update templates/repo/issue/view_content/comments.tmpl
* adopt
* nits
* next
* code format
* lint
* use same name schema; rm CreateUnScheduledPRToAutoMergeComment
* API: can not create schedule twice
* Add TestGetBranchNamesForSha
* nits
* new go routine for each pull to merge
* Update models/pull.go
Co-authored-by: a1012112796 <1012112796@qq.com>
* Update models/scheduled_pull_request_merge.go
Co-authored-by: a1012112796 <1012112796@qq.com>
* fix & add renaming sugestions
* Update services/automerge/pull_auto_merge.go
Co-authored-by: a1012112796 <1012112796@qq.com>
* fix conflict relicts
* apply latest refactors
* fix: migration after merge
* Update models/error.go
Co-authored-by: delvh <dev.lh@web.de>
* Update options/locale/locale_en-US.ini
Co-authored-by: delvh <dev.lh@web.de>
* Update options/locale/locale_en-US.ini
Co-authored-by: delvh <dev.lh@web.de>
* adapt latest refactors
* fix test
* use more context
* skip potential edgecases
* document func usage
* GetBranchNamesForSha() -> GetRefsBySha()
* start refactoring
* ajust to new changes
* nit
* docu nit
* the great check move
* move checks for branchprotection into own package
* resolve todo now ...
* move & rename
* unexport if posible
* fix
* check if merge is allowed before merge on scheduled pull
* debugg
* wording
* improve SetDefaults & nits
* NotAllowedToMerge -> DisallowedToMerge
* fix test
* merge files
* use package "errors"
* merge files
* add string names
* other implementation for gogit
* adapt refactor
* more context for models/pull.go
* GetUserRepoPermission use context
* more ctx
* use context for loading pull head/base-repo
* more ctx
* more ctx
* models.LoadIssueCtx()
* models.LoadIssueCtx()
* Handle pull_service.Merge in one DB transaction
* add TODOs
* next
* next
* next
* more ctx
* more ctx
* Start refactoring structure of old pull code ...
* move code into new packages
* shorter names ... and finish **restructure**
* Update models/branches.go
Co-authored-by: zeripath <art27@cantab.net>
* finish UpdateProtectBranch
* more and fix
* update datum
* template: use "svg" helper
* rename prQueue 2 prPatchCheckerQueue
* handle automerge in queue
* lock pull on git&db actions ...
* lock pull on git&db actions ...
* add TODO notes
* the regex
* transaction in tests
* GetRepositoryByIDCtx
* shorter table name and lint fix
* close transaction bevore notify
* Update models/pull.go
* next
* CheckPullMergable check all branch protections!
* Update routers/web/repo/pull.go
* CheckPullMergable check all branch protections!
* Revert "PullService lock via pullID (#19520)" (for now...)
This reverts commit 6cde7c9159a5ea75a10356feb7b8c7ad4c434a9a.
* Update services/pull/check.go
* Use for a repo action one database transaction
* Apply suggestions from code review
* Apply suggestions from code review
Co-authored-by: delvh <dev.lh@web.de>
* Update services/issue/status.go
Co-authored-by: delvh <dev.lh@web.de>
* Update services/issue/status.go
Co-authored-by: delvh <dev.lh@web.de>
* use db.WithTx()
* gofmt
* make pr.GetDefaultMergeMessage() context aware
* make MergePullRequestForm.SetDefaults context aware
* use db.WithTx()
* pull.SetMerged only with context
* fix deadlock in `test-sqlite\#TestAPIBranchProtection`
* dont forget templates
* db.WithTx allow to set the parentCtx
* handle db transaction in service packages but not router
* issue_service.ChangeStatus just had caused another deadlock :/
it has to do something with how notification package is handled
* if we merge a pull in one database transaktion, we get a lock, because merge infoce internal api that cant handle open db sessions to the same repo
* ajust to current master
* Apply suggestions from code review
Co-authored-by: delvh <dev.lh@web.de>
* dont open db transaction in router
* make generate-swagger
* one _success less
* wording nit
* rm
* adapt
* remove not needed test files
* rm less diff & use attr in JS
* ...
* Update services/repository/files/commit.go
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
* ajust db schema for PullAutoMerge
* skip broken pull refs
* more context in error messages
* remove webUI part for another pull
* remove more WebUI only parts
* API: add CancleAutoMergePR
* Apply suggestions from code review
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
* fix lint
* Apply suggestions from code review
* cancle -> cancel
Co-authored-by: delvh <dev.lh@web.de>
* change queue identifyer
* fix swagger
* prevent nil issue
* fix and dont drop error
* as per @zeripath
* Update integrations/git_test.go
Co-authored-by: delvh <dev.lh@web.de>
* Update integrations/git_test.go
Co-authored-by: delvh <dev.lh@web.de>
* more declarative integration tests (dedup code)
* use assert.False/True helper
Co-authored-by: 赵智超 <1012112796@qq.com>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Targeting #14936, #15332
Adds a collaborator permissions API endpoint according to GitHub API: https://docs.github.com/en/rest/collaborators/collaborators#get-repository-permissions-for-a-user to retrieve a collaborators permissions for a specific repository.
### Checks the repository permissions of a collaborator.
`GET` `/repos/{owner}/{repo}/collaborators/{collaborator}/permission`
Possible `permission` values are `admin`, `write`, `read`, `owner`, `none`.
```json
{
"permission": "admin",
"role_name": "admin",
"user": {}
}
```
Where `permission` and `role_name` hold the same `permission` value and `user` is filled with the user API object. Only admins are allowed to use this API endpoint.
Adds a feature [like GitHub has](https://docs.github.com/en/pull-requests/collaborating-with-pull-requests/proposing-changes-to-your-work-with-pull-requests/creating-a-pull-request-from-a-fork) (step 7).
If you create a new PR from a forked repo, you can select (and change later, but only if you are the PR creator/poster) the "Allow edits from maintainers" option.
Then users with write access to the base branch get more permissions on this branch:
* use the update pull request button
* push directly from the command line (`git push`)
* edit/delete/upload files via web UI
* use related API endpoints
You can't merge PRs to this branch with this enabled, you'll need "full" code write permissions.
This feature has a pretty big impact on the permission system. I might forgot changing some things or didn't find security vulnerabilities. In this case, please leave a review or comment on this PR.
Closes #17728
Co-authored-by: 6543 <6543@obermui.de>
