forgejo/docs/content/doc/features/authentication.en-us.md

date	title	slug	weight	toc	draft	menu
2016-12-01T16:00:00+02:00	Authentication	authentication	10	false	false	sidebar parent name weight identifier features Authentication 10 authentication

Authentication

{{< toc >}}

LDAP (Lightweight Directory Access Protocol)

Both the LDAP via BindDN and the simple auth LDAP share the following fields:

• Authorization Name (required)

  • A name to assign to the new method of authorization.

• Host (required)

  • The address where the LDAP server can be reached.
  • Example: mydomain.com

• Port (required)

  • The port to use when connecting to the server.
  • Example: 389 for LDAP or 636 for LDAP SSL

• Enable TLS Encryption (optional)

  • Whether to use TLS when connecting to the LDAP server.

• Admin Filter (optional)

  • An LDAP filter specifying if a user should be given administrator privileges. If a user account passes the filter, the user will be privileged as an administrator.
  • Example: (objectClass=adminAccount)
  • Example for Microsoft Active Directory (AD): (memberOf=CN=admin-group,OU=example,DC=example,DC=org)

• Username attribute (optional)

  • The attribute of the user's LDAP record containing the user name. Given attribute value will be used for new Gitea account user name after first successful sign-in. Leave empty to use login name given on sign-in form.
  • This is useful when supplied login name is matched against multiple attributes, but only single specific attribute should be used for Gitea account name, see "User Filter".
  • Example: uid
  • Example for Microsoft Active Directory (AD): sAMAccountName

• First name attribute (optional)

  • The attribute of the user's LDAP record containing the user's first name. This will be used to populate their account information.
  • Example: givenName

• Surname attribute (optional)

  • The attribute of the user's LDAP record containing the user's surname. This will be used to populate their account information.
  • Example: sn

• E-mail attribute (required)

  • The attribute of the user's LDAP record containing the user's email address. This will be used to populate their account information.
  • Example: mail

LDAP via BindDN

Adds the following fields:

• Bind DN (optional)

  • The DN to bind to the LDAP server with when searching for the user. This may be left blank to perform an anonymous search.
  • Example: cn=Search,dc=mydomain,dc=com

• Bind Password (optional)

  • The password for the Bind DN specified above, if any. Note: The password is stored encrypted with the SECRET_KEY on the server. It is still recommended to ensure that the Bind DN has as few privileges as possible.

• User Search Base (required)

  • The LDAP base at which user accounts will be searched for.
  • Example: ou=Users,dc=mydomain,dc=com

• User Filter (required)

  • An LDAP filter declaring how to find the user record that is attempting to authenticate. The %s matching parameter will be substituted with login name given on sign-in form.
  • Example: (&(objectClass=posixAccount)(uid=%s))
  • Example for Microsoft Active Directory (AD): (&(objectCategory=Person)(memberOf=CN=user-group,OU=example,DC=example,DC=org)(sAMAccountName=%s)(!(UserAccountControl:1.2.840.113556.1.4.803:=2)))
  • To substitute more than once, %[1]s should be used instead, e.g. when matching supplied login name against multiple attributes such as user identifier, email or even phone number.
  • Example: (&(objectClass=Person)(|(uid=%[1]s)(mail=%[1]s)(mobile=%[1]s)))

• Enable user synchronization

  • This option enables a periodic task that synchronizes the Gitea users with the LDAP server. The default period is every 24 hours but that can be changed in the app.ini file. See the cron.sync_external_users section in the sample app.ini for detailed comments about that section. The User Search Base and User Filter settings described above will limit which users can use Gitea and which users will be synchronized. When initially run the task will create all LDAP users that match the given settings so take care if working with large Enterprise LDAP directories.

LDAP using simple auth

Adds the following fields:

• User DN (required)

  • A template to use as the user's DN. The %s matching parameter will be substituted with login name given on sign-in form.
  • Example: cn=%s,ou=Users,dc=mydomain,dc=com
  • Example: uid=%s,ou=Users,dc=mydomain,dc=com

• User Search Base (optional)

  • The LDAP base at which user accounts will be searched for.
  • Example: ou=Users,dc=mydomain,dc=com

• User Filter (required)

  • An LDAP filter declaring when a user should be allowed to log in. The %s matching parameter will be substituted with login name given on sign-in form.
  • Example: (&(objectClass=posixAccount)(cn=%s))
  • Example: (&(objectClass=posixAccount)(uid=%s))

Verify group membership in LDAP

Uses the following fields:

• Group Search Base (optional)

  • The LDAP DN used for groups.
  • Example: ou=group,dc=mydomain,dc=com

• Group Name Filter (optional)

  • An LDAP filter declaring how to find valid groups in the above DN.
  • Example: (|(cn=gitea_users)(cn=admins))

• User Attribute in Group (optional)

  • Which user LDAP attribute is listed in the group.
  • Example: uid

• Group Attribute for User (optional)

  • Which group LDAP attribute contains an array above user attribute names.
  • Example: memberUid

PAM (Pluggable Authentication Module)

This procedure enables PAM authentication. Users may still be added to the system manually using the user administration. PAM provides a mechanism to automatically add users to the current database by testing them against PAM authentication. To work with normal Linux passwords, the user running Gitea must also have read access to /etc/shadow in order to check the validity of the account when logging in using a public key.

Note: If a user has added SSH public keys into Gitea, the use of these keys may bypass the login check system. Therefore, if you wish to disable a user who authenticates with PAM, you should also manually disable the account in Gitea using the built-in user manager.

1. Configure and prepare the installation.
   • It is recommended that you create an administrative user.
   • Deselecting automatic sign-up may also be desired.
2. Once the database has been initialized, log in as the newly created administrative user.
3. Navigate to the user setting (icon in top-right corner), and select Site Administration -> Authentication Sources, and select Add Authentication Source.
4. Fill out the field as follows:
   • Authentication Type : PAM
   • Name : Any value should be valid here, use "System Authentication" if you'd like.
   • PAM Service Name : Select the appropriate file listed under /etc/pam.d/ that performs the authentication desired.¹
   • PAM Email Domain : The e-mail suffix to append to user authentication. For example, if the login system expects a user called gituser, and this field is set to mail.com, then Gitea will expect the user email field for an authenticated GIT instance to be gituser@mail.com.²

Note: PAM support is added via build-time flags, and the official binaries provided do not have this enabled. PAM requires that the necessary libpam dynamic library be available and the necessary PAM development headers be accessible to the compiler.

SMTP (Simple Mail Transfer Protocol)

This option allows Gitea to log in to an SMTP host as a Gitea user. To configure this, set the fields below:

• Authentication Name (required)

  • A name to assign to the new method of authorization.

• SMTP Authentication Type (required)

  • Type of authentication to use to connect to SMTP host, PLAIN or LOGIN.

• Host (required)

  • The address where the SMTP host can be reached.
  • Example: smtp.mydomain.com

• Port (required)

  • The port to use when connecting to the server.
  • Example: 587

• Allowed Domains

  • Restrict what domains can log in if using a public SMTP host or SMTP host with multiple domains.
  • Example: gitea.io,mydomain.com,mydomain2.com

• Force SMTPS

  • SMTPS will be used by default for connections to port 465, if you wish to use SMTPS for other ports. Set this value.
  • Otherwise if the server provides the STARTTLS extension this will be used.

• Skip TLS Verify

  • Disable TLS verify on authentication.

• This Authentication Source is Activated

  • Enable or disable this authentication source.

FreeIPA

• In order to log in to Gitea using FreeIPA credentials, a bind account needs to be created for Gitea:

• On the FreeIPA server, create a gitea.ldif file, replacing dc=example,dc=com with your DN, and provide an appropriately secure password:

  dn: uid=gitea,cn=sysaccounts,cn=etc,dc=example,dc=com
  changetype: add
  objectclass: account
  objectclass: simplesecurityobject
  uid: gitea
  userPassword: secure password
  passwordExpirationTime: 20380119031407Z
  nsIdleTimeout: 0
  

• Import the LDIF (change localhost to an IPA server if needed). A prompt for Directory Manager password will be presented:

  ldapmodify -h localhost -p 389 -x -D \
  "cn=Directory Manager" -W -f gitea.ldif
  

• Add an IPA group for gitea_users :

  ipa group-add --desc="Gitea Users" gitea_users
  

• Note: For errors about IPA credentials, run kinit admin and provide the domain admin account password.

• Log in to Gitea as an Administrator and click on "Authentication" under Admin Panel. Then click Add New Source and fill in the details, changing all where appropriate.

SPNEGO with SSPI (Kerberos/NTLM, for Windows only)

Gitea supports SPNEGO single sign-on authentication (the scheme defined by RFC4559) for the web part of the server via the Security Support Provider Interface (SSPI) built in Windows. SSPI works only in Windows environments - when both the server and the clients are running Windows.

Before activating SSPI single sign-on authentication (SSO) you have to prepare your environment:

• Create a separate user account in active directory, under which the gitea.exe process will be running (eg. user under domain domain.local):

• Create a service principal name for the host where gitea.exe is running with class HTTP:

  • Start Command Prompt or PowerShell as a privileged domain user (eg. Domain Administrator)
  • Run the command below, replacing host.domain.local with the fully qualified domain name (FQDN) of the server where the web application will be running, and domain\user with the name of the account created in the previous step:

  setspn -A HTTP/host.domain.local domain\user
  

• Sign in (sign out if you were already signed in) with the user created

• Make sure that ROOT_URL in the [server] section of custom/conf/app.ini is the fully qualified domain name of the server where the web application will be running - the same you used when creating the service principal name (eg. host.domain.local)

• Start the web server (gitea.exe web)

• Enable SSPI authentication by adding an SPNEGO with SSPI authentication source in Site Administration -> Authentication Sources

• Sign in to a client computer in the same domain with any domain user (client computer, different from the server running gitea.exe)

• If you are using Chrome or Edge, add the URL of the web app to the Local intranet sites (Internet Options -> Security -> Local intranet -> Sites)

• Start Chrome or Edge and navigate to the FQDN URL of Gitea (eg. http://host.domain.local:3000)

• Click the Sign In button on the dashboard and choose SSPI to be automatically logged in with the same user that is currently logged on to the computer

• If it does not work, make sure that:

  • You are not running the web browser on the same server where Gitea is running. You should be running the web browser on a domain joined computer (client) that is different from the server. If both the client and server are running on the same computer NTLM will be preferred over Kerberos.
  • There is only one HTTP/... SPN for the host
  • The SPN contains only the hostname, without the port
  • You have added the URL of the web app to the Local intranet zone
  • The clocks of the server and client should not differ with more than 5 minutes (depends on group policy)
  • Integrated Windows Authentication should be enabled in Internet Explorer (under Advanced settings)

---

1. For example, using standard Linux log-in on Debian "Bullseye" use common-session-noninteractive - this value may be valid for other flavors of Debian including Ubuntu and Mint, consult your distribution's documentation. ↩︎

2. This is a required field for PAM. Be aware: In the above example, the user will log into the Gitea web interface as gituser and not gituser@mail.com ↩︎