Before this PR, we didn't have any integration tests set up for the
`jupyter` subcommand.
This PR adds a basic jupyter client and helpers for writing integration
tests for the jupyter kernel. A lot of the code here is boilerplate,
mainly around the message format for jupyter.
This also adds a few basic integration tests, most notably for
requesting execution of a snippet of code and getting the correct
results.
This patch gets JUnit reporter to output more detailed information for
test steps (subtests).
## Issue with previous implementation
In the previous implementation, the test hierarchy was represented using
several XML tags like the following:
- `<testsuites>` corresponds to the entire test (one execution of `deno
test` has exactly one `<testsuites>` tag)
- `<testsuite>` corresponds to one file, such as `main_test.ts`
- `<testcase>` corresponds to one `Deno.test(...)`
- `<property>` corresponds to one `t.step(...)`
This structure describes the test layers but one problem is that
`<property>` tag is used for any use cases so some tools that can ingest
a JUnit XML file might not be able to interpret `<property>` as
subtests.
## How other tools address it
Some of the testing frameworks in the ecosystem address this issue by
fitting subtests into the `<testcase>` layer. For instance, take a look
at the following Go test file:
```go
package main_test
import "testing"
func TestMain(t *testing.T) {
t.Run("child 1", func(t *testing.T) {
// OK
})
t.Run("child 2", func(t *testing.T) {
// Error
t.Fatal("error")
})
}
```
Running [gotestsum], we can get the output like this:
```xml
<?xml version="1.0" encoding="UTF-8"?>
<testsuites tests="3" failures="2" errors="0" time="1.013694">
<testsuite tests="3" failures="2" time="0.510000" name="example/gosumtest" timestamp="2024-03-11T12:26:39+09:00">
<properties>
<property name="go.version" value="go1.22.1 darwin/arm64"></property>
</properties>
<testcase classname="example/gosumtest" name="TestMain/child_2" time="0.000000">
<failure message="Failed" type="">=== RUN TestMain/child_2
 main_test.go:12: error
--- FAIL: TestMain/child_2 (0.00s)
</failure>
</testcase>
<testcase classname="example/gosumtest" name="TestMain" time="0.000000">
<failure message="Failed" type="">=== RUN TestMain
--- FAIL: TestMain (0.00s)
</failure>
</testcase>
<testcase classname="example/gosumtest" name="TestMain/child_1" time="0.000000"></testcase>
</testsuite>
</testsuites>
```
This output shows that nested test cases are squashed into the
`<testcase>` layer by treating them as the same layer as their parent,
`TestMain`. We can still distinguish nested ones by their `name`
attributes that look like `TestMain/<subtest_name>`.
As described in #22795, [vitest] solves the issue in the same way as
[gotestsum].
One downside of this would be that one test failure that happens in a
nested test case will end up being counted multiple times, because not
only the subtest but also its wrapping container(s) are considered to be
failures. In fact, in the [gotestsum] output above, `TestMain/child_2`
failed (which is totally expected) while its parent, `TestMain`, was
also counted as failure. As
https://github.com/denoland/deno/pull/20273#discussion_r1307558757
pointed out, there is a test runner that offers flexibility to prevent
this, but I personally don't think the "duplicate failure count" issue
is a big deal.
## How to fix the issue in this patch
This patch fixes the issue with the same approach as [gotestsum] and
[vitest].
More specifically, nested test cases are put into the `<testcase>` level
and their names are now represented as squashed test names concatenated
by `>` (e.g. `parent 2 > child 1 > grandchild 1`). This change also
allows us to put a detailed error message as `<failure>` tag within the
`<testcase>` tag, which should be handled nicely by third-party tools
supporting JUnit XML.
## Extra fix
Also, file paths embedded into XML outputs are changed from absolute
path to relative path, which is helpful when running the test suites in
several different environments like CI.
Resolves #22795
[gotestsum]: https://github.com/gotestyourself/gotestsum
[vitest]: https://vitest.dev/
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Fixes #19214.
We were using the `idna` crate to implement our polyfill for
`punycode.toASCII` and `punycode.toUnicode`. The `idna` crate is
correct, and adheres to the IDNA2003/2008 spec, but it turns out
`node`'s implementations don't really follow any spec! Instead, node
splits the domain by `'.'` and punycode encodes/decodes each part. This
means that node's implementations will happily work on codepoints that
are disallowed by the IDNA specs, causing the error in #19214.
While fixing this, I went ahead and matched the node behavior on all of
the punycode functions and enabled node's punycode test in our
`node_compat` suite.
This is an unrealistic scenario, but it's still a good thing to fix and
have a test for because it probably fixes some other underlying issues
with how the gitignore was being resolved for the root directory.
From https://github.com/denoland/deno/pull/22720#issuecomment-1986134425
This allows explicitly overriding a .gitignore by specifying files and
directories in "include". This does not apply to globs in an include as
files matching those will still be gitignored. Additionally,
individually gitignored files within an included directory will still be
ignored.
1. Stops `deno publish` using some custom include/exclude behaviour from
other sub commands
2. Takes ancestor directories into account when resolving gitignore
3. Backards compatible change that adds ability to unexclude an exclude
by using a negated glob at a more specific level for all sub commands
(see https://github.com/denoland/deno_config/pull/44).
An undocumented "DENO_DISABLE_PEDANTIC_NODE_WARNINGS" env
var can be used to silence warnings for sloppy imports and node builtins
without `node:` prefix.
The diagnostic was incorrect when importing a `.js` file with a
corresponding `.d.ts` file with sloppy imports because it would say to
change the `.js` extension to `.d.ts`, which is incorrect. We might as
well just hide this diagnostic.
Improves #19100
Fixes #20356
Replaces #20428
Changes made in deno_core to support this:
- [x] Errors must be handled in setTimeout callbacks
- [x] Microtask ordering is not-quite-right
- [x] Timer cancellation must be checked right before dispatch
- [x] Timer sanitizer
- [x] Move high-res timer to deno_core
- [x] Timers need opcall tracing
This commit adds "deno add" subcommand that has a basic support for
adding "jsr:" packages to "deno.json" file.
This currently doesn't support "npm:" specifiers and specifying version
constraints.
Some `deno_std` tests were failing to print output that was resolved
after the last test finished. In addition, output printed before tests
began would sometimes appear above the "running X tests ..." line, and
sometimes below it depending on timing.
We now guarantee that all output is flushed before and after tests run,
making the output consistent.
Pre-test and post-test output are captured in `------ pre-test output
------` and `------ post-test output ------` blocks to differentiate
them from the regular output blocks.
Here's an example of a test (that is much noisier than normal, but an
example of what the output will look like):
```
Check ./load_unload.ts
------- pre-test output -------
load
----- output end -----
running 1 test from ./load_unload.ts
test ...
------- output -------
test
----- output end -----
test ... ok ([WILDCARD])
------- post-test output -------
unload
----- output end -----
```
A security feature of JSR is that it is self contained other than npm
dependencies. At publish time, the registry rejects packages that write
code like this:
```ts
const data = await import("https://example.com/evil.js");
```
However, this can be trivially bypassed by writing code that the
registry cannot statically analyze for. This PR prevents Deno from
loading dynamic imports that do this.
As we add tracing to more types of runtime activity, `--trace-ops` is
less useful of a name. `--trace-leaks` better reflects that this feature
traces both ops and timers, and will eventually trace resource opening
as well.
This keeps `--trace-ops` as an alias for `--trace-leaks`, but prints a
warning to the console suggesting migration to `--trace-leaks`.
One test continues to use `--trace-ops` to test the deprecation warning.
---------
Signed-off-by: Matt Mastracci <matthew@mastracci.com>
Supply chain security for JSR.
```
$ deno publish --provenance
Successfully published @divy/test_provenance@0.0.3
Provenance transparency log available at https://search.sigstore.dev/?logIndex=73657418
```
0. Package has been published.
1. Fetches the version manifest and verifies it's matching with uploaded
files and exports.
2. Builds the attestation SLSA payload using Github actions env.
3. Creates an ephemeral key pair for signing the github token
(aud=sigstore) and DSSE pre authentication tag.
4. Requests a X.509 signing certificate from Fulcio using the challenge
and ephemeral public key PEM.
5. Prepares a DSSE envelop for Rekor to witness. Posts an intoto entry
to Rekor and gets back the transparency log index.
6. Builds the provenance bundle and posts it to JSR.
<!--
Before submitting a PR, please read
https://docs.deno.com/runtime/manual/references/contributing
1. Give the PR a descriptive title.
Examples of good title:
- fix(std/http): Fix race condition in server
- docs(console): Update docstrings
- feat(doc): Handle nested reexports
Examples of bad title:
- fix #7123
- update docs
- fix bugs
2. Ensure there is a related issue and it is referenced in the PR text.
3. Ensure there are tests that cover the changes.
4. Ensure `cargo test` passes.
5. Ensure `./tools/format.js` passes without changing files.
6. Ensure `./tools/lint.js` passes.
7. Open as a draft PR if your work is still in progress. The CI won't
run
all steps, but you can add '[ci]' to a commit message to force it to.
8. If you would like to run the benchmarks on the CI, add the 'ci-bench'
label.
-->
This PR enhances the `deno publish` command to infer dependencies from
`package.json` if present.
1. Renames zap/fast-check to instead be a `no-slow-types` lint rule.
1. This lint rule is automatically run when doing `deno lint` for
packages (deno.json files with a name, version, and exports field)
1. This lint rules still occurs on publish. It can be skipped by running
with `--no-slow-types`
If we strip out unprintable chars, we don't see the full filename being
requested by permission prompts. Instead, we highlight and escape them
to make them visible.
This changes the lockfile to not store JSR specifiers in the "remote"
section. Instead a single JSR integrity is stored per package in the
lockfile, which is a hash of the version's `x.x.x_meta.json` file, which
contains hashes for every file in the package. The hashes in this file
are then compared against when loading.
Additionally, when using `{ "vendor": true }` in a deno.json, the files
can be modified without causing lockfile errors—the checksum is only
checked when copying into the vendor folder and not afterwards
(eventually we should add this behaviour for non-jsr specifiers as
well). As part of this change, the `vendor` folder creation is not
always automatic in the LSP and running an explicit cache command is
necessary. The code required to track checksums in the LSP would have
been too complex for this PR, so that all goes through deno_graph now.
The vendoring is still automatic when running from the CLI.
This implementation heavily depends on there being a lockfile, meaning
JSR specifiers will always diagnose as uncached unless it's there. In
practice this affects cases where a `deno.json` isn't being used. Our
NPM specifier support isn't subject to this.
The reason for this is that the version constraint solving code is
currently buried in `deno_graph` and not usable from the LSP, so the
only way to reuse that logic is the solved-version map in the lockfile's
`packages.specifiers`.
This looks like a massive PR, but it's only a move from cli/tests ->
tests, and updates of relative paths for files.
This is the first step towards aggregate all of the integration test
files under tests/, which will lead to a set of integration tests that
can run without the CLI binary being built.
While we could leave these tests under `cli`, it would require us to
keep a more complex directory structure for the various test runners. In
addition, we have a lot of complexity to ignore various test files in
the `cli` project itself (cargo publish exclusion rules, autotests =
false, etc).
And finally, the `tests/` folder will eventually house the `test_ffi`,
`test_napi` and other testing code, reducing the size of the root repo
directory.
For easier review, the extremely large and noisy "move" is in the first
commit (with no changes -- just a move), while the remainder of the
changes to actual files is in the second commit.
