Remove `ExtensionFileSourceCode::LoadedFromFsDuringSnapshot` and feature
`include_js_for_snapshotting` since they leak paths that are only
applicable in this repo to embedders. Replace with feature
`exclude_js_sources`. Additionally the feature
`force_include_js_sources` allows negating it, if both features are set.
We need both of these because features are additive and there must be a
way of force including sources for snapshot creation while still having
the `exclude_js_sources` feature. `force_include_js_sources` is only set
for build deps, so sources are still excluded from the final binary.
You can also specify `force_include_js_sources` on any extension to
override the above features for that extension. Towards #19398.
But there was still the snapshot-from-snapshot situation where code
could be executed twice, I addressed that by making `mod_evaluate()` and
scripts like `core/01_core.js` behave idempotently. This allowed
unifying `ext::init_ops()` and `ext::init_ops_and_esm()` into
`ext::init()`.
This commit migrates "deno_core" from using "FuturesUnordered" to
"tokio::task::JoinSet". This makes every op to be a separate Tokio task
and should unlock better utilization of kqueue/epoll.
There were two quirks added to this PR:
- because of the fact that "JoinSet" immediately polls spawn tasks,
op sanitizers can give false positives in some cases, this was
alleviated by polling event loop once before running a test with
"deno test", which gives canceled ops an opportunity to settle
- "JsRuntimeState::waker" was moved to "OpState::waker" so that FFI
API can still use threadsafe functions - without this change the
registered wakers were wrong as they would not wake up the
whole "JsRuntime" but the task associated with an op
---------
Co-authored-by: Matt Mastracci <matthew@mastracci.com>
When someone explicitly opts into using the node_modules dir via
`--node-modules-dir` or setting `"nodeModulesDir": true` in the
deno.json file, we should eagerly ensure a top level package.json
install is done on startup. This was initially always done when we added
package.json support and a package.json was auto-discovered, but scaled
it back to be lazily done when a bare specifier matched an entry in the
package.json because of how disruptive it was for people using Deno
scripts in Node projects. That said, it does not make sense for someone
to opt-into having deno control and use their node_modules directory and
not want a package.json install to occur. If such a rare scenario
exists, the `DENO_NO_PACKAGE_JSON=1` environment variable can be set.
Ideally, we would only ever use a node_modules directory with this
explicit opt-in so everything is very clear, but we still have this
automatic scenario when there's a package.json in order to make more
node projects work out of the box.
We never properly added support for this. This fixes vendoring when it
has npm or node specifiers. Vendoring occurs by adding a
`"nodeModulesDir": true` property to deno.json then it uses a local
node_modules directory. This can be opted out by setting
`"nodeModulesDir": false` or running with `--node-modules-dir=false`.
Closes #18090
Closes #17210
Closes #17619
Closes #16778
Note: If the package information has already been cached, then this
requires running with `--reload` or for the registry information to be
fetched some other way (ex. the cache busting).
Closes #15544
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Partially supersedes #19016.
This migrates `spawn` and `spawn_blocking` to `deno_core`, and removes
the requirement for `spawn` tasks to be `Send` given our single-threaded
executor.
While we don't need to technically do anything w/`spawn_blocking`, this
allows us to have a single `JoinHandle` type that works for both cases,
and allows us to more easily experiment with alternative
`spawn_blocking` implementations that do not require tokio (ie: rayon).
Async ops (+~35%):
Before:
```
time 1310 ms rate 763358
time 1267 ms rate 789265
time 1259 ms rate 794281
time 1266 ms rate 789889
```
After:
```
time 956 ms rate 1046025
time 954 ms rate 1048218
time 924 ms rate 1082251
time 920 ms rate 1086956
```
HTTP serve (+~4.4%):
Before:
```
Running 10s test @ http://localhost:4500
2 threads and 10 connections
Thread Stats Avg Stdev Max +/- Stdev
Latency 68.78us 19.77us 1.43ms 86.84%
Req/Sec 68.78k 5.00k 73.84k 91.58%
1381833 requests in 10.10s, 167.36MB read
Requests/sec: 136823.29
Transfer/sec: 16.57MB
```
After:
```
Running 10s test @ http://localhost:4500
2 threads and 10 connections
Thread Stats Avg Stdev Max +/- Stdev
Latency 63.12us 17.43us 1.11ms 85.13%
Req/Sec 71.82k 3.71k 77.02k 79.21%
1443195 requests in 10.10s, 174.79MB read
Requests/sec: 142921.99
Transfer/sec: 17.31MB
```
Suggested-By: alice@ryhl.io
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This is the initial support for npm and node specifiers in `deno
compile`. The npm packages are included in the binary and read from it via
a virtual file system. This also supports the `--node-modules-dir` flag,
dependencies specified in a package.json, and npm binary commands (ex.
`deno compile --unstable npm:cowsay`)
Closes #16632
This removes `ProcState` and replaces it with a new `CliFactory` which
initializes our "service structs" on demand. This isn't a performance
improvement at the moment for `deno run`, but might unlock performance
improvements in the future.
Fixes regression from #18878 where `Promise.reject()`,
`Promise.reject(undefined)` and `reportError(undefined)` panic in the
REPL.
Fixes `throw undefined` printing `Uncaught Unknown exception` instead of
`Uncaught undefined`.
Fixes #8858.
Fixes #8869.
```
$ target/debug/deno
Deno 1.32.5
exit using ctrl+d, ctrl+c, or close()
REPL is running with all permissions allowed.
To specify permissions, run `deno repl` with allow flags.
> Promise.reject(new Error("bar"));
Promise { <rejected> Error: bar
at <anonymous>:2:16 }
Uncaught (in promise) Error: bar
at <anonymous>:2:16
> reportError(new Error("baz"));
undefined
Uncaught Error: baz
at <anonymous>:2:13
>
This is just a straight refactor and I didn't do any cleanup in
ext/node. After this PR we can start to clean it up and make things
private that don't need to be public anymore.
1. Adds cli/standalone folder
2. Writes the bytes directly to the output file. When adding npm
packages this might get quite large, so let's not keep the final output
in memory just in case.
1. Breaks up functionality within `ProcState` into several other structs
to break out the responsibilities (`ProcState` is only a data struct
now).
2. Moves towards being able to inject dependencies more easily and have
functionality only require what it needs.
3. Exposes `Arc<T>` around the "service structs" instead of it being
embedded within them. The idea behind embedding them was to reduce the
verbosity of needing to pass around `Arc<...>`, but I don't think it was
exactly working and as we move more of these structs to be more
injectable I don't think the extra verbosity will be a big deal.
Removes the functions in the `emit` module and replaces them with an
`Emitter` struct that can have "ctor dependencies" injected rather than
using functions to pass along the dependencies.
This is part of a long term refactor to move more functionality out of
proc state.
Stores the test/bench functions in rust op state during registration.
The functions are wrapped in JS first so that they return a directly
convertible `TestResult`/`BenchResult`. Test steps are still mostly
handled in JS since they are pretty much invoked by the user. Allows
removing a bunch of infrastructure for communicating between JS and
rust. Allows using rust utilities for things like shuffling tests
(`Vec::shuffle`). We can progressively move op and resource sanitization
to rust as well.
Fixes #17122.
Fixes #17312.
- bump deps: the newest `lazy-regex` need newer `oncecell` and
`regex`
- reduce `unwrap`
- remove dep `lazy_static`
- make more regex cached
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
