Partially supersedes #19016.
This migrates `spawn` and `spawn_blocking` to `deno_core`, and removes
the requirement for `spawn` tasks to be `Send` given our single-threaded
executor.
While we don't need to technically do anything w/`spawn_blocking`, this
allows us to have a single `JoinHandle` type that works for both cases,
and allows us to more easily experiment with alternative
`spawn_blocking` implementations that do not require tokio (ie: rayon).
Async ops (+~35%):
Before:
```
time 1310 ms rate 763358
time 1267 ms rate 789265
time 1259 ms rate 794281
time 1266 ms rate 789889
```
After:
```
time 956 ms rate 1046025
time 954 ms rate 1048218
time 924 ms rate 1082251
time 920 ms rate 1086956
```
HTTP serve (+~4.4%):
Before:
```
Running 10s test @ http://localhost:4500
2 threads and 10 connections
Thread Stats Avg Stdev Max +/- Stdev
Latency 68.78us 19.77us 1.43ms 86.84%
Req/Sec 68.78k 5.00k 73.84k 91.58%
1381833 requests in 10.10s, 167.36MB read
Requests/sec: 136823.29
Transfer/sec: 16.57MB
```
After:
```
Running 10s test @ http://localhost:4500
2 threads and 10 connections
Thread Stats Avg Stdev Max +/- Stdev
Latency 63.12us 17.43us 1.11ms 85.13%
Req/Sec 71.82k 3.71k 77.02k 79.21%
1443195 requests in 10.10s, 174.79MB read
Requests/sec: 142921.99
Transfer/sec: 17.31MB
```
Suggested-By: alice@ryhl.io
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This removes `ProcState` and replaces it with a new `CliFactory` which
initializes our "service structs" on demand. This isn't a performance
improvement at the moment for `deno run`, but might unlock performance
improvements in the future.
Fixes regression from #18878 where `Promise.reject()`,
`Promise.reject(undefined)` and `reportError(undefined)` panic in the
REPL.
Fixes `throw undefined` printing `Uncaught Unknown exception` instead of
`Uncaught undefined`.
Fixes #8858.
Fixes #8869.
```
$ target/debug/deno
Deno 1.32.5
exit using ctrl+d, ctrl+c, or close()
REPL is running with all permissions allowed.
To specify permissions, run `deno repl` with allow flags.
> Promise.reject(new Error("bar"));
Promise { <rejected> Error: bar
at <anonymous>:2:16 }
Uncaught (in promise) Error: bar
at <anonymous>:2:16
> reportError(new Error("baz"));
undefined
Uncaught Error: baz
at <anonymous>:2:13
>
1. Fixes a cosmetic issue in the repl where it would display lsp warning
messages.
2. Lazily loads dependencies from the package.json on use.
3. Supports using bare specifiers from package.json in the REPL.
Closes #17929
Closes #18494
1. Rewrites the tests to be more back and forth rather than getting the
output all at once (which I believe was causing the hangs on linux and
maybe mac)
2. Runs the pty tests on the linux ci.
3. Fixes a bunch of tests that were just wrong.
4. Adds timeouts on the pty tests.
Moving some code around in `ext/node` is it's a bit better well defined
and makes it possible for others to embed it.
I expect to see no difference in startup perf with this change.
These functions don't need to be async, as they are only calling
synchronous JavaScript code. As a follow up, all 3 functions
should be merge together - this will reduce roundtrips for
calling V8 from Rust, which is somewhat expensive
Closes #17831. This change hides the indices of any indexed collection
when triggering tab completion for object properties in the REPL.
An example is shown in the issue, but for verbosity here is another.
Before the change:
```
> const arr = new Uint8ClampedArray([1, 2, 3])
undefined
> arr.
0 map
1 reverse
2 reduce
...
```
After the change:
```
> const arr = new Uint8ClampedArray([1, 2, 3])
undefined
> arr.
constructor reduce
BYTES_PER_ELEMENT reduceRight
buffer set
...
```
Co-authored-by: David Sherret <dsherret@users.noreply.github.com>
These methods are confusing because the arguments are backwards. I feel
like they should have never been added to `Option<T>` and that clippy
should suggest rewriting to
`map(...).unwrap_or(...)`/`map(...).unwrap_or_else(|| ...)`
https://github.com/rust-lang/rfcs/issues/1025
This commit changes current "deno_core::resolve_url_or_path" API to
"resolve_url_or_path_deprecated" and adds new "resolve_url_or_path"
API that requires to explicitly pass the directory from which paths
should be resolved to.
Some of the call sites were updated to use the new API, the reminder
of them will be updated in a follow up PR.
Towards landing https://github.com/denoland/deno/pull/15454
This PR fixes peer dependency resolution to only resolve peers based on
the current graph traversal path. Previously, it would resolve a peers
by looking at a graph node's ancestors, which is not correct because
graph nodes are shared by different resolutions.
It also stores more information about peer dependency resolution in the
lockfile.
This PR changes Node.js/npm compatibility layer to use polyfills for
built-in Node.js
embedded in the snapshot (that are coming from "ext/node" extension).
As a result loading `std/node`, either from
"https://deno.land/std@<latest>/" or
from "DENO_NODE_COMPAT_URL" env variable were removed. All code that is
imported via "npm:" specifiers now uses code embedded in the snapshot.
Several fixes were applied to various modules in "ext/node" to make
tests pass.
---------
Co-authored-by: Yoshiya Hinosawa <stibium121@gmail.com>
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
This commit moves some code around from "cli/node/mod.rs" to
"ext/node". Additionally "ext/node" was changed to factor out
"ops.rs" and "polyfill.rs" modules.
Turns out we were cloning permissions which after prompting were discarded,
so the state of permissions was never preserved. To handle that we need to store
all permissions behind "Arc<Mutex<>>" (because there are situations where we
need to send them to other thread).
Testing and benching code still uses "Permissions" in most places - it's undesirable
to share the same permission set between various test/bench files - otherwise
granting or revoking permissions in one file would influence behavior of other test
files.
In our `require()` implementation we use a special logic to resolve
"base path" when looking for matching packages, however this logic
is in contradiction to what needs to happen if there's a local
"node_modules"
directory used. This commit changes require implementation to be aware
if we're running off of global node modules cache or a local one.
This commit changes "deno repl" command to run with no permissions by
default and accept "--allow-*" flags.
This change is dictated by the fact that currently there is no way to
run REPL with limited permissions. Technically it's a breaking
change in the CLI command, but there's agreement in the team
that it has merit and it's a good solution.
Running just "deno" command still starts the REPL with full permissions
allowed, but now a banner is printed to inform users about that:
With trial and error I found that most debuggers expect "isDefault" to be sent
in "auxData" field of "executionContextCreated" notification. This stems from
the fact that Node.js sends this data and eg. VSCode requires it to close
connection to the debugger when the program finishes execution.
This commit changes history handling of the REPL.
There were some situations were history wasn't properly saved and flushed to a
file, making history very spotty. This commit changes it to save every line into
the history file and flush it to disk before being evaluated.
Thanks to this all lines, including "close()" will be stored in the history
file.
If for any reason we're not able to save history file, a single warning will be
printed to the REPL and it will continue to work, even if subsequent tries will
fail to save to disk.
This commit adds support for "--eval-file" in "deno repl" subcommand.
This flag can be used to pass paths or URLs to files, that will be executed
on REPL startup. All files will be executed in the same context as the REPL
(ie. as "plain old scripts", not ES modules), sharing the global scope.
This feature allows to implement custom REPLs on top of Deno's REPL.
Fixes "op_set_exit_code" by sharing a single "Arc" between
all workers (via "op state") instead of having a "global" value stored in
"deno_runtime" crate. As a consequence setting an exit code is always
scoped to a tree of workers, instead of being overridable if there are
multiple worker tree (like in "deno test --jobs" subcommand).
Refactored "cli/main.rs" functions to return "Result<i32, AnyError>" instead
of "Result<(), AnyError>" so they can return exit code.
