1. Stops `deno publish` using some custom include/exclude behaviour from
other sub commands
2. Takes ancestor directories into account when resolving gitignore
3. Backards compatible change that adds ability to unexclude an exclude
by using a negated glob at a more specific level for all sub commands
(see https://github.com/denoland/deno_config/pull/44).
An undocumented "DENO_DISABLE_PEDANTIC_NODE_WARNINGS" env
var can be used to silence warnings for sloppy imports and node builtins
without `node:` prefix.
Fixes https://github.com/denoland/deno/issues/18127https://github.com/denoland/deno/issues/17248
SvelteKit works now!
```
$ deno run -A npm:create-svelte@latest my-app
create-svelte version 6.0.9
┌ Welcome to SvelteKit!
│
◇ Which Svelte app template?
│ SvelteKit demo app
│
◇ Add type checking with TypeScript?
│ Yes, using JavaScript with JSDoc comments
│
◇ Select additional options (use arrow keys/space bar)
│ none
│
└ Your project is ready!
✔ Type-checked JavaScript
https://www.typescriptlang.org/tsconfig#checkJs
Install community-maintained integrations:
https://github.com/svelte-add/svelte-add
Next steps:
1: cd my-app
2: npm install
3: git init && git add -A && git commit -m "Initial commit" (optional)
4: npm run dev -- --open
To close the dev server, hit Ctrl-C
Stuck? Visit us at https://svelte.dev/chat
$ cd my-app/
$ deno task dev
Task dev vite dev
VITE v5.1.4 ready in 1632 ms
➜ Local: http://localhost:5173/
➜ Network: use --host to expose
➜ press h + enter to show help
```
The diagnostic was incorrect when importing a `.js` file with a
corresponding `.d.ts` file with sloppy imports because it would say to
change the `.js` extension to `.d.ts`, which is incorrect. We might as
well just hide this diagnostic.
Improves #19100
Fixes #20356
Replaces #20428
Changes made in deno_core to support this:
- [x] Errors must be handled in setTimeout callbacks
- [x] Microtask ordering is not-quite-right
- [x] Timer cancellation must be checked right before dispatch
- [x] Timer sanitizer
- [x] Move high-res timer to deno_core
- [x] Timers need opcall tracing
fixes #22627
This PR fixes a node compat issue that is preventing `serverless-http`
and `serverless-express` npm modules from working with Deno. These
modules are useful for running apps on AWS Lambda (and other serverless
infra).
---------
Signed-off-by: Igor Zinkovsky <igor@deno.com>
This commit adds "deno add" subcommand that has a basic support for
adding "jsr:" packages to "deno.json" file.
This currently doesn't support "npm:" specifiers and specifying version
constraints.
Some `deno_std` tests were failing to print output that was resolved
after the last test finished. In addition, output printed before tests
began would sometimes appear above the "running X tests ..." line, and
sometimes below it depending on timing.
We now guarantee that all output is flushed before and after tests run,
making the output consistent.
Pre-test and post-test output are captured in `------ pre-test output
------` and `------ post-test output ------` blocks to differentiate
them from the regular output blocks.
Here's an example of a test (that is much noisier than normal, but an
example of what the output will look like):
```
Check ./load_unload.ts
------- pre-test output -------
load
----- output end -----
running 1 test from ./load_unload.ts
test ...
------- output -------
test
----- output end -----
test ... ok ([WILDCARD])
------- post-test output -------
unload
----- output end -----
```
A security feature of JSR is that it is self contained other than npm
dependencies. At publish time, the registry rejects packages that write
code like this:
```ts
const data = await import("https://example.com/evil.js");
```
However, this can be trivially bypassed by writing code that the
registry cannot statically analyze for. This PR prevents Deno from
loading dynamic imports that do this.
As we add tracing to more types of runtime activity, `--trace-ops` is
less useful of a name. `--trace-leaks` better reflects that this feature
traces both ops and timers, and will eventually trace resource opening
as well.
This keeps `--trace-ops` as an alias for `--trace-leaks`, but prints a
warning to the console suggesting migration to `--trace-leaks`.
One test continues to use `--trace-ops` to test the deprecation warning.
---------
Signed-off-by: Matt Mastracci <matthew@mastracci.com>
- Removes the origin call, since all origins are the same for an isolate
(ie: the main module)
- Collects the `TestDescription`s and sends them all at the same time
inside of an Arc, allowing us to (later on) re-use these instead of
cloning.
Needs a follow-up pass to remove all the cloning, but that's a thread
that is pretty long to pull
---------
Signed-off-by: Matt Mastracci <matthew@mastracci.com>
Supply chain security for JSR.
```
$ deno publish --provenance
Successfully published @divy/test_provenance@0.0.3
Provenance transparency log available at https://search.sigstore.dev/?logIndex=73657418
```
0. Package has been published.
1. Fetches the version manifest and verifies it's matching with uploaded
files and exports.
2. Builds the attestation SLSA payload using Github actions env.
3. Creates an ephemeral key pair for signing the github token
(aud=sigstore) and DSSE pre authentication tag.
4. Requests a X.509 signing certificate from Fulcio using the challenge
and ephemeral public key PEM.
5. Prepares a DSSE envelop for Rekor to witness. Posts an intoto entry
to Rekor and gets back the transparency log index.
6. Builds the provenance bundle and posts it to JSR.
<!--
Before submitting a PR, please read
https://docs.deno.com/runtime/manual/references/contributing
1. Give the PR a descriptive title.
Examples of good title:
- fix(std/http): Fix race condition in server
- docs(console): Update docstrings
- feat(doc): Handle nested reexports
Examples of bad title:
- fix #7123
- update docs
- fix bugs
2. Ensure there is a related issue and it is referenced in the PR text.
3. Ensure there are tests that cover the changes.
4. Ensure `cargo test` passes.
5. Ensure `./tools/format.js` passes without changing files.
6. Ensure `./tools/lint.js` passes.
7. Open as a draft PR if your work is still in progress. The CI won't
run
all steps, but you can add '[ci]' to a commit message to force it to.
8. If you would like to run the benchmarks on the CI, add the 'ci-bench'
label.
-->
This PR enhances the `deno publish` command to infer dependencies from
`package.json` if present.
When using a prefix or suffix containing an invalid filename character,
it's not entirely clear where the errors come from. We make these errors
more consistent across platforms.
In addition, all permission prompts for tempfile and tempdir were
printing the same API name.
We also take the opportunity to make the tempfile random space larger by
2x (using a base32-encoded u64 rather than a hex-encoded u32).
1. Renames zap/fast-check to instead be a `no-slow-types` lint rule.
1. This lint rule is automatically run when doing `deno lint` for
packages (deno.json files with a name, version, and exports field)
1. This lint rules still occurs on publish. It can be skipped by running
with `--no-slow-types`
If we strip out unprintable chars, we don't see the full filename being
requested by permission prompts. Instead, we highlight and escape them
to make them visible.
This change deprecates
`Deno.CreateHttpClientOptions.{certChain,privateKey}` in favour of
`Deno.CreateHttpClientOptions.{cert,key}`.
Closes #22278
Co-authored-by: Matt Mastracci <matthew@mastracci.com>
The format of the sanitizers will change a little bit:
- If multiple async ops leak and traces are on, we repeat the async op
header once per stack trace.
- All leaks are aggregated under a "Leaks detected:" banner as the new
timers are eventually going to be added, and these are neither ops nor
resources.
- `1 async op` is now `An async op`
- If ops and resources leak, we show both (rather than op leaks masking
resources)
Follow-on to https://github.com/denoland/deno/pull/22226
This changes the lockfile to not store JSR specifiers in the "remote"
section. Instead a single JSR integrity is stored per package in the
lockfile, which is a hash of the version's `x.x.x_meta.json` file, which
contains hashes for every file in the package. The hashes in this file
are then compared against when loading.
Additionally, when using `{ "vendor": true }` in a deno.json, the files
can be modified without causing lockfile errors—the checksum is only
checked when copying into the vendor folder and not afterwards
(eventually we should add this behaviour for non-jsr specifiers as
well). As part of this change, the `vendor` folder creation is not
always automatic in the LSP and running an explicit cache command is
necessary. The code required to track checksums in the LSP would have
been too complex for this PR, so that all goes through deno_graph now.
The vendoring is still automatic when running from the CLI.
Based on #21074 and #20741 I was looking for further potential use cases
of `TransformStream` `cancel()` method, so here go `CompressionStream`
and `DecompressionStream`.
Fixes #14212
Note: tests are not the only part of the codebase that uses `std`. Other
parts, like `tools/`, do too. So, it could be argued that this is a
little misleading. Either way, I'm doing this as discussed with
@mmastrac.
This implementation heavily depends on there being a lockfile, meaning
JSR specifiers will always diagnose as uncached unless it's there. In
practice this affects cases where a `deno.json` isn't being used. Our
NPM specifier support isn't subject to this.
The reason for this is that the version constraint solving code is
currently buried in `deno_graph` and not usable from the LSP, so the
only way to reuse that logic is the solved-version map in the lockfile's
`packages.specifiers`.
This looks like a massive PR, but it's only a move from cli/tests ->
tests, and updates of relative paths for files.
This is the first step towards aggregate all of the integration test
files under tests/, which will lead to a set of integration tests that
can run without the CLI binary being built.
While we could leave these tests under `cli`, it would require us to
keep a more complex directory structure for the various test runners. In
addition, we have a lot of complexity to ignore various test files in
the `cli` project itself (cargo publish exclusion rules, autotests =
false, etc).
And finally, the `tests/` folder will eventually house the `test_ffi`,
`test_napi` and other testing code, reducing the size of the root repo
directory.
For easier review, the extremely large and noisy "move" is in the first
commit (with no changes -- just a move), while the remainder of the
changes to actual files is in the second commit.
This ensures the deno executable is properly created before running the integration tests.
Also allows deno_cli to be used as a lib. Docs are now properly generated: https://docs.rs/deno_cli/0.18.4/deno_cli/
Towards #2933
Prep for #2955
Instead of using core/snapshot_creator.rs, instead two crates are
introduced which allow building the snapshot during build.rs.
Rollup is removed and replaced with our own bundler. This removes
the Node build dependency. Modules in //js now use Deno-style imports
with file extensions, rather than Node style extensionless imports.
This improves incremental build time when changes are made to //js files
by about 40 seconds.
This removes dispatch_flatbuffers as it is now unused. There are still a
few places where msg_generated is used: ErrorKind and MediaType. These
will be dealt with later.
* Revert "port more ops to JSON (#2809)"
This reverts commit 137f33733d.
* Revert "port ops to JSON: compiler, errors, fetch, files (#2804)"
This reverts commit 79f82cf10e.
* Revert "Port rest of os ops to JSON (#2802)"
This reverts commit 5b2baa5c99.
* remove fetch_source_file_and_maybe_compile_async and
replace it with State.fetch_compiled_module
* remove SourceFile.js_source()
* introduce CompiledModule which is basically the same as
deno::SourceInfo and represents arbitrary file that has been
compiled to JS module
* introduce //cli/compilers module containing all compilers
* introduce JsCompiler which is a no-op compiler
- output is the same as input, no compilation takes place
- it is used for MediaType::JavaScript and MediaType::Unknown
* introduce JsonCompiler that wraps JSON in default export
* support JS-to-JS compilation using checkJs
* rename `ModuleMetaData` to `SourceFile` and remove TS specific
functionality
* add `TsCompiler` struct encapsulating processing of TypeScript files
* move `SourceMapGetter` trait implementation to `//cli/compiler.rs`
* add low-level `DiskCache` API for general purpose caches and use it in
`DenoDir` and `TsCompiler` for filesystem access
* don't use hash-like filenames for compiled modules, instead use
metadata file for storing compilation hash
* add `SourceFileCache` for in-process caching of loaded files for fast
subsequent access
* define `SourceFileFetcher` trait encapsulating loading of local and
remote files and implement it for `DenoDir`
* define `use_cache` and `no_fetch` flags on `DenoDir` instead of using
in fetch methods
The rules are now as follows:
* In `import` statements, as mandated by the WHATWG specification,
the import specifier is always treated as a URL.
If it is a relative URL, it must start with either / or ./ or ../
* A script name passed to deno as a command line argument may be either
an absolute URL or a local path.
- If the name starts with a valid URI scheme followed by a colon, e.g.
'http:', 'https:', 'file:', 'foo+bar:', it always interpreted as a
URL (even if Deno doesn't support the indicated protocol).
- Otherwise, the script name is interpreted as a local path. The local
path may be relative, and operating system semantics determine how
it is resolved. Prefixing a relative path with ./ is not required.
* Compiler no longer has its own Tokio runtime. Compiler handles one
message and then exits.
* Uses the simpler ts.CompilerHost interface instead of
ts.LanguageServiceHost.
* avoids recompiling the same module by introducing a hacky but simple
`hashset<string>` that stores the module names that have been already
compiled.
* Removes the CompilerConfig op.
* Removes a lot of the mocking stuff in compiler.ts like `this._ts`. It
is not useful as we don't even have tests.
* Turns off checkJs because it causes fmt_test to die with OOM.
Removed `extmap` and added .mjs entry in `map_file_extension`.
The assert in the compiler does not need to be updated, since it is
resolving from the compiled cache instead of elsewhere (notice the .map
is asserted next to it)
This disables a few tests which are broken still:
- tests/error_004_missing_module.test
- tests/error_005_missing_dynamic_import.test
- tests/error_006_import_ext_failure.test
- repl_test test_set_timeout
- repl_test test_async_op
- repl_test test_set_timeout_interlaced
- all of permission_prompt_test
A major API change was that asserts are imported from testing/asserts.ts
now rather than testing/mod.ts and assertEqual as renamed to
assertEquals to conform to what is most common in JavaScript.
Resolves #1705
This PR adds the Deno APIs as a global namespace named `Deno`. For backwards
compatibility, the ability to `import * from "deno"` is preserved. I have tried
to convert every test and internal code the references the module to use the
namespace instead, but because I didn't break compatibility I am not sure.
On the REPL, `deno` no longer exists, replaced only with `Deno` to align with
the regular runtime.
The runtime type library includes both the namespace and module. This means it
duplicates the whole type information. When we remove the functionality from the
runtime, it will be a one line change to the library generator to remove the
module definition from the type library.
I marked a `TODO` in a couple places where to remove the `"deno"` module, but
there are additional places I know I didn't mark.
