This commit changes the type parameter for "deno_node" extension, from
`P: NodePermission` to `Env: NodeEnv`.
`NodeEnv` is a new trait that has associated type `P: NodePermission`.
This is a stepping stone to support swappable file system for the
extension, that will be added as a second associated type to the
`NodeEnv` trait.
1. Rewrites the tests to be more back and forth rather than getting the
output all at once (which I believe was causing the hangs on linux and
maybe mac)
2. Runs the pty tests on the linux ci.
3. Fixes a bunch of tests that were just wrong.
4. Adds timeouts on the pty tests.
Fast-follow on #18401 -- the reason that some tests were panicking in
the `CacheDB` `impl Drop` was that the cache itself was being dropped
during panic and the runtime may or may not still exist at that point.
We can reduce the actual tokio runtime testing to where it's needed.
In addition, we return the journal mode to `TRUNCATE` to avoid the risk
of data corruption.
Towards #18455
This commit implements `checkPrimeSync` and `checkPrime` in node:crypto
using the Miller-Rabin primality test (fun fact: it actually is a test
for composite numbers)
It first compares the candidate against many known small primes and if
not, proceeds to run the Miller-Rabin primality test.
http://nickle.org/examples/miller-rabin.5c used as reference
implementation.
This gets SQLite off the flamegraph and reduces initialization time by
somewhere between 0.2ms and 0.5ms. In addition, I took the opportunity
to move all the cache management code to a single place and reduce
duplication. While the PR has a net gain of lines, much of that is just
being a bit more deliberate with how we're recovering from errors.
The existing caches had various policies for dealing with cache
corruption, so I've unified them and tried to isolate the decisions we
make for recovery in a single place (see `open_connection` in
`CacheDB`). The policy I chose was:
1. Retry twice to open on-disk caches
2. If that fails, try to delete the file and recreate it on-disk
3. If we fail to delete the file or re-create a new cache, use a
fallback strategy that can be chosen per-cache: InMemory (temporary
cache for the process run), BlackHole (ignore writes, return empty
reads), or Error (fail on every operation).
The caches all use the same general code now, and share the cache
failure recovery policy.
In addition, it cleans up a TODO in the `NodeAnalysisCache`.
This internal node hook is used by libraries such as `ts-node` when used
as a require hook `node -r ts-node/register`. That combination is often
used with test frameworks like `mocha` or `jasmine`.
We had a reference to `Module._preloadModules` in our code, but the
implementation was missing. While fixing this I also noticed that the
`fakeParent` module that we create internally always threw because of
the `pathDirname` check on the module id in the constructor of `Mdoule`.
So this code path was probably broken for a while.
```txt
✖ ERROR: Error: Empty filepath.
at pathDirname (ext:deno_node/01_require.js:245:11)
at new Module (ext:deno_node/01_require.js:446:15)
at Function.Module._resolveFilename (ext:deno_node/01_require.js:754:28)
at Function.resolve (ext:deno_node/01_require.js:1015:19)
```
This commit adds the `crypto.createSecretKey` API.
Key management: This follows the same approach as our WebCrypto
CryptoKey impl where we use WeakMap for storing key material and a
handle is passed around, such that (only internal) JS can access the key
material and we don't have to explicitly close a Rust resource.
As a result, `createHmac` now accepts a secret KeyObject.
Closes https://github.com/denoland/deno/issues/17844
This will improve diagnostics and catch any non-ASCII extension code
early.
This will use `debug_assert!` rather than `assert!` to avoid runtime
costs, and ensures (in debug_assert mode only) that all extension source
files are ASCII as we load them.
This will make it a bit harder to accidentally use a client url in the
wrong place. I don't fully understand why we do this mapping, but this
will help prevent bugs like #18373
Closes #18374
No need for two almost identical implementations of the same thing
---------
Co-authored-by: Yoshiya Hinosawa <stibium121@gmail.com>
Co-authored-by: Aapo Alasuutari <aapo.alasuutari@gmail.com>
Previously the mapping between `AnyValue::Bool` and `KeyPart::Bool` was
inverted.
This patch also allows using the empty key `[]` as range start/end to
`snapshot_read`.
Currently `Deno.openKv(":memory:")` requests read+write permissions for
`./:memory:` even though no file is read or written. Also added some
guards for special sqlite paths that were unintentionally opted into.
This commit adds unstable "Deno.openKv()" API that allows to open
a key-value database at a specified path.
---------
Co-authored-by: Luca Casonato <hello@lcas.dev>
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
…'t automatically re-created (#18330)"
This reverts commit 2ef8269fdb.
Printing these messages by default (instead of requiring `-L debug`
flag) caused
various tests to start printing it and mismatch in output assertions.
Reduce the number of copies and allocations of script code by carrying
around ownership/reference information from creation time.
As an advantage, this allows us to maintain the identity of `&'static
str`-based scripts and use v8's external 1-byte strings (to avoid
incorrectly passing non-ASCII strings, debug `assert!`s gate all string
reference paths).
Benchmark results:
Perf improvements -- ~0.1 - 0.2ms faster, but should reduce garbage
w/external strings and reduces data copies overall. May also unlock some
more interesting optimizations in the future.
This requires adding some generics to functions, but manual
monomorphization has been applied (outer/inner function) to avoid code
bloat.
This commit disables compression of the TSC snapshot.
The compression only decreased the size of snapshot by 0.5Mb
and it took about 40s during release build to compress.
With recent gains in TS 5.0 upgrade in terms of size and performance
it makes sense to remove this compression.
This PR changes the inspect result of anonymous functions from
`[Function]` to `[Function (anonymous)]`. This behavior is aligned
to `util.inspect` of Node.js.
Moving some code around in `ext/node` is it's a bit better well defined
and makes it possible for others to embed it.
I expect to see no difference in startup perf with this change.
These functions don't need to be async, as they are only calling
synchronous JavaScript code. As a follow up, all 3 functions
should be merge together - this will reduce roundtrips for
calling V8 from Rust, which is somewhat expensive
This commit adds support for spawning Web Workers in self-contained
binaries created with "deno compile" subcommand.
As long as module requested in "new Worker" constructor is part of the
eszip (by means of statically importing it beforehand, or using "--include"
flag), then the worker can be spawned.
This change will enable dynamic imports and web workers to use modules
not reachable from the main module, by passing a list of extra side
module roots as options to `deno compile`.
This can be done by specifying "--include" flag that accepts a file path or a
URL. This flag can be specified multiple times, to include several modules.
The modules specified with "--include" flag, will be added to the produced
"eszip".
This commit changes the build process in a way that preserves already
registered ops in the snapshot. This allows us to skip creating hundreds of
"v8::String" on each startup, but sadly there is still some op registration
going on startup (however we're registering 49 ops instead of >200 ops).
This situation could be further improved, by moving some of the ops
from "runtime/" to a separate extension crates.
---------
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
Follow-up to #18210:
* we are passing the generated `cfg` object into the state function
rather than passing individual config fields
* reduce cloning dramatically by making the state_fn `FnOnce`
* `take` for `ExtensionBuilder` to avoid more unnecessary copies
* renamed `config` to `options`
This implements two macros to simplify extension registration and centralize a lot of the boilerplate as a base for future improvements:
* `deno_core::ops!` registers a block of `#[op]`s, optionally with type
parameters, useful for places where we share lists of ops
* `deno_core::extension!` is used to register an extension, and creates
two methods that can be used at runtime/snapshot generation time:
`init_ops` and `init_ops_and_esm`.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This commit removes compression for the runtime JS code.
It means that we will have a bigger binary, but faster startup. After
several discussion in the CLI team we decided it's worth to trade
about 3Mb of binary size for 2ms faster startup time. With WebGPU
removed in 35196eab27
it shouldn't have such a big impact on the binary size.
This PR _**temporarily**_ removes WebGPU (which has behind the
`--unstable` flag in Deno), due to performance complications due to its
presence.
It will be brought back in the future; as a point of reference, Chrome
will ship WebGPU to stable on 26/04/2023.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Closes #17831. This change hides the indices of any indexed collection
when triggering tab completion for object properties in the REPL.
An example is shown in the issue, but for verbosity here is another.
Before the change:
```
> const arr = new Uint8ClampedArray([1, 2, 3])
undefined
> arr.
0 map
1 reverse
2 reduce
...
```
After the change:
```
> const arr = new Uint8ClampedArray([1, 2, 3])
undefined
> arr.
constructor reduce
BYTES_PER_ELEMENT reduceRight
buffer set
...
```
Co-authored-by: David Sherret <dsherret@users.noreply.github.com>
To be able to preserve "Deno.core.ops" we need to ensure that
ops are registered in the same order in various places, otherwise
we will get mismatch in external references ordering.
Prerequisite for https://github.com/denoland/deno/pull/18080
This commit adds support for retrieving `dev` information
when stating files on Windows.
Additionally `Deno.FileInfo` interfaces was changed to always
return 0 for fields that we don't retrieve information for on Windows.
Closes https://github.com/denoland/deno/issues/18053
---------
Co-authored-by: David Sherret <dsherret@gmail.com>
These methods are confusing because the arguments are backwards. I feel
like they should have never been added to `Option<T>` and that clippy
should suggest rewriting to
`map(...).unwrap_or(...)`/`map(...).unwrap_or_else(|| ...)`
https://github.com/rust-lang/rfcs/issues/1025
Chrono's `clock` feature pulls in `iana-time-zone` which links to macOS
core_foundation. This PR itself is not enough to get rid of
CoreFoundation. Removal depends on getting rid of security framework,
see #18071
This commit changes "deno_core" to not rely on implicitly calling
"std::env::current_dir()" when resolving module specifiers using
APIs from "deno_core::modules_specifier".
Supersedes https://github.com/denoland/deno/pull/15454
Remove remaining usages of "resolve_url_or_path_deprecated" in favor
of "resolve_url_or_path" with explicit calls to
"std::env::current_dir()".
Towards landing https://github.com/denoland/deno/pull/15454
This commit changes various CLI subcommands that have support for
the "--watch" flag to use initial current working directory when
resolving "main module".
This is part of migration towards explicitly passing current working
directory to "deno_core::resolve_url_or_path" API.
As a side effect this makes "deno <subcommand> --watch" more aligned to
user expectations, where calling "Deno.chdir()" during program doesn't
break watcher.
Towards landing https://github.com/denoland/deno/pull/15454
This commit changes current "deno_core::resolve_url_or_path" API to
"resolve_url_or_path_deprecated" and adds new "resolve_url_or_path"
API that requires to explicitly pass the directory from which paths
should be resolved to.
Some of the call sites were updated to use the new API, the reminder
of them will be updated in a follow up PR.
Towards landing https://github.com/denoland/deno/pull/15454
Creating the node_modules folder when the packages are already
downloaded can take a bit of time and not knowing what is going on can
be confusing. It's better to show a progress bar.
This has been bothering me for a while and it became more painful while
working on #18136 because injecting the shared progress bar became very
verbose. Basically we should move the creation of all these npm structs
up to a higher level.
This is a stepping stone for a future refactor where we can improve how
we create all our structs.
This commit removes "deno_core::RuntimeOptions::extensions_with_js".
Now it's embedders' responsibility to properly register extensions
that will not contains JavaScript sources when running from an existing
snapshot.
Prerequisite for https://github.com/denoland/deno/pull/18080
This commit partially reverts changes from
https://github.com/denoland/deno/pull/18095.
Turns out I made a mistake that became apparent when working
on removing "RuntimeOptions::extensions_with_js" in a follow up.
This commit splits "<ext_name>::init" functions into "init_ops" and
"init_ops_and_esm". That way we don't have to construct list of
ESM sources on each startup if we're running with a snapshot.
In a follow up commit "deno_core" will be changed to not have a split
between "extensions" and "extensions_with_js" - it will be embedders'
responsibility to pass appropriately configured extensions.
Prerequisite for https://github.com/denoland/deno/pull/18080
This improves peer dependency resolution yet again. We did not handle
scenarios like the following:
```
// a -> b -> c -> d -> c -> b (peer)
```
...which would maybe work ok the first time its run in some cases, but
then lead to a lockfile that would error on load.
This now keeps track of circular dependencies and updates nodes
accordingly. That said, there is still a lurking bug in this code
somewhere that I've added a comment for (there is a mitigation on the
tail end that seems to work well). The current state is much better than
before and I can look into it later. I think it's something small that's
incorrect.
```
Benchmark 1: deno run -A ../empty.js
Time (mean ± σ): 20.5 ms ± 0.5 ms [User: 13.4 ms, System: 5.1 ms]
Range (min … max): 19.8 ms … 24.0 ms 119 runs
Benchmark 2: target/release/deno run -A ../empty.js
Time (mean ± σ): 18.8 ms ± 0.3 ms [User: 13.0 ms, System: 4.9 ms]
Range (min … max): 18.3 ms … 19.9 ms 129 runs
```
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
