* cts support
* better cjs/cts type checking
* deno compile cjs/cts support
* More efficient detect cjs (going towards stabilization)
* Determination of whether .js, .ts, .jsx, or .tsx is cjs or esm is only
done after loading
* Support `import x = require(...);`
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Fixes https://github.com/denoland/deno/issues/26505
I'm not exactly sure how this case comes about (I tried to write tests
for it but couldn't manage to reproduce it), but what happens is the
parent filename ends up null, and we bail out of resolving the specifier
in package exports.
I've checked, and in node the parent filename is also null (so that's
not a bug on our part), but node continues to resolve even in that case.
So this PR should match node's behavior more closely than we currently
do.
Fixes the original issue reported in #26404. storybook runs into other
errors after this PR (the new errors will be fixed in other PRs).
Some code used by a dependency of storybook does a [string comparison on
the error
message](ce30b2be34/node-src/lib/getConfiguration.ts (L88-L92))
thrown here to check for a file not found error.
While testing, I found out that light-my-request relies on
`ServerResponse.connection`, which is deprecated, so I added that and
`socket`, the non deprecated property.
It also relies on an undocumented `_header` property, apparently for
[raw header
processing](https://github.com/fastify/light-my-request/blob/v6.1.0/lib/response.js#L180-L186).
I added it as an empty string, feel free to provide other approaches.
Fixes #19901
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Fixes the issue described in
https://github.com/denoland/deno/issues/23882#issuecomment-2423316362.
The parent was starting to send a message right before the process would
exit, and the channel closed in the middle of the write. Unlike with
reads, we weren't cancelling the pending writes, which resulted in a
`Broken pipe` error surfacing to the user.
This is the release commit being forwarded back to main for 2.0.2
Co-authored-by: bartlomieju <bartlomieju@users.noreply.github.com>
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Fixes https://github.com/denoland/deno/issues/26115.
We weren't normalizing the headers to lower case, so code that attempted
to delete the `Content-Length` header (but used a different case) wasn't
actually removing the header.
This is the release commit being forwarded back to main for 2.0.1
Co-authored-by: bartlomieju <bartlomieju@users.noreply.github.com>
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
partially unblocks #25470
This PR aligns the resolution of `localhost` hostname to Node.js
behavior.
In Node.js `dns.lookup("localhost", (_, addr) => console.log(addr))`
prints ipv6 address `::1`, but it prints ipv4 address `127.0.0.1` in
Deno. That difference causes some errors in the work of enabling
`createConnection` option in `http.request` (#25470). This PR fixes the
issue by aligning `dns.lookup` behavior to Node.js.
This PR also changes the following behaviors (resolving TODOs):
- `http.createServer` now listens on ipv6 address `[::]` by default on
linux/mac
- `net.createServer` now listens on ipv6 address `[::]` by default on
linux/mac
These changes are also alignments to Node.js behaviors.
Fixes https://github.com/denoland/deno/issues/26177
The significant delay was caused by Nagel's algorithm + delayed ACKs in
Linux kernels. Here's the [kernel
patch](https://lwn.net/Articles/502585/) which added 40ms
`tcp_default_delack_min`
```
$ deno run -A pg-bench.mjs # main
Tue Oct 15 2024 12:27:22 GMT+0530 (India Standard Time): 42ms
$ target/release/deno run -A pg-bench.mjs # this patch
Tue Oct 15 2024 12:28:02 GMT+0530 (India Standard Time): 1ms
```
```js
import { Buffer } from "node:buffer";
import pg from 'pg'
const { Client } = pg
const client = new Client({
connectionString: 'postgresql://postgres:postgres@127.0.0.1:5432/postgres'
})
await client.connect()
async function fetch() {
const startPerf = performance.now();
const res = await client.query(`select
$1::int as int,
$2 as string,
$3::timestamp with time zone as timestamp,
$4 as null,
$5::bool as boolean,
$6::bytea as bytea,
$7::jsonb as json
`, [
1337,
'wat',
new Date().toISOString(),
null,
false,
Buffer.from('awesome'),
JSON.stringify([{ some: 'json' }, { array: 'object' }])
])
console.log(`${new Date()}: ${Math.round(performance.now() - startPerf)}ms`)
}
for(;;) await fetch();
```
Fixes #22995. Fixes #23000.
There were a handful of bugs here causing the hang (each with a
corresponding minimized test):
- We were canceling recv futures when `receiveMessageOnPort` was called,
but this caused the "receive loop" in the message port to exit. This was
due to the fact that `CancelHandle`s are never reset (i.e., once you
`cancel` a `CancelHandle`, it remains cancelled). That meant that after
`receieveMessageOnPort` was called, the subsequent calls to
`op_message_port_recv_message` would throw `Interrupted` exceptions, and
we would exit the loop.
The cancellation, however, isn't actually necessary.
`op_message_port_recv_message` only borrows the underlying port for long
enough to poll the receiver, so the borrow there could never overlap
with `op_message_port_recv_message_sync`.
- Calling `MessagePort.unref()` caused the "receive loop" in the message
port to exit. This was because we were setting
`messageEventListenerCount` to 0 on unref. Not only does that break the
counter when multiple `MessagePort`s are present in the same thread, but
we also exited the "receive loop" whenever the listener count was 0. I
assume this was to prevent the recv promise from keeping the event loop
open.
Instead of this, I chose to just unref the recv promise as needed to
control the event loop.
- The last bug causing the hang (which was a doozy to debug) ended up
being an unfortunate interaction between how we implement our
messageport "receive loop" and a pattern found in `npm:piscina` (which
angular uses). The gist of it is that piscina uses an atomic wait loop
along with `receiveMessageOnPort` in its worker threads, and as the
worker is getting started, the following incredibly convoluted series of
events occurs:
1. Parent sends a MessagePort `p` to worker
2. Parent sends a message `m` to the port `p`
3. Parent notifies the worker with `Atomics.notify` that a new message
is available
4. Worker receives message, adds "message" listener to port `p`
5. Adding the listener triggers `MessagePort.start()` on `p`
6. Receive loop in MessagePort.start receives the message `m`, but then
hits an await point and yields (before dispatching the "message" event)
7. Worker continues execution, starts the atomic wait loop, and
immediately receives the existing notification from the parent that a
message is available
8. Worker attempts to receive the new message `m` with
`receiveMessageOnPort`, but this returns `undefined` because the receive
loop already took the message in 6
9. Atomic wait loop continues to next iteration, waiting for the next
message with `Atomic.wait`
10. `Atomic.wait` blocks the worker thread, which prevents the receive
loop from continuing and dispatching the "message" event for the
received message
11. The parent waits for the worker to respond to the first message, and
waits
12. The thread can't make any more progress, and the whole process hangs
The fix I've chosen here (which I don't particularly love, but it works)
is to just delay the `MessagePort.start` call until the end of the event
loop turn, so that the atomic wait loop receives the message first. This
prevents the hang.
---
Those were the main issues causing the hang. There ended up being a few
other small bugs as well, namely `exit` being emitted multiple times,
and not patching up the message port when it's received by
`receiveMessageOnPort`.
Testing once again if the crates are being properly released.
---------
Co-authored-by: bartlomieju <bartlomieju@users.noreply.github.com>
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Test run before Deno 2.0 release to make sure that the publishing
process passes correctly.
---------
Co-authored-by: bartlomieju <bartlomieju@users.noreply.github.com>
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Add an implementation of cpu_info() for OpenBSD, that returns a
correctly-sized array. Since Rust's libc bindings for OpenBSD do not
contain all symbols necessary for a full implementation and it is not
planned to add them, this solution at least avoids problems with code
that relies on cpu_info() purely for the size of the returned array to
derive the number of available CPUs.
This addresses https://github.com/denoland/deno/issues/25621
Contributing toward #24236
- Swapped `Object.assign` for `ObjectAssign` primordial.
- Removed referencing TODO comment.
Please disregard if no longer desired.
Apparently `path/posix` and `path/win32` have circular exports. I do not
know why.
Additionally there's a deprecated function `_makeLong` which is just
`toNamespacedPath`
Closes #20613.
Reimplements the serialization on top of the v8 APIs instead of
deno_core. Implements `v8.Serializer`, `v8.DefaultSerializer`,
`v8.Deserializer`, and `v8.DefaultSerializer`.
implement require(esm) using `op_import_sync` from deno_core.
possible future changes:
- cts and mts
- replace Deno.core.evalContext to optimize esm syntax detection
Fixes: https://github.com/denoland/deno/issues/25487
