This commit adds "deno add" subcommand that has a basic support for
adding "jsr:" packages to "deno.json" file.
This currently doesn't support "npm:" specifiers and specifying version
constraints.
Some `deno_std` tests were failing to print output that was resolved
after the last test finished. In addition, output printed before tests
began would sometimes appear above the "running X tests ..." line, and
sometimes below it depending on timing.
We now guarantee that all output is flushed before and after tests run,
making the output consistent.
Pre-test and post-test output are captured in `------ pre-test output
------` and `------ post-test output ------` blocks to differentiate
them from the regular output blocks.
Here's an example of a test (that is much noisier than normal, but an
example of what the output will look like):
```
Check ./load_unload.ts
------- pre-test output -------
load
----- output end -----
running 1 test from ./load_unload.ts
test ...
------- output -------
test
----- output end -----
test ... ok ([WILDCARD])
------- post-test output -------
unload
----- output end -----
```
As we add tracing to more types of runtime activity, `--trace-ops` is
less useful of a name. `--trace-leaks` better reflects that this feature
traces both ops and timers, and will eventually trace resource opening
as well.
This keeps `--trace-ops` as an alias for `--trace-leaks`, but prints a
warning to the console suggesting migration to `--trace-leaks`.
One test continues to use `--trace-ops` to test the deprecation warning.
---------
Signed-off-by: Matt Mastracci <matthew@mastracci.com>
- Removes the origin call, since all origins are the same for an isolate
(ie: the main module)
- Collects the `TestDescription`s and sends them all at the same time
inside of an Arc, allowing us to (later on) re-use these instead of
cloning.
Needs a follow-up pass to remove all the cloning, but that's a thread
that is pretty long to pull
---------
Signed-off-by: Matt Mastracci <matthew@mastracci.com>
Gets us closer to solving #20707.
Rewrites the `TestEventSender`:
- Allow for explicit creation of multiple streams. This will allow for
one-std{out,err}-per-worker
- All test events are received along with a worker ID, allowing for
eventual, proper parallel threading of test events.
In theory this should open up proper interleaving of test output,
however that is left for a future PR.
I had some plans for a better performing synchronization primitive, but
the inter-thread communication is tricky. This does, however, speed up
the processing of large numbers of tests 15-25% (possibly even more on
100,000+).
Before
```
ok | 1000 passed | 0 failed (32ms)
ok | 10000 passed | 0 failed (276ms)
```
After
```
ok | 1000 passed | 0 failed (25ms)
ok | 10000 passed | 0 failed (230ms)
```
1. Renames zap/fast-check to instead be a `no-slow-types` lint rule.
1. This lint rule is automatically run when doing `deno lint` for
packages (deno.json files with a name, version, and exports field)
1. This lint rules still occurs on publish. It can be skipped by running
with `--no-slow-types`
This changes the lockfile to not store JSR specifiers in the "remote"
section. Instead a single JSR integrity is stored per package in the
lockfile, which is a hash of the version's `x.x.x_meta.json` file, which
contains hashes for every file in the package. The hashes in this file
are then compared against when loading.
Additionally, when using `{ "vendor": true }` in a deno.json, the files
can be modified without causing lockfile errors—the checksum is only
checked when copying into the vendor folder and not afterwards
(eventually we should add this behaviour for non-jsr specifiers as
well). As part of this change, the `vendor` folder creation is not
always automatic in the LSP and running an explicit cache command is
necessary. The code required to track checksums in the LSP would have
been too complex for this PR, so that all goes through deno_graph now.
The vendoring is still automatic when running from the CLI.
This implementation heavily depends on there being a lockfile, meaning
JSR specifiers will always diagnose as uncached unless it's there. In
practice this affects cases where a `deno.json` isn't being used. Our
NPM specifier support isn't subject to this.
The reason for this is that the version constraint solving code is
currently buried in `deno_graph` and not usable from the LSP, so the
only way to reuse that logic is the solved-version map in the lockfile's
`packages.specifiers`.
Step 1 of the Rustification of sanitizers, which unblocks the faster
timers.
This replaces the resource sanitizer with a Rust one, using the new APIs
in deno_core.
This commit removes conditional type-checking of unstable APIs.
Before this commit `deno check` (or any other type-checking command and
the LSP) would error out if there was an unstable API in the code, but not
`--unstable` flag provided.
This situation hinders DX and makes it harder to configure Deno. Failing
during runtime unless `--unstable` flag is provided is enough in this case.
Ensures the Deno process is brought down even when the runtime gets hung
up on something.
Marvin found that the lsp was running without a parent vscode around so
this is maybe/probably related.
We were calling `expand_glob` on our excludes, which is very expensive
and unnecessary because we can pattern match while traversing instead.
1. Doesn't expand "exclude" globs. Instead pattern matches while walking
the directory.
2. Splits up the "include" into base paths and applicable file patterns.
This causes less pattern matching to occur because we're only pattern
matching on patterns that might match and not ones in completely
unrelated directories.
This commit adds a way to connect to the TS compiler host that is run
as part of the "deno lsp" subcommand. This can be done by specifying
"DENO_LSP_INSPECTOR" variable.
---------
Co-authored-by: Nayeem Rahman <nayeemrmn99@gmail.com>
Adds performance measurements for all ops used by the LSP. Also changes
output of "Language server status" page to include more precise
information.
Current suspicion is that computing "script version" takes a long time
for some users.
Adds an `--unstable-sloppy-imports` flag which supports the
following for `file:` specifiers:
* Allows writing `./mod` in a specifier to do extension probing.
- ex. `import { Example } from "./example"` instead of `import { Example
} from "./example.ts"`
* Allows writing `./routes` to do directory extension probing for files
like `./routes/index.ts`
* Allows writing `./mod.js` for *mod.ts* files.
This functionality is **NOT RECOMMENDED** for general use with Deno:
1. It's not as optimal for perf:
https://marvinh.dev/blog/speeding-up-javascript-ecosystem-part-2/
1. It makes tooling in the ecosystem more complex in order to have to
understand this.
1. The "Deno way" is to be explicit about what you're doing. It's better
in the long run.
1. It doesn't work if published to the Deno registry because doing stuff
like extension probing with remote specifiers would be incredibly slow.
This is instead only recommended to help with migrating existing
projects to Deno. For example, it's very useful for getting CJS projects
written with import/export declaration working in Deno without modifying
module specifiers and for supporting TS ESM projects written with
`./mod.js` specifiers.
This feature will output warnings to guide the user towards correcting
their specifiers. Additionally, quick fixes are provided in the LSP to
update these specifiers:
This PR causes Deno to include more files in the graph based on how a
template literal looks that's provided to a dynamic import:
```ts
const file = await import(`./dir/${expr}`);
```
In this case, it will search the `dir` directory and descendant
directories for any .js/jsx/etc modules and include them in the graph.
To opt out of this behaviour, move the template literal to a separate
line:
```ts
const specifier = `./dir/${expr}`
const file = await import(specifier);
```
This commit changes LSP log names by prefixing them, we now have these
prefixes:
- `lsp.*` - requests coming from the client
- `tsc.request.*` - requests coming from clients that are routed to TSC
- `tsc.op.*` - ops called by the TS host
- `tsc.host.*` - requests that call JavaScript runtime that runs
TypeScript compiler host
Additionall `Performance::mark` was split into `Performance::mark` and
`Performance::mark_with_args` to reduce verbosity of code and logs.
When an old request is obsoleted while the user is typing, the client
will say so to the server and tower-lsp will drop the future associated
with that request.
This wires that up to the ts server by having any request's token be
cancelled when the surrounding state is dropped.
This PR adds a new unstable "bring your own node_modules" (BYONM)
functionality currently behind a `--unstable-byonm` flag (`"unstable":
["byonm"]` in a deno.json).
This enables users to run a separate install command (ex. `npm install`,
`pnpm install`) then run `deno run main.ts` and Deno will respect the
layout of the node_modules directory as setup by the separate install
command. It also works with npm/yarn/pnpm workspaces.
For this PR, the behaviour is opted into by specifying
`--unstable-byonm`/`"unstable": ["byonm"]`, but in the future we may
make this the default behaviour as outlined in
https://github.com/denoland/deno/issues/18967#issuecomment-1761248941
This is an extremely rough initial implementation. Errors are
terrible in this and the LSP requires frequent restarts. Improvements
will be done in follow up PRs.
This makes `CliNpmResolver` a trait. The terminology used is:
- **managed** - Deno manages the node_modules folder and does an
auto-install (ex. `ManagedCliNpmResolver`)
- **byonm** - "Bring your own node_modules" (ex. `ByonmCliNpmResolver`,
which is in this PR, but unimplemented at the moment)
Part of #18967
When sending configuration requests to the client, reads `javascript`
and `typescript` sections in addition to `deno`.
The LSP's initialization options now accepts `javascript` and
`typescript` namespaces.
Give auto-import completion entries a sort-text suffix depending on if
the specifier parses as a URL. This will favour relative and bare
(likely import-mapped) specifiers.
This commit changes ordering of quickfix actions, by sorting them in
following order:
- TSC fixes
- Deno fixes
- deno_lint fixes
Co-authored-by: Nayeem Rahman <nayeemrmn99@gmail.com>
Removes usage of `serde_json::Value` in several ops used in TSC, in
favor of using strongly typed structs. This will unblock more
changes in https://github.com/denoland/deno/pull/20462.
LSP testing APIs now obey the various file inclusion settings:
- Modules shown in the text explorer now respect the `exclude`,
`test.exclude` and `test.include` fields in `deno.json`, as well as
`deno.enablePaths` in VSCode settings.
- Modules with testing code lens now respect the `"exclude"`,
`test.exclude` and `test.include` fields in `deno.json`. Code lens
already respects `deno.enablePaths`.
Previously we pre-computed enabled paths into `Config::enabled_paths`,
and had to keep updating it. Now we determine enabled paths directly
from `Config::settings` on demand as a single source of truth.
Removes `Config::root_uri`. If `InitializeParams::rootUri` is given, and
it doesn't correspond to a folder in
`InitializeParams::workspaceFolders`, prepend it to
`Config::workspace_folders` as a mocked folder.
Includes groundwork for
https://github.com/denoland/vscode_deno/issues/908. In a minor version
cycle or two we can fix that in vscode_deno, and it won't break for Deno
versions post this patch due to the corrected deserialization logic for
`enablePaths`.
Fixes #19802.
Properly respect when clients do not have the `workspace/configuration`
capability, a.k.a. when an editor cannot provide scoped settings on
request from the LSP.
- Fix one spot where we weren't checking for the capability before
sending this request.
- For `enablePaths`, fall back to the settings passed in the
initialization options in more cases.
- Respect the `workspace/configuration` capability in the test harness
client.
See:
https://microsoft.github.io/language-server-protocol/specifications/lsp/3.17/specification/#workspace_configuration.
Previously:
```rust
pub struct TestDefinition {
pub id: String,
pub name: String,
pub range: SourceRange,
pub steps: Vec<TestDefinition>,
}
pub struct TestDefinitions {
pub discovered: Vec<TestDefinition>,
pub injected: Vec<lsp_custom::TestData>,
pub script_version: String,
}
```
Now:
```rust
pub struct TestDefinition {
pub id: String,
pub name: String,
pub range: Option<Range>,
pub is_dynamic: bool, // True for 'injected' module, not statically detected but added at runtime.
pub parent_id: Option<String>,
pub step_ids: HashSet<String>,
}
pub struct TestModule {
pub specifier: ModuleSpecifier,
pub script_version: String,
pub defs: HashMap<String, TestDefinition>,
}
```
Storing the test tree as a literal tree diminishes the value of IDs,
even though vscode stores them that way. This makes all data easily
accessible from `TestModule`. It unifies the interface between
'discovered' and 'injected' tests. This unblocks some enhancements wrt
syncing tests between the LSP and extension, such as this TODO:
61f08d5a71/client/src/testing.ts (L251-L259)
and https://github.com/denoland/vscode_deno/issues/900. We should also
get more flexibility overall.
`TestCollector` is cleaned up, now stores a `&mut TestModule` directly
and registers tests as it comes across them with
`TestModule::register()`. This method ensures sanity in the redundant
data from having both of `TestDefinition::{parent_id,step_ids}`.
All of the messy conversions between `TestDescription`,
`LspTestDescription`, `TestDefinition`, `TestData` and `TestIdentifier`
are cleaned up. They shouldn't have been using `impl From` and now the
full list of tests is available to their implementations.
<!--
Before submitting a PR, please read https://deno.com/manual/contributing
1. Give the PR a descriptive title.
Examples of good title:
- fix(std/http): Fix race condition in server
- docs(console): Update docstrings
- feat(doc): Handle nested reexports
Examples of bad title:
- fix #7123
- update docs
- fix bugs
2. Ensure there is a related issue and it is referenced in the PR text.
3. Ensure there are tests that cover the changes.
4. Ensure `cargo test` passes.
5. Ensure `./tools/format.js` passes without changing files.
6. Ensure `./tools/lint.js` passes.
7. Open as a draft PR if your work is still in progress. The CI won't
run
all steps, but you can add '[ci]' to a commit message to force it to.
8. If you would like to run the benchmarks on the CI, add the 'ci-bench'
label.
-->
As the title.
---------
Co-authored-by: Matt Mastracci <matthew@mastracci.com>
Fixes https://github.com/denoland/vscode_deno/issues/743.
```ts
const items: string[] = ['foo', 'bar', 'baz'];
items.map
// ->
items.map(callbackfn) // auto-completes with argument placeholders.
```
---
We have our own setting for `suggest.completeFunctionCalls`, which must
be enabled:
```js
{
"deno.suggest.completeFunctionCalls": true,
// Re-implementation of:
// "javascript.suggest.completeFunctionCalls": true,
// "typescript.suggest.completeFunctionCalls": true,
}
```
But before this commit the actual implementation had been left as a TODO.
Fixes https://github.com/denoland/vscode_deno/issues/843.
Prevents step results from being reported twice. Refactors
`LspTestReporter` to use a complete `(test_id, descriptor)` map instead
of a brittle `LspTestReporter::stack`.
Some people might get think they need to import from this directory,
which could cause confusion and duplicate dependencies. Additionally,
the `vendor` directory has special behaviour in the language server, so
importing from the folder will definitely cause confusion and issues
there.
This commit moves `snapshot_from_lockfile` function to [deno_npm
crate](https://github.com/denoland/deno_npm). This allows this function
to be called outside Deno CLI (in particular, Deno Deploy).
Renames the unstable `deno_modules` directory and corresponding settings
to `vendor` after feedback. Also causes the vendoring of the
`node_modules` directory which can be disabled via
`--node-modules-dir=false` or `"nodeModulesDir": false`.
This commit adds a "dot" reporter to "deno test" subcommand,
that can be activated using "--dot" flag.
It provides a concise output using:
- "." for passing test
- "," for ignored test
- "!" for failing test
User output is silenced and not printed to the console.
In non-TTY environments each result is printed on a separate line.
We weren't auto-discovering the deno.json in two cases:
1. A project that didn't have a deno.json and just added one.
2. After a syntax error in the deno.json.
This now rediscovers it in both these cases.
Closes https://github.com/denoland/vscode_deno/issues/867
…nclusion" (#19519)"
This reverts commit 28a4f3d0f5.
This change causes failures when used outside Deno repo:
```
============================================================
Deno has panicked. This is a bug in Deno. Please report this
at https://github.com/denoland/deno/issues/new.
If you can reliably reproduce this panic, include the
reproduction steps and re-run with the RUST_BACKTRACE=1 env
var set and include the backtrace in your report.
Platform: linux x86_64
Version: 1.34.3+b37b286
Args: ["/opt/hostedtoolcache/deno/0.0.0-b37b286f7fa68d5656f7c180f6127bdc38cf2cf5/x64/deno", "test", "--doc", "--unstable", "--allow-all", "--coverage=./cov"]
thread 'main' panicked at 'called `Result::unwrap()` on an `Err` value: Failed to read "/home/runner/work/deno/deno/core/00_primordials.js"
Caused by:
No such file or directory (os error 2)', core/runtime/jsruntime.rs:699:8
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
```
Relands #19463. This time the `ExtensionFileSourceCode` enum is
preserved, so this effectively just splits feature
`include_js_for_snapshotting` into `exclude_js_sources` and
`runtime_js_sources`, adds a `force_include_js_sources` option on
`extension!()`, and unifies `ext::Init_ops_and_esm()` and
`ext::init_ops()` into `ext::init()`.
… (#19463)"
This reverts commit ceb03cfb03.
This is being reverted because it causes 3.5Mb increase in the binary
size,
due to runtime JS code being included in the binary, even though it's
already snapshotted.
CC @nayeemrmn
This prevents documents specified in a deno.json's "exclude" from being
pre-loaded by the lsp.
For example, someone may have something like:
```jsonc
// deno.json
{
"exclude": [
"dist" // build directory
]
}
```
Remove `ExtensionFileSourceCode::LoadedFromFsDuringSnapshot` and feature
`include_js_for_snapshotting` since they leak paths that are only
applicable in this repo to embedders. Replace with feature
`exclude_js_sources`. Additionally the feature
`force_include_js_sources` allows negating it, if both features are set.
We need both of these because features are additive and there must be a
way of force including sources for snapshot creation while still having
the `exclude_js_sources` feature. `force_include_js_sources` is only set
for build deps, so sources are still excluded from the final binary.
You can also specify `force_include_js_sources` on any extension to
override the above features for that extension. Towards #19398.
But there was still the snapshot-from-snapshot situation where code
could be executed twice, I addressed that by making `mod_evaluate()` and
scripts like `core/01_core.js` behave idempotently. This allowed
unifying `ext::init_ops()` and `ext::init_ops_and_esm()` into
`ext::init()`.
Rather than disallowing `ext:` resolution, clear the module map after
initializing extensions so extension modules are anonymized. This
operation is explicitly called in `deno_runtime`. Re-inject `node:`
specifiers into the module map after doing this.
Fixes #17717.
This adds support for the lockfile and node_modules directory to the
lsp.
In the case of the node_modules directory, it is only enabled when
explicitly opted into via `"nodeModulesDir": true` in the configuration
file. This is to reduce the language server automatically modifying the
node_modules directory when the user doesn't want it to.
Closes #16510
Closes #16373
