This is the release commit being forwarded back to main for 1.44.1
Co-authored-by: devsnek <devsnek@users.noreply.github.com>
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
Factoring out `dlint` upgrade from
https://github.com/denoland/deno/pull/24034 as it
requires us to change the lint step on mac to use ARM runners.
---------
Co-authored-by: Luca Casonato <hello@lcas.dev>
Co-authored-by: David Sherret <dsherret@users.noreply.github.com>
This makes `DOMException`'s `stack` property behave the same as native
errors' – `stack` is now an own accessor property on every instance, and
the getter calls `Error.prepareStackTrace`.
Upgrades `deno_core` to 0.284.0.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This commits adds the ability to set a would-be exit code
for the Deno process without forcing an immediate exit,
through the new `Deno.exitCode` API.
- **Implements `Deno.exitCode` getter and setter**: Adds support for
setting
and retrieving a would-be exit code via `Deno.exitCode`.
This allows for asynchronous cleanup before process termination
without immediately exiting.
- **Ensures type safety**: The setter for `Deno.exitCode` validates that
the provided value is a number, throwing a TypeError if not, to ensure
that
only valid exit codes are set.
Closes to #23605
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This patch fixes stdin read hanging on user input when switching tty
mode on Windows
Fixes #21111
On Windows, when switching from line to raw mode:
- Cancel ongoing console read by writing a return keypress to its input
buffer. This blocks the main thread until any ongoing read has been
cancelled to prevent interference with the screen state.
- On the read thread, restore the cursor position to where it was before
writing the enter, undoing its effect on the screen state.
- Restart reading and notify the main thread.
This commit changes `gzip` compression in `Deno.serve` API to flush data
after each write. There's a slight performance regression, but provided
test shows a scenario that was not possible before.
---------
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
We didn't honour the `position` options of `fd.read` and `fd.write`
because we checked if the buffer is of type `Buffer` instead of just
`Uint8Array`. Node does the latter. In doing so I noticed that the file
handle id was written to a public property which it definitely shouldn't
be. This was probably a typo.
Fixes https://github.com/denoland/deno/issues/23707
We didn't support the `throwIfNoEntry` option for Node's `fs.lstatSync`
method. Note that the async variant doesn't have this option.
Fixes https://github.com/denoland/deno/issues/23996
The mixed `number | bigint` representation was useful optimization for
pointers. Now, pointers are represented as V8 externals. As part of the
FFI stabilization effort we want to make `bigint` the only
representation for `u64` and `i64`.
BigInt representation performance is almost on par with mixed
representation with the added benefit that its less confusing and users
don't need manual checks and conversions for doing operations on the
value.
```
cpu: AMD Ryzen 5 7530U with Radeon Graphics
runtime: deno 1.43.6+92a8d09 (x86_64-unknown-linux-gnu)
file:///home/divy/gh/ffi/main.ts
benchmark time (avg) iter/s (min … max) p75 p99 p995
-------------------------------------------------------------------------- -----------------------------
nop 4.01 ns/iter 249,533,690.5 (3.97 ns … 10.8 ns) 3.97 ns 4.36 ns 9.03 ns
ret bigint 7.74 ns/iter 129,127,186.8 (7.72 ns … 10.46 ns) 7.72 ns 8.11 ns 8.82 ns
ret i32 7.81 ns/iter 128,087,100.5 (7.77 ns … 12.72 ns) 7.78 ns 8.57 ns 9.75 ns
ret bigint (add op) 15.02 ns/iter 66,588,253.2 (14.64 ns … 24.99 ns) 14.76 ns 19.13 ns 19.44 ns
ret i32 (add op) 12.02 ns/iter 83,209,131.8 (11.95 ns … 18.18 ns) 11.98 ns 13.11 ns 14.5 ns
```
Closes #19697. This fixes a bug where the writeFile API can create
partially-overwritten files which may lead to invalid / corrupt files or
data leakage. It also aligns the behavior of writing a ReadableStream
and writing a Uint8Array to the disk.
`createAsyncFromSyncIterator(x)` which is used in
`ReadableStream.from()` expects `x` as `Iterable` but, previous
implements specify `Iterator` or `IterableIterator`. If it was
`IterableIterator`, it would work, but if it was `Iterator`, an
exception will occur.
Tests have been merged into WPT.
https://github.com/web-platform-tests/wpt/pull/46365
---------
Co-authored-by: Asher Gomez <ashersaupingomez@gmail.com>
Node sets the default HTTP response status code to 200 on the
`ServerResponse`. We initialised it as `undefined` before which caused a
problem with 11ty's dev server.
Thanks to @vrugtehagel for reporting this issue and finding the correct
fix as well 🎉
Fixes https://github.com/denoland/deno/issues/23970
The flag lets us exit from read loop without throwing an error when
the stream is cancelled.
This fixes gRPC cancellation example.
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This PR removes the use of the custom `utc_now` function in favor of the
`chrono` implementation. It resolves #22864.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
If `@@asyncIterator` is `null` or `undefined`, it should ignores and
fallback to `@@iterator`.
Tests have been merged into WPT.
https://github.com/web-platform-tests/wpt/pull/46374
The proposal of `ReadableStream.from` uses TC39 [GetIterator][] and
[GetMethod][] within it.
GetMethod treats null as undefined.
So if `@@asyncIterator` is `null` it should be ignored and fallback to
`@@iterator`.
[GetIterator]: https://tc39.es/ecma262/#sec-getiterator
[GetMethod]: https://tc39.es/ecma262/#sec-getmethod
```bash
> deno eval "ReadableStream.from({ [Symbol.asyncIterator]: null, [Symbol.iterator]: () => ({ next: () => ({ done: true }) }) }).pipeTo(new WritableStream())"
error: Uncaught (in promise) TypeError: obj[SymbolAsyncIterator] is not a function
ReadableStream.from({ [Symbol.asyncIterator]: null, [Symbol.iterator]: () => ({ next: () => ({ done: true }) }) }).pipeTo(new WritableStream())
^
at getIterator (ext:deno_web/06_streams.js:5105:38)
at Function.from (ext:deno_web/06_streams.js:5207:22)
at file:///D:/work/js/deno/tests/wpt/suite/$deno$eval:1:16
```
---------
Co-authored-by: Asher Gomez <ashersaupingomez@gmail.com>
This is a primordialization effort to improve resistance against users
tampering with the global `Object` prototype.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Because the buffers are `MaybeUninit<V8Slice<u8>`, and the owner of the
`BoundedBufferChannel` is not obligated to read each and every bit of
data, we may find that some buffers were not automatically dropped if
unread by the time the `BoundedBufferChannelInner` is dropped.
Possible repro:
```
Deno.serve(() => new Response(new ReadableStream({ start(controller) { controller.enqueue(new Uint8Array(100_000_000)) } })));
```
```bash
while true; do curl localhost:8000 | dd count=1; done
```
This stubs `findSourceMap` in `node:module` by always returning
`undefined` as if it never found a source map. This unblocks the `ava`
test runner.
Fixes https://github.com/denoland/deno/issues/18666
Some npm libraries like `signal-exit` rely on the length of the listener
array returned by `process.listeners("SIGNT")` to be correct to
function. We weren't tracking `SIG*` events there, which broke those npm
libraries.
Fixes https://github.com/denoland/deno/issues/22892
the last commit had a regression, where it removed this branch, I
haven't tested the code but I think it should work
---------
Signed-off-by: Bedis Nbiba <bedisnbiba@gmail.com>
Popular test runners like Jest instantiate a new `Process` object
themselves and expect the class constructor to be callable without the
`new` keyword. This PR refactors our `Process` class implementation from
a proper ES2015 class to an ES5-style class which can be invoked both
with and without the `new` keyword like in Node.
Fixes https://github.com/denoland/deno/issues/23863
gRPC depends only on the END_STREAM flag to emit "trailers" event which
is responsible to propagate the errors correctly. This patch uses
Body::is_end_stream() to determine if a stream will end and set the
END_STREAM flag.
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
<!--
Before submitting a PR, please read
https://docs.deno.com/runtime/manual/references/contributing
1. Give the PR a descriptive title.
Examples of good title:
- fix(std/http): Fix race condition in server
- docs(console): Update docstrings
- feat(doc): Handle nested reexports
Examples of bad title:
- fix #7123
- update docs
- fix bugs
2. Ensure there is a related issue and it is referenced in the PR text.
3. Ensure there are tests that cover the changes.
4. Ensure `cargo test` passes.
5. Ensure `./tools/format.js` passes without changing files.
6. Ensure `./tools/lint.js` passes.
7. Open as a draft PR if your work is still in progress. The CI won't
run
all steps, but you can add '[ci]' to a commit message to force it to.
8. If you would like to run the benchmarks on the CI, add the 'ci-bench'
label.
-->
Fixes https://github.com/denoland/deno/issues/23801
---------
Signed-off-by: Marvin Hagemeister <marvinhagemeister50@gmail.com>
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
<!--
Before submitting a PR, please read
https://docs.deno.com/runtime/manual/references/contributing
1. Give the PR a descriptive title.
Examples of good title:
- fix(std/http): Fix race condition in server
- docs(console): Update docstrings
- feat(doc): Handle nested reexports
Examples of bad title:
- fix #7123
- update docs
- fix bugs
2. Ensure there is a related issue and it is referenced in the PR text.
3. Ensure there are tests that cover the changes.
4. Ensure `cargo test` passes.
5. Ensure `./tools/format.js` passes without changing files.
6. Ensure `./tools/lint.js` passes.
7. Open as a draft PR if your work is still in progress. The CI won't
run
all steps, but you can add '[ci]' to a commit message to force it to.
8. If you would like to run the benchmarks on the CI, add the 'ci-bench'
label.
-->
Fixes https://github.com/denoland/deno/issues/23397
Precursor to #23236
This implements the SNI features, but uses private symbols to avoid
exposing the functionality at this time. Note that to properly test this
feature, we need to add a way for `connectTls` to specify a hostname.
This is something that should be pushed into that API at a later time as
well.
```ts
Deno.test(
{ permissions: { net: true, read: true } },
async function listenResolver() {
let sniRequests = [];
const listener = Deno.listenTls({
hostname: "localhost",
port: 0,
[resolverSymbol]: (sni: string) => {
sniRequests.push(sni);
return {
cert,
key,
};
},
});
{
const conn = await Deno.connectTls({
hostname: "localhost",
[serverNameSymbol]: "server-1",
port: listener.addr.port,
});
const [_handshake, serverConn] = await Promise.all([
conn.handshake(),
listener.accept(),
]);
conn.close();
serverConn.close();
}
{
const conn = await Deno.connectTls({
hostname: "localhost",
[serverNameSymbol]: "server-2",
port: listener.addr.port,
});
const [_handshake, serverConn] = await Promise.all([
conn.handshake(),
listener.accept(),
]);
conn.close();
serverConn.close();
}
assertEquals(sniRequests, ["server-1", "server-2"]);
listener.close();
},
);
```
---------
Signed-off-by: Matt Mastracci <matthew@mastracci.com>
1. Generally we should prefer to use the `log` crate.
2. I very often accidentally commit `eprintln`s.
When we should use `println` or `eprintln`, it's not too bad to be a bit
more verbose and ignore the lint rule.
**THIS PR HAS GIT CONFLICTS THAT MUST BE RESOLVED**
This is the release commit being forwarded back to main for 1.43.2
Please ensure:
- [x] Everything looks ok in the PR
- [x] The release has been published
To make edits to this PR:
```shell
git fetch upstream forward_v1.43.2 && git checkout -b forward_v1.43.2 upstream/forward_v1.43.2
```
Don't need this PR? Close it.
cc @nathanwhit
Co-authored-by: nathanwhit <nathanwhit@users.noreply.github.com>
Co-authored-by: Nathan Whitaker <nathan@deno.com>
Part of #22607 (probably closes it, but I haven't done thorough testing)
Makes it so that `require.resolve` with `paths` specified will fallback
to using the global cache when the paths can't be found when using a
global cache (not when using a node_modules folder)
This correctly creates the `AbortSignal` regardless of when we request
it. If the signal is requested after the request has completed, the
signal is created in the aborted state.
Using GC counts, we can see a reduction in object creation:
This PR: 440
deno 1.42.4: 1650
deno 1.43.0+b02ffec: 874
This PR adds private `[REF]()` and `[UNREF]()` methods to Stdin class,
and call them from Node.js polyfill layer (`TTY` class). This enables
`process.stdin.unref()` and `process.stdin.ref()` for the case when
stdin is terminal.
closes #21796
By default, `deno serve` will assign port 8000 (like `Deno.serve`).
Users may choose a different port using `--port`.
`deno serve /tmp/file.ts`
`server.ts`:
```ts
export default {
fetch(req) {
return new Response("hello world!\n");
},
};
```
When the response has been successfully send, we abort the
`Request.signal` property to indicate that all resources associated with
this transaction may be torn down.
Most common argument to `env` option for `worker_threads.Worker` will be
`process.env`.
In Deno `process.env` is a `Proxy` which can't be cloned using
structured clone algorithm.
So to be safe, I'm creating a copy of actual object before it's sent to
the worker thread.
Ref #23522
Landing part of https://github.com/denoland/deno/pull/21903
This will allow us to more easily refactor `serveHttp` to live on top of
`serve` by splitting the websocket code out. There's probably a lot more
we could do here but this helps.
Embedders may have special requirements around file opening, so we add a
new `check_open` permission check that is called as part of the file
open process.
Adds an `addr` field to `HttpServer` to simplify the pattern
`Deno.serve({ onListen({ port } => listenPort = port })`. This becomes:
`const server = Deno.serve({}); port = server.addr.port`.
Changes:
- Refactors `serve` overloads to split TLS out (in preparation for
landing a place for the TLS SNI information)
- Adds an `addr` field to `HttpServer` that matches the `addr` field of
the corresponding `Deno.Listener`s.
Landing work from #21903, plus fixing a node compat bug.
We were always sending the HTTP/2 ALPN on TLS connections which might
confuse upstream servers.
Changes:
- Configure HTTP/2 ALPN when making the TLS connection from the HTTP/2
code
- Read the `ALPNProtocols` property from the TLS connection options
rather than the deno `alpnProtocols` field
- Add tests
Prereq for landing Deno.serveHttp on Deno.serve: removing older HTTP
servers from the codebase.
Closes https://github.com/denoland/deno/issues/23362
Previously we were panicking if there was a pending read on a
port and `receiveMessageOnPort` was called. This is now fixed
by cancelling the pending read, trying to read a message and
resuming reading in a loop.
Due to a terminating NUL that was placed in a `r#` string, we were not
actually NUL-terminating pipe names on Windows. While this has no
security implications due to the random nature of the prefix, it would
occasionally cause random failures when the trailing garbage would make
the pipe name invalid.
…faces (#23296)"
This reverts commit e190acbfa8.
Reverting because it broke stable API type declarations. We will reland
it for v1.43 with updated interfaces
Removes the certificate options from all the interfaces and replaces
them with a new `TlsCertifiedKeyOptions`. This allows us to centralize
the documentation for TLS key management for both client and server, and
will allow us to add key object support in the future.
Also adds an option `keyFormat` field to the cert/key that must be
omitted or set to `pem`. This will allow us to load other format keys in
the future `der`, `pfx`, etc.
In a future PR, we will add a way to load a certified key object, and we
will add another option to `TlsCertifiedKeyOptions` like so:
```ts
export interface TlsCertifiedKeyOptions =
| TlsCertifiedKeyPem
| TlsCertifiedKeyFromFile
| TlsCertifiedKeyConnectTls
| { key: Deno.CertifiedKey }
```
Changes:
- Implements a TCP socket listener that will allow for round-robin
load-balancing in-process.
- Cleans up the raw networking code to make it easier to work with.
This PR follows this fix (https://github.com/nodejs/node/pull/52005) in
Node.js.
Stream's construct callback happens one tick earlier by this change, and
it prevents the reordering of the first few chunks in
`node:stream.Writable`
closes #20284
I'm unsure whether we're planning to make the `Deno.FsFile` constructor
illegal or remove `FsFile` from the `Deno.*` namspace in Deno 2. Either
way, this PR works towards the former. I'll create a superceding PR if
the latter is planned instead.
Towards #23089
This currently fails to type-check in deno, but we know that listener is
a `Listener<TcpConn>` here and we should be able to improve the typing:
```
let listener = Deno.listen({ port: 0 });
console.log(listener.addr.port);
->
error: TS2339 [ERROR]: Property 'port' does not exist on type 'Addr'.
Property 'port' does not exist on type 'UnixAddr'.
let listener = Deno.listen({ port: 0 }); console.log(listener.addr.port)
```
After:
```
Check file:///tmp/test.ts
```
MessagePort if directly assigned to workerData property instead of
embedding it in an object then it is not patched to a NodeMessagePort.
This commit fixes the bug.
Fixes #23179.
Fixes #22454.
Enables passing `{tokens: true}` to `parseArgs` and setting default
values for options.
With this PR, the observable framework works with deno out of the box
(no unstable flags needed).
The existing code was basically copied straight from node, so this PR
mostly just updates that (out of date) vendored code. Also fixes some
issues with error exports (before this PR, in certain error cases we
were attempting to construct error classes that weren't actually in
scope).
The last change (in the second commit) adds a small hack so that we
actually exercise the `test-parse-args.js` node_compat test, previously
it was reported as passing though it should have failed. That test now
passes.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
The `tools/node_compat/node` submodule has been moved to
`tests/node_compat/runner/suite` and the remaining files within
`tools/node_compat` to `tests/node_compat/runner`.
Most of the changes are of the header within `tests/node_compat/test`
files. The `setup` and `test` tasks within `tests/node_comapt` execute
successfully.
Towards #22525
CC @mmastrac
Was doing a bit of debugging on why some stuff is not working in a
personal project and ran a quick debug profile and saw it cloning the
pkg json a lot. We should put this in an Rc.
Slightly different approach to similar changes in #22386
Note that this doesn't use a warmup script -- we are actually just doing
more work at snapshot time.
This commit fixes passing `MessagePort` instances to
`WorkerOptions.workerData`.
Before they were not serialized and deserialized properly when spawning
a worker thread.
Closes https://github.com/denoland/deno/issues/22935
Fixes #22158.
Basically reimplements the whole `StringDecoder` with a much more direct
translation (read like one-to-one) of node's current logic. The old
implementation was closer to node's super old impl and it was too hard
to keep the code structure while matching the behavior of their new
logic.
This adds support for UTF-16LE, ascii, and latin1.
This also enables the node_compat test, which now passes without
modification.
Fixes https://github.com/denoland/deno/issues/18972
Support for web-push VAPID keys & jws signing
- Fixes EC keygen to return raw private key and uncompressed public key
point.
- Support for `EC PRIVATE KEY`
Stub implementation of getCipherInfo(). Good enough for most cases.
Note: We do not support all OpenSSL ciphers (likely never will)
Fixes https://github.com/denoland/deno/issues/21805
Issue https://github.com/denoland/deno/issues/22222
This PR moves `runtime/permissions` code to a upstream crate called
`deno_permissions`. The `deno_permissions::PermissionsContainer` is put
into the OpState and can be used instead of the current trait-based
permissions system.
For this PR, I've migrated `deno_fetch` to the new crate but kept the
rest of the trait-based system as a wrapper of `deno_permissions` crate.
Doing the migration all at once is error prone and hard to review.
Comparing incremental compile times for `ext/fetch` on Mac M1:
| profile | `cargo build --bin deno` | `cargo plonk build --bin deno` |
| --------- | ------------- | ------------------- |
| `debug` | 20 s | 0.8s |
| `release` | 4 mins 12 s | 1.4s |
Fixes #19214.
We were using the `idna` crate to implement our polyfill for
`punycode.toASCII` and `punycode.toUnicode`. The `idna` crate is
correct, and adheres to the IDNA2003/2008 spec, but it turns out
`node`'s implementations don't really follow any spec! Instead, node
splits the domain by `'.'` and punycode encodes/decodes each part. This
means that node's implementations will happily work on codepoints that
are disallowed by the IDNA specs, causing the error in #19214.
While fixing this, I went ahead and matched the node behavior on all of
the punycode functions and enabled node's punycode test in our
`node_compat` suite.
This commit fixes race condition in "node:worker_threads" module were
the first message did a setup of "threadId", "workerData" and
"environmentData".
Now this data is passed explicitly during workers creation and is set up
before any user code is executed.
Closes https://github.com/denoland/deno/issues/22783
Closes https://github.com/denoland/deno/issues/22672
---------
Co-authored-by: Satya Rohith <me@satyarohith.com>
Modify `_http_outgoing.ts` to support the extended signature of
`validateHeaderName()` used since node v19.5.0/v18.14.0 by adding the
`label` parameter. (see:
https://nodejs.org/api/http.html#httpvalidateheadernamename-label)
Making both validation functions accessible as public exports of
`node:http`
Fixes: #22614
Fixes #21660
Adds a basic `Immediate` class to mirror `NodeJS.Immediate`, and changes
`setImmediate` and `clearImmediate` to return and accept (respectively)
`Immediate` objects.
Note that for now {ref,unref,hasRef} are effectively stubs, as deno_core
doesn't really natively support immediates (they're currently modeled as
timers with delay of 0). Eventually we probably want to actually
implement these properly.
This commit changes how we figure out if we're running on main
thread in `node:worker_threads` module. Instead of relying on quirky
"magic variable" for a name to check if we're on main thread, we are
now explicitly passing this information during bootstrapping of the
runtime. As a side effect, `WorkerOptions.name` is more useful
and matches what Node.js does more closely (though not fully).
Towards https://github.com/denoland/deno/issues/22783
This is the release commit being forwarded back to main for 1.41.2
Signed-off-by: Divy Srivastava <dj.srivastava23@gmail.com>
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
1. Stops `deno publish` using some custom include/exclude behaviour from
other sub commands
2. Takes ancestor directories into account when resolving gitignore
3. Backards compatible change that adds ability to unexclude an exclude
by using a negated glob at a more specific level for all sub commands
(see https://github.com/denoland/deno_config/pull/44).
<!--
Before submitting a PR, please read
https://docs.deno.com/runtime/manual/references/contributing
1. Give the PR a descriptive title.
Examples of good title:
- fix(std/http): Fix race condition in server
- docs(console): Update docstrings
- feat(doc): Handle nested reexports
Examples of bad title:
- fix #7123
- update docs
- fix bugs
2. Ensure there is a related issue and it is referenced in the PR text.
3. Ensure there are tests that cover the changes.
4. Ensure `cargo test` passes.
5. Ensure `./tools/format.js` passes without changing files.
6. Ensure `./tools/lint.js` passes.
7. Open as a draft PR if your work is still in progress. The CI won't
run
all steps, but you can add '[ci]' to a commit message to force it to.
8. If you would like to run the benchmarks on the CI, add the 'ci-bench'
label.
-->
Fixes https://github.com/denoland/deno/issues/18127https://github.com/denoland/deno/issues/17248
SvelteKit works now!
```
$ deno run -A npm:create-svelte@latest my-app
create-svelte version 6.0.9
┌ Welcome to SvelteKit!
│
◇ Which Svelte app template?
│ SvelteKit demo app
│
◇ Add type checking with TypeScript?
│ Yes, using JavaScript with JSDoc comments
│
◇ Select additional options (use arrow keys/space bar)
│ none
│
└ Your project is ready!
✔ Type-checked JavaScript
https://www.typescriptlang.org/tsconfig#checkJs
Install community-maintained integrations:
https://github.com/svelte-add/svelte-add
Next steps:
1: cd my-app
2: npm install
3: git init && git add -A && git commit -m "Initial commit" (optional)
4: npm run dev -- --open
To close the dev server, hit Ctrl-C
Stuck? Visit us at https://svelte.dev/chat
$ cd my-app/
$ deno task dev
Task dev vite dev
VITE v5.1.4 ready in 1632 ms
➜ Local: http://localhost:5173/
➜ Network: use --host to expose
➜ press h + enter to show help
```
<!--
Before submitting a PR, please read
https://docs.deno.com/runtime/manual/references/contributing
1. Give the PR a descriptive title.
Examples of good title:
- fix(std/http): Fix race condition in server
- docs(console): Update docstrings
- feat(doc): Handle nested reexports
Examples of bad title:
- fix #7123
- update docs
- fix bugs
2. Ensure there is a related issue and it is referenced in the PR text.
3. Ensure there are tests that cover the changes.
4. Ensure `cargo test` passes.
5. Ensure `./tools/format.js` passes without changing files.
6. Ensure `./tools/lint.js` passes.
7. Open as a draft PR if your work is still in progress. The CI won't
run
all steps, but you can add '[ci]' to a commit message to force it to.
8. If you would like to run the benchmarks on the CI, add the 'ci-bench'
label.
-->
The issue seems to be already fixed since we upped to a newer 18.x
version string in [another
PR](https://github.com/denoland/deno/pull/20366). Updating to latest
node LTS version can't hurt though.
Fixes https://github.com/denoland/deno/issues/21515
Improves #19100
Fixes #20356
Replaces #20428
Changes made in deno_core to support this:
- [x] Errors must be handled in setTimeout callbacks
- [x] Microtask ordering is not-quite-right
- [x] Timer cancellation must be checked right before dispatch
- [x] Timer sanitizer
- [x] Move high-res timer to deno_core
- [x] Timers need opcall tracing
fixes #22627
This PR fixes a node compat issue that is preventing `serverless-http`
and `serverless-express` npm modules from working with Deno. These
modules are useful for running apps on AWS Lambda (and other serverless
infra).
---------
Signed-off-by: Igor Zinkovsky <igor@deno.com>
Investigating https://github.com/denoland/deno/issues/22574
Unable to reproduce with a unit test, but assuming that it's a name
collision or create pipe/open pipe race, and adding some additional
diagnostics.
Gets us closer to solving #20707.
Rewrites the `TestEventSender`:
- Allow for explicit creation of multiple streams. This will allow for
one-std{out,err}-per-worker
- All test events are received along with a worker ID, allowing for
eventual, proper parallel threading of test events.
In theory this should open up proper interleaving of test output,
however that is left for a future PR.
I had some plans for a better performing synchronization primitive, but
the inter-thread communication is tricky. This does, however, speed up
the processing of large numbers of tests 15-25% (possibly even more on
100,000+).
Before
```
ok | 1000 passed | 0 failed (32ms)
ok | 10000 passed | 0 failed (276ms)
```
After
```
ok | 1000 passed | 0 failed (25ms)
ok | 10000 passed | 0 failed (230ms)
```
When using a prefix or suffix containing an invalid filename character,
it's not entirely clear where the errors come from. We make these errors
more consistent across platforms.
In addition, all permission prompts for tempfile and tempdir were
printing the same API name.
We also take the opportunity to make the tempfile random space larger by
2x (using a base32-encoded u64 rather than a hex-encoded u32).
This change deprecates
`Deno.CreateHttpClientOptions.{certChain,privateKey}` in favour of
`Deno.CreateHttpClientOptions.{cert,key}`.
Closes #22278
Co-authored-by: Matt Mastracci <matthew@mastracci.com>
Splitting the sleep and interval ops allows us to detect an interval
timer. We also remove the use of the `op_async_void_deferred` call.
A future PR will be able to split the op sanitizer messages for timers
and intervals.
Based on #21074 and #20741 I was looking for further potential use cases
of `TransformStream` `cancel()` method, so here go `CompressionStream`
and `DecompressionStream`.
Fixes #14212
`certFile` was being passed to `op_tls_start()` when it's unused and
undocumented.
Signed-off-by: Asher Gomez <ashersaupingomez@gmail.com>
Co-authored-by: Matt Mastracci <matthew@mastracci.com>
Note: tests are not the only part of the codebase that uses `std`. Other
parts, like `tools/`, do too. So, it could be argued that this is a
little misleading. Either way, I'm doing this as discussed with
@mmastrac.
This PR separates integration tests from CLI tests into a new project
named `cli_tests`. This is a prerequisite for an integration test runner
that can work with either the CLI binary in the current project, or one
that is built ahead of time.
## Background
Rust does not have the concept of artifact dependencies yet
(https://github.com/rust-lang/cargo/issues/9096). Because of this, the
only way we can ensure a binary is built before running associated tests
is by hanging tests off the crate with the binary itself.
Unfortunately this means that to run those tests, you _must_ build the
binary and in the case of the deno executable that might be a 10 minute
wait in release mode.
## Implementation
To allow for tests to run with and without the requirement that the
binary is up-to-date, we split the integration tests into a project of
their own. As these tests would not require the binary to build itself
before being run as-is, we add a stub integration `[[test]]` target in
the `cli` project that invokes these tests using `cargo test`.
The stub test runner we add has `harness = false` so that we can get
access to a `main` function. This `main` function's sole job is to
`execvp` the command `cargo test -p deno_cli`, effectively "calling"
another cargo target.
This ensures that the deno executable is always correctly rebuilt before
running the stub test runner from `cli`, and gets us closer to be able
to run the entire integration test suite on arbitrary deno executables
(and therefore split the build into multiple phases).
The new `cli_tests` project lives within `cli` to avoid a large PR. In
later PRs, the test data will be split from the `cli` project. As there
are a few thousand files, it'll be better to do this as a completely
separate PR to avoid noise.
This moves the op sanitizer descriptions into Rust code and prepares for
eventual op import from `ext:core/ops`. We cannot import these ops from
`ext:core/ops` as the testing infrastructure ops are not always present.
Changes:
- Op descriptions live in `cli` code and are currently accessible via an
op for the older sanitizer code
- `phf` dep moved to workspace root so we can use it here
- `ops.op_XXX` changed to to `op_XXX` to prepare for op imports later
on.
Migrations:
- Error registration no longer required for Interrupted or BadResource
(these are core exception)
- `include_js_files!`/`ExtensionFileSource` changes
This commit adds `ppid` getter for `node:process` to improve Node
compatibility one step further.
There is one problem though, which is that `Deno.ppid`, which
`process.ppid` internally calls, is actually of type `bigint` although
it's supposed to be `number`. I filed an issue for this (#22166). For
the time being, explciit type conversion from `bigint` to `number` is
applied to match the Node.js behavior.
Fixes https://github.com/denoland/deno/issues/22180
Matches the Node.js implementation more closely. Removed types, they do
not help just make it harder to debug with stack traces.
Follow up to #22157.
This leaves us with 4 usages of `ensureFastOps()` in `deno` itself.
There's also about 150 usages of `Deno.core.ops.<op_name>` left as well.
