This commit changes various CLI subcommands that have support for
the "--watch" flag to use initial current working directory when
resolving "main module".
This is part of migration towards explicitly passing current working
directory to "deno_core::resolve_url_or_path" API.
As a side effect this makes "deno <subcommand> --watch" more aligned to
user expectations, where calling "Deno.chdir()" during program doesn't
break watcher.
Towards landing https://github.com/denoland/deno/pull/15454
This commit changes current "deno_core::resolve_url_or_path" API to
"resolve_url_or_path_deprecated" and adds new "resolve_url_or_path"
API that requires to explicitly pass the directory from which paths
should be resolved to.
Some of the call sites were updated to use the new API, the reminder
of them will be updated in a follow up PR.
Towards landing https://github.com/denoland/deno/pull/15454
Creating the node_modules folder when the packages are already
downloaded can take a bit of time and not knowing what is going on can
be confusing. It's better to show a progress bar.
This has been bothering me for a while and it became more painful while
working on #18136 because injecting the shared progress bar became very
verbose. Basically we should move the creation of all these npm structs
up to a higher level.
This is a stepping stone for a future refactor where we can improve how
we create all our structs.
This commit removes "deno_core::RuntimeOptions::extensions_with_js".
Now it's embedders' responsibility to properly register extensions
that will not contains JavaScript sources when running from an existing
snapshot.
Prerequisite for https://github.com/denoland/deno/pull/18080
This commit partially reverts changes from
https://github.com/denoland/deno/pull/18095.
Turns out I made a mistake that became apparent when working
on removing "RuntimeOptions::extensions_with_js" in a follow up.
This commit splits "<ext_name>::init" functions into "init_ops" and
"init_ops_and_esm". That way we don't have to construct list of
ESM sources on each startup if we're running with a snapshot.
In a follow up commit "deno_core" will be changed to not have a split
between "extensions" and "extensions_with_js" - it will be embedders'
responsibility to pass appropriately configured extensions.
Prerequisite for https://github.com/denoland/deno/pull/18080
This improves peer dependency resolution yet again. We did not handle
scenarios like the following:
```
// a -> b -> c -> d -> c -> b (peer)
```
...which would maybe work ok the first time its run in some cases, but
then lead to a lockfile that would error on load.
This now keeps track of circular dependencies and updates nodes
accordingly. That said, there is still a lurking bug in this code
somewhere that I've added a comment for (there is a mitigation on the
tail end that seems to work well). The current state is much better than
before and I can look into it later. I think it's something small that's
incorrect.
```
Benchmark 1: deno run -A ../empty.js
Time (mean ± σ): 20.5 ms ± 0.5 ms [User: 13.4 ms, System: 5.1 ms]
Range (min … max): 19.8 ms … 24.0 ms 119 runs
Benchmark 2: target/release/deno run -A ../empty.js
Time (mean ± σ): 18.8 ms ± 0.3 ms [User: 13.0 ms, System: 4.9 ms]
Range (min … max): 18.3 ms … 19.9 ms 129 runs
```
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This is implemented in such a way that it should still allow processes
to go through when a file lock wasn't properly cleaned up and the OS
hasn't released it yet (but with a 200ms-ish delay).
Closes #18039
This commit renames "deno_core::InternalModuleLoader" to
"ExtModuleLoader" and changes the specifiers used by the
modules loaded from this loader to "ext:".
"internal:" scheme was really ambiguous and it's more characters than
"ext:", which should result in slightly smaller snapshot size.
Closes https://github.com/denoland/deno/issues/18020
Since we are snapshotting extension source at build time, there's no
need to define list of sources for the extension at runtime.
This commit changes "deno_node" extension by removing "init_polyfill"
function in favor of "init_polyfill_ops_and_esm()" and "init_polyfill_ops()".
The former is used during snapshot and when "deno_runtime" is compiled
with "dont_create_runtime_snapshot" cargo feature flag. The latter is used
when running a worker from an existing snapshot.
This is a start of a bigger refactor to all extensions - thanks to this
change, we don't have to iterate over all defined source files for extension at
runtime, and because of that we don't have to create a filepath for each of the
source files. It's not a big deal, but we are iterating over 300 files on each start,
and concatenating 3 strings before creating a "PathBuf" for ~200 of them.
This is already visible on the startup flamegraphs and should be avoided.
There's no point for this API to expect result. If something fails it should
result in a panic during build time to signal to embedder that setup is
wrong.
We use information about build in several extension crates like
"ext/node" or "runtime/". In an effort to move "fs" APIs to a separate
crate it is a prerequisite to have this information available outside
of the "runtime/" crate.
This commit moves definition of "build" object to "Deno.core" that is
later forwarded to "Deno.build".
JavaScript APIs from "runtime/js/40_files.js" combined abstractions
for stdio streams ("Stdout", "Stderr", "Stdin") and file system file
("File", "FsFile"). APIs from "runtime/js/40_read_file.js" and
"runtime/js/40_write_file.js" were implemented using ops from
"runtime/ops/fs.rs".
This file was removed and relevant APIs were moved to "deno_io/12_io.js"
and "runtime/js/30_fs.js".
This work is meant to enable factoring out "deno_fs" crate.
This commit changes "include_js_files!" macro from "deno_core"
in a way that "dir" option doesn't cause specifiers to be rewritten
to include it.
Example:
```
include_js_files! {
dir "js",
"hello.js",
}
```
The above definition required embedders to use:
`import ... from "internal:<ext_name>/js/hello.js"`.
But with this change, the "js" directory in which the files are stored
is an implementation detail, which for embedders results in:
`import ... from "internal:<ext_name>/hello.js"`.
The directory the files are stored in, is an implementation detail and
in some cases might result in a significant size difference for the
snapshot. As an example, in "deno_node" extension, we store the
source code in "polyfills" directory; which resulted in each specifier
to look like "internal:deno_node/polyfills/<module_name>", but with
this change it's "internal:deno_node/<module_name>".
Given that "deno_node" has over 100 files, many of them having
several import specifiers to the same extension, this change removes
10 characters from each import specifier.
denoland/eszip#115 added support for statically-analyzed dynamic imports
in eszip, which made `deno compile` support dynamic imports starting
from #17858. This PR adds a test for it.
----
This test is adapted from PR #17663.
Closes #17908
<!--
Before submitting a PR, please read http://deno.land/manual/contributing
1. Give the PR a descriptive title.
Examples of good title:
- fix(std/http): Fix race condition in server
- docs(console): Update docstrings
- feat(doc): Handle nested reexports
Examples of bad title:
- fix #7123
- update docs
- fix bugs
2. Ensure there is a related issue and it is referenced in the PR text.
3. Ensure there are tests that cover the changes.
4. Ensure `cargo test` passes.
5. Ensure `./tools/format.js` passes without changing files.
6. Ensure `./tools/lint.js` passes.
7. Open as a draft PR if your work is still in progress. The CI won't
run
all steps, but you can add '[ci]' to a commit message to force it to.
8. If you would like to run the benchmarks on the CI, add the 'ci-bench'
label.
-->
This commit updates deno_lint crate to 0.41.0. The new version contains
a braking change that requries a minor code fix here, which is also
addressed in this commit.
This lazily does an "npm install" when any package name matches what's
found in the package.json or when running a script from package.json
with deno task.
Part of #17916
Closes #17928
This is a super basic initial implementation. We don't create a
`node_modules/.bin` folder at the moment and add it to the PATH like we
should which is necessary to make command name resolution in the
subprocess work properly (ex. you run a script that launches another
script that then tries to launch an "npx command"... this won't work
atm).
Closes #17492
This commit enables resolution of "bare specifiers" (eg. "import express
from 'express';") if a "package.json" file is discovered.
It's a step towards being able to run projects authored for Node.js
without any changes.
With this commit we are able to successfully run Vite projects without
any changes to the user code.
---------
Co-authored-by: David Sherret <dsherret@gmail.com>
This commit adds new "A" option to the interactive permission prompt, that will
allow all subsequent permissions for given group (domain). Ie. when querying for
permissions to access eg. env variables responding with "A" will allow access
to all environmental variables.
This works for all permission domains and should make permission prompts
more ergonomic for users.
This changes npm specifiers to be handled by deno_graph and resolved to
an npm package name and version when the specifier is encountered. It
also slightly changes how npm specifier resolution occurs—previously it
would collect all the npm specifiers and resolve them all at once, but
now it resolves them on the fly as they are encountered in the module
graph.
https://github.com/denoland/deno_graph/pull/232
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Deno.Command needs to be stabilized first and allow people to upgrade to
it before we can deprecate Deno.run. Otherwise lint will suddenly fail
with deprecated errors without giving people a chance to update.
This PR fixes peer dependency resolution to only resolve peers based on
the current graph traversal path. Previously, it would resolve a peers
by looking at a graph node's ancestors, which is not correct because
graph nodes are shared by different resolutions.
It also stores more information about peer dependency resolution in the
lockfile.
This allows to not include source code into the binary (because
it will already be included in the V8 snapshot).
Nothing changes for the embedders - everything should still build the
same.
This commit brings the binary size from 87Mb to 82Mb on M1.
Alternative to https://github.com/denoland/deno/pull/17820 and
https://github.com/denoland/deno/pull/17653
---------
Co-authored-by: Leo Kettmeir <crowlkats@toaxl.com>
This commits adds auto-discovery of "package.json" file when running
"deno run" and "deno task" subcommands. In case of "deno run" the
"package.json" is being looked up starting from the directory of the
script that is being run, stopping early if "deno.json(c)" file is found
(ie. FS tree won't be traversed "up" from "deno.json").
When "package.json" is discovered the "--node-modules-dir" flag is
implied, leading to creation of local "node_modules/" directory - we
did that, because most tools relying on "package.json" will expect
"node_modules/" directory to be present (eg. Vite). Additionally
"dependencies" and "devDependencies" specified in the "package.json"
are downloaded on startup.
This is a stepping stone to supporting bare specifier imports, but
the actual integration will be done in a follow up commit.
---------
Co-authored-by: David Sherret <dsherret@gmail.com>
This PR adds the remaining ~650 Node.js compat test cases from std/node.
Among these 650 cases, about 130 cases are now failing. These failing
cases are prefixed with `TODO:` in `tests/node_compat/config.json`.
These will be addressed in later PRs.
This commit changes definition of "ExtensionFileSource", by changing
"code" field to being "ExtensionFileSourceCode" enum. Currently the enum
has only a single variant "IncludedInBinary". It is done in preparation
to allow embedders to decide if they want to include the source code in the
binary when snapshotting (in most cases they shouldn't do that).
In the follow up commit we'll add more variants to
"ExtensionFileSourceCode".
"include_js_files_dir!" macro was removed in favor "include_js_files!"
macro which can now accept "dir" option.
The `NpmPackageId` struct is being renamed to `NpmPackageNodeId`. In a
future PR it will be moved down into only npm dependency resolution and
a `NpmPackageId` struct will be introduced in `deno_graph` that only has
the name and version of the package (no peer dependency identifier
information). So a `NpmPackageReq` will map to an `NpmPackageId`, which
will map to an `NpmPackageNodeId` in the npm resolution.
Adds two test files: "cli/tests/unit_node/process_test.ts" and
"cli/tests/unit_node/child_process_test.ts"
---------
Co-authored-by: Yoshiya Hinosawa <stibium121@gmail.com>
This PR changes Node.js/npm compatibility layer to use polyfills for
built-in Node.js
embedded in the snapshot (that are coming from "ext/node" extension).
As a result loading `std/node`, either from
"https://deno.land/std@<latest>/" or
from "DENO_NODE_COMPAT_URL" env variable were removed. All code that is
imported via "npm:" specifiers now uses code embedded in the snapshot.
Several fixes were applied to various modules in "ext/node" to make
tests pass.
---------
Co-authored-by: Yoshiya Hinosawa <stibium121@gmail.com>
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
This commit moves "deno_std/node" in "ext/node" crate. The code is
transpiled and snapshotted during the build process.
During the first pass a minimal amount of work was done to create the
snapshot, a lot of code in "ext/node" depends on presence of "Deno"
global. This code will be gradually fixed in the follow up PRs to migrate
it to import relevant APIs from "internal:" modules.
Currently the code from snapshot is not used in any way, and all
Node/npm compatibility still uses code from
"https://deno.land/std/node" (or from the location specified by
"DENO_NODE_COMPAT_URL"). This will also be handled in a follow
up PRs.
---------
Co-authored-by: crowlkats <crowlkats@toaxl.com>
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
Co-authored-by: Yoshiya Hinosawa <stibium121@gmail.com>
This commit stabilizes Node-API, the "--unstable" flag is no longer
required to load native extensions. "--allow-ffi" permission is still
required to load them.
Compressing the TSC snapshot in debug build took
~45s on M1 MacBook Pro; without compression it took ~1s.
Thus we're not not using compressed snapshot, trading off
a lot of build time for some startup time in debug build.
This was not caught in the previous test case, as the response body was
smaller than the size of `HEAD` response.
This made `nwritten < responseLen` check in `writeFixedResponse` to
fail, and not trigger `op_flash_respond_async` as a result.
When the response body is larger than the `HEAD` though, as in the
updated test case (`HEAD` i 120 bytes, where our response is 300 bytes),
it would think that we still have something to send, and effectively
panic, as `op_flash_respond` already removed the request from the pool.
This change, makes the `handleResponse` function always calculate the
number of bytes to transmit when `HEAD` request is encountered.
Effectively ignoring `Content-Length` of the body, but still setting it
correctly in the request header itself.
Fixes https://github.com/denoland/deno/issues/17737
This commit moves some code around from "cli/node/mod.rs" to
"ext/node". Additionally "ext/node" was changed to factor out
"ops.rs" and "polyfill.rs" modules.
This change makes absolute urls, that contain no path like `deno install
https://my-cli.io` to follow redirects and extract the name from it.
It allows modifies `test_util` server listener on port `4550`
(`REDIRECT_ABSOLUTE_PORT`) to allow for specifying `redirect_to` query
param, that fill use that value for it's next redirect.
Fixes https://github.com/denoland/deno/issues/17409
This commit does preparatory work to allow snapshotting Node.js
compatibility layer, that currently lives in `std/node`. The logic was
changed to allow loading some modules from the snapshot and
some from the remote URL.
Additionally "module_es_shim.js" that provides exports for "node:module"
is now snapshotted.
This is a proof of concept for being able to snapshot TypeScript files.
Currently only a single runtime file is authored in TypeScript -
"runtime/js/01_version.ts".
Not needed infrastructure was removed from "core/snapshot_util.rs".
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This PR refactors all internal js files (except core) to be written as
ES modules.
`__bootstrap`has been mostly replaced with static imports in form in
`internal:[path to file from repo root]`.
To specify if files are ESM, an `esm` method has been added to
`Extension`, similar to the `js` method.
A new ModuleLoader called `InternalModuleLoader` has been added to
enable the loading of internal specifiers, which is used in all
situations except when a snapshot is only loaded, and not a new one is
created from it.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
- Generalizes the npm version code (ex. `NpmVersion` -> `Version`,
`NpmVersionReq` -> `VersionReq`). This is a slow refactor towards
extracting out this code for deno specifiers and better usage in
deno_graph.
- Removes `SpecifierVersionReq`. Consolidates `NpmVersionReq` and
`SpecifierVersionReq` to just `VersionReq`
- Removes `NpmVersionMatcher`. This now just looks at `VersionReq`.
- Paves the way to allow us to create `NpmPackageReference`'s from a
package.json's dependencies/dev dependencies
(`VersionReq::parse_from_npm`).
This commit changes handling of config file to enable
specifying "imports" and "scopes" objects effectively making
the configuration file an import map.
"imports" and "scopes" take precedence over "importMap" configuration,
but have lower priority than "--importmap" CLI flag.
Co-authored-by: David Sherret <dsherret@users.noreply.github.com>
Co-authored-by: David Sherret <dsherret@gmail.com>
This commit adds sync versions of async APIs to "Deno.permissions"
namespace.
Following APIs were added:
- "Deno.permissions.querySync"
- "Deno.permissions.requestSync"
- "Deno.permissions.revokeSync"
Allows to change behavior of `deno fmt` to use "ASI" setting for
semicolons instead of always prefering them, this is done
by "--options-semi=asi" flag or `"semi": "asi"` setting
in the config file.
This commit removes "Deno.core" namespace. It is strictly private API
that has no stability guarantees, we were supposed to remove it long time ago.
Co-authored-by: Yoshiya Hinosawa <stibium121@gmail.com>
This change prints a link to the release notes to `deno upgrade` output
and its variations.
Release notes aren't printed for commands relating to canary versions.
Closes #16350.
<!--
Before submitting a PR, please read http://deno.land/manual/contributing
1. Give the PR a descriptive title.
Examples of good title:
- fix(std/http): Fix race condition in server
- docs(console): Update docstrings
- feat(doc): Handle nested reexports
Examples of bad title:
- fix #7123
- update docs
- fix bugs
2. Ensure there is a related issue and it is referenced in the PR text.
3. Ensure there are tests that cover the changes.
4. Ensure `cargo test` passes.
5. Ensure `./tools/format.js` passes without changing files.
6. Ensure `./tools/lint.js` passes.
7. Open as a draft PR if your work is still in progress. The CI won't
run
all steps, but you can add '[ci]' to a commit message to force it to.
8. If you would like to run the benchmarks on the CI, add the 'ci-bench'
label.
-->
The way the standalone mode handles the `--cert` flag is different to
all other modes. This is because `--cert` takes a path to the
certificate file, which is directly added to the root cert store; except
for compile mode, where its byte contents are stored in the standalone
metadata, and they are added to the root cert store after the
`ProcState` is created.
This change instead changes `Flags::ca_file` (an `Option<String>`) into
`Flags::ca_data`, which can represent a `String` file path or a
`Vec<u8>` with the certificate contents. That way, standalone mode can
create a `ProcState` whose root cert store alreay contains the
certificate.
This change also adds a tests for certificates in standalone mode, since
there weren't any before.
This refactor will help with implementing web workers in standalone mode
in the future.
Updated third_party dlint to v0.37.0 for GitHub Actions. This PR
includes following changes:
* fix(prefer-primordials): Stop using array pattern assignments
* fix(prefer-primordials): Stop using global intrinsics except for
`SharedArrayBuffer`
* feat(guard-for-in): Apply new guard-for-in rule
I'm not sure this properly handles scenarios where an npm package uses
an alias that resolves to itself, we can fix that if we find a package
that actually depends on that behavior.
Closes #17420
The leading cause of the problem was that `handleResponse` has
`tryRespondChunked` passed as an argument, which in turn is implemented
as a call to `core.ops.op_try_flash_respond_chuncked`, that throws in
the repro code.
`handleResponse` was not handled correctly, as it not returned any
value, and had no `catch` attached to it.
It also effectively was never correctly handled inside two other blocks
with `resp.then` and `PromisePrototypeCatch(PromisePrototypeThen(resp,
"..."))` as well, as it just short-circuited the promise with an empty
resolve, instead of relying on the last `(async () => {})` block.
This change makes `handleResponse` return a correct value and attach
`onError` handler to the "non-thenable" variant of response handling
code.
This commit removes the libuv pollyfills introduced with Node-API
support.
It is too much Node-specific. Most Node-API modules that depend on libuv
are already giving up the benefits of Node-API. We should rather
encourage modules to use `ThreadSafeFunction` or `AsyncWork` to
interface with the event loop.
Relevant discussion a few months ago:
https://github.com/denoland/deno/pull/13633#discussion_r904916178
cc @bartlomieju
This commit changes "ProcState" to store "file_fetcher" field in an "Arc",
allowing it to be preserved between restarts and thus keeping the state
alive between the restarts. File watchers for "deno test" and "deno bench"
now reset "ProcState" between restarts.
This commit changes signature of "deno_core::ModuleLoader::resolve" to pass
an enum indicating whether or not we're resolving a specifier for dynamic import.
Additionally "CliModuleLoader" was changes to store both "parent permissions" (or
"root permissions") as well as "dynamic permissions" that allow to check for permissions
in top-level module load an dynamic imports.
Then all code paths that have anything to do with Node/npm compat are now checking
for permissions which are passed from module loader instance associated with given
worker.
This PR updates the name used in `clap::Arg::value_name` for the
`--inspect*` flags from `HOST:PORT` to `HOST_AND_PORT` because the
former causes an arguments error when using shell completions in the
`zsh` shell.
Adds support for passing and returning structs as buffers to FFI. This does not implement fastapi support for structs. Needed for certain system APIs such as AppKit on macOS.
Turns out we were cloning permissions which after prompting were discarded,
so the state of permissions was never preserved. To handle that we need to store
all permissions behind "Arc<Mutex<>>" (because there are situations where we
need to send them to other thread).
Testing and benching code still uses "Permissions" in most places - it's undesirable
to share the same permission set between various test/bench files - otherwise
granting or revoking permissions in one file would influence behavior of other test
files.
If an optional peer dependency entry previously wasn't resolved and it's
now being resolved, then it will add it as if it were a dependency of
the previously resolved package instead of creating a new "copy package"
(seems to be what npm and pnpm does).
Closes #17240
Previously, `Deno.permissions.[revoke|request]()` wouldn't correctly
process the `path: URL` when `name` was `ffi`. This change fixes that
behaviour and adds a new function, `formDescriptor()`, to ensure `URL`
arguments are consistently handled across
`Deno.permissions.[query|revoke|request]()`.
This commit fixes "Add all missing imports" quick fix; before
it was replacing all occurrences with the same specifier. Now
every line returned from TSC is processed individually.
This commit adds "Deno.Conn.ref()" and "Deno.Conn.unref()" methods.
These methods can be used to make connection block or not block the
event loop from finishing. Refing/unrefing only influences "read"
operations - ie. scheduling writes to a connection _do_ keep event
loop alive.
Required for https://github.com/denoland/deno/issues/16710
This commit fixes handling of rejected promises in dynamic imports
evaluation.
Previously we were running callbacks for next ticks and macrotasks
_before_ polling
dynamic imports and checked for unhandled rejections immediately after.
This is wrong,
as `unhandledrejection` event is dispatched and its callbacks are run as
macrotasks.
This commit changes order of actions performed by the event loop to
following:
- poll async ops
- poll dynamic imports
- run next tick callbacks
- run macrotask callbacks
- check for unhandled promise rejections
This commit fixes formatting of JSError with "errors" property. Before this
commit all instances of "Error" were treated as if they were "AggregateError"
if they had "errors" property. After this commit only actual instances of
"AggregateError" are formatted in such a way, while instances of "Error"
that have "errors" property are formatted without showing details of "errors".
Previously, errored streaming response bodies did not cause the HTTP
stream to be aborted. It instead caused the stream to be closed gracefully,
which had the result that the client could not detect the difference
between a successful response and an errored response.
This commit fixes the issue by aborting the stream on error.
This PR adds the concept of a global `DrawThread`, which can receive
multiple renderers to draw information on the screen (note: the
underlying thread is released back to tokio when it's not rendering). It
also separates the concept of progress bars from the existing "draw
thread". This makes it trivial for us to do stuff like show permission
prompts and progress bars at the same time in the future.
The reason this is global is because the process' tty stderr is also a
global concept.
Right now an error in a request body stream causes an uncatchable
global promise rejection. This PR fixes this to instead propagate the
error correctly into the promise returned from `fetch`.
It additionally fixes errored readable stream bodies being treated as
successfully completed bodies by Rust.
The output of `init` are commands, so this should be treated as a "Shell
script". In Shell script, comments must start with `#`, not `//`. (This
also makes the commands example easier to be copied to somewhere.)
This commit changes implementation of "Deno.memoryUsage()" to return
correct value for "rss" field. To do that we implement a specialized function
per os to retrieve this information.
