Fix #25481
The `InitWorkPathAndCommonConfig` calls `LoadCommonSettings` which does
many checks like "current user is root or not".
Some commands like "environment-to-ini" shouldn't do such check, because
it might be run with "root" user at the moment (eg: the docker's setup
script)
ps: in the future, the docker's setup script should be improved to avoid
Gitea's command running with "root"
The recent change on xorm for `Sync` is it will not warn when database
have columns which is not listed on struct. So we just need this warn
logs when `Sync` the whole database but not in the migrations Sync.
This PR will remove almost unnecessary warning logs on migrations.
Now below logs in CI will disappear.
```log
2023/06/23 17:51:32 models/db/engine.go:191:InitEngineWithMigration() [W] Table gtestschema.project has column creator_id but struct has not related field
2023/06/23 17:51:32 models/db/engine.go:191:InitEngineWithMigration() [W] Table gtestschema.project has column is_closed but struct has not related field
2023/06/23 17:51:32 models/db/engine.go:191:InitEngineWithMigration() [W] Table gtestschema.project has column board_type but struct has not related field
2023/06/23 17:51:32 models/db/engine.go:191:InitEngineWithMigration() [W] Table gtestschema.project has column type but struct has not related field
2023/06/23 17:51:32 models/db/engine.go:191:InitEngineWithMigration() [W] Table gtestschema.project has column closed_date_unix but struct has not related field
2023/06/23 17:51:32 models/db/engine.go:191:InitEngineWithMigration() [W] Table gtestschema.project has column created_unix but struct has not related field
2023/06/23 17:51:32 models/db/engine.go:191:InitEngineWithMigration() [W] Table gtestschema.project has column updated_unix but struct has not related field
2023/06/23 17:51:32 models/db/engine.go:191:InitEngineWithMigration() [W] Table gtestschema.project has column card_type but struct has not related field
```
Try to prevent what happened with tag `v1.21.0-dev` as outlined in
#25193.
Unfortunately, we cannot really test if it works as intended as we would
need to release a new `dev` tag for that.
Fixes #25193 (or at least attempts to).
---------
Co-authored-by: jolheiser <john.olheiser@gmail.com>
Close #20976
Close #20975
1. Fix the bug: the TOC in footer was incorrectly rendered as main
content's TOC
2. Fix the layout: on mobile, the TOC is put above the main content,
while the sidebar is put below the main content
3. Auto collapse the TOC on mobile
ps: many styles of "wiki.css" are moved from old css files, so leave
nits to following PRs.
Fix regression of #25174.
The `Init` of the db indexer should return true to indicate that the
index was opened/existed, or the indexer will try to populate the index
(not really populate, just fill the queue, `Index` method of the db
indexer is a dummy).
Refactor `modules/indexer` to make it more maintainable. And it can be
easier to support more features. I'm trying to solve some of issue
searching, this is a precursor to making functional changes.
Current supported engines and the index versions:
| engines | issues | code |
| - | - | - |
| db | Just a wrapper for database queries, doesn't need version | - |
| bleve | The version of index is **2** | The version of index is **6**
|
| elasticsearch | The old index has no version, will be treated as
version **0** in this PR | The version of index is **1** |
| meilisearch | The old index has no version, will be treated as version
**0** in this PR | - |
## Changes
### Split
Splited it into mutiple packages
```text
indexer
├── internal
│ ├── bleve
│ ├── db
│ ├── elasticsearch
│ └── meilisearch
├── code
│ ├── bleve
│ ├── elasticsearch
│ └── internal
└── issues
├── bleve
├── db
├── elasticsearch
├── internal
└── meilisearch
```
- `indexer/interanal`: Internal shared package for indexer.
- `indexer/interanal/[engine]`: Internal shared package for each engine
(bleve/db/elasticsearch/meilisearch).
- `indexer/code`: Implementations for code indexer.
- `indexer/code/internal`: Internal shared package for code indexer.
- `indexer/code/[engine]`: Implementation via each engine for code
indexer.
- `indexer/issues`: Implementations for issues indexer.
### Deduplication
- Combine `Init/Ping/Close` for code indexer and issues indexer.
- ~Combine `issues.indexerHolder` and `code.wrappedIndexer` to
`internal.IndexHolder`.~ Remove it, use dummy indexer instead when the
indexer is not ready.
- Duplicate two copies of creating ES clients.
- Duplicate two copies of `indexerID()`.
### Enhancement
- [x] Support index version for elasticsearch issues indexer, the old
index without version will be treated as version 0.
- [x] Fix spell of `elastic_search/ElasticSearch`, it should be
`Elasticsearch`.
- [x] Improve versioning of ES index. We don't need `Aliases`:
- Gitea does't need aliases for "Zero Downtime" because it never delete
old indexes.
- The old code of issues indexer uses the orignal name to create issue
index, so it's tricky to convert it to an alias.
- [x] Support index version for meilisearch issues indexer, the old
index without version will be treated as version 0.
- [x] Do "ping" only when `Ping` has been called, don't ping
periodically and cache the status.
- [x] Support the context parameter whenever possible.
- [x] Fix outdated example config.
- [x] Give up the requeue logic of issues indexer: When indexing fails,
call Ping to check if it was caused by the engine being unavailable, and
only requeue the task if the engine is unavailable.
- It is fragile and tricky, could cause data losing (It did happen when
I was doing some tests for this PR). And it works for ES only.
- Just always requeue the failed task, if it caused by bad data, it's a
bug of Gitea which should be fixed.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
this will allow us to fully localize it later
PS: we can not migrate back as the old value was a one-way conversion
prepare for #25213
---
*Sponsored by Kithara Software GmbH*
Fix #25438
All non-"ok" buttons which do not have "type" should not submit the
form, should not be triggered by "Enter".
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
As title, this is how it was inferred before
e24f651c86/Makefile (L83-L84)
We moved to actions, however `GITEA_VERSION` should still work to use
`VERSION`
Signed-off-by: jolheiser <john.olheiser@gmail.com>
- Set
[type=search](https://developer.mozilla.org/en-US/docs/Web/HTML/Element/input/search)
- Disable spellcheck
- Set maxLength 255 that I found in `templates/repo/issue/search.tmpl`
- Remove unnecessary `max-width`, it does nothing
---------
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: Giteabot <teabot@gitea.io>
- Improve "Hide the activity from the profile page" label
- E-Mail privacy icon in user profile now redirects to Privacy section
- E-Mail privacy settings moved to Privacy section
Previously, the user was redirected to the setting itself, however,
that is not a good design choice because the setting itself would
be at the very top of the user's browser window. This fix doesn't
fix the problem entirely, but it is definitely an improvement
compared to its previous iteration.
Numerous small UI fixes:
- Fix double border in collaborator list
- Fix system notice table background
- Mute links in repo and org lists
- Downsize projects edit buttons
- Improve milestones and project list rendering
- Condense milestone list entry to a single line of "metas"
- Mute ".." button in repo files list
In modern days, there is no reason to make users set "charset" anymore.
Close #25378
## ⚠️ BREAKING
The key `[database].CHARSET` was removed completely as every newer
(>10years) MySQL database supports `utf8mb4` already.
There is a (deliberately) undocumented new fallback option if anyone
still needs to use it, but we don't recommend using it as it simply
causes problems.
# The problem
There were many "path tricks":
* By default, Gitea uses its program directory as its work path
* Gitea tries to use the "work path" to guess its "custom path" and
"custom conf (app.ini)"
* Users might want to use other directories as work path
* The non-default work path should be passed to Gitea by GITEA_WORK_DIR
or "--work-path"
* But some Gitea processes are started without these values
* The "serv" process started by OpenSSH server
* The CLI sub-commands started by site admin
* The paths are guessed by SetCustomPathAndConf again and again
* The default values of "work path / custom path / custom conf" can be
changed when compiling
# The solution
* Use `InitWorkPathAndCommonConfig` to handle these path tricks, and use
test code to cover its behaviors.
* When Gitea's web server runs, write the WORK_PATH to "app.ini", this
value must be the most correct one, because if this value is not right,
users would find that the web UI doesn't work and then they should be
able to fix it.
* Then all other sub-commands can use the WORK_PATH in app.ini to
initialize their paths.
* By the way, when Gitea starts for git protocol, it shouldn't output
any log, otherwise the git protocol gets broken and client blocks
forever.
The "work path" priority is: WORK_PATH in app.ini > cmd arg --work-path
> env var GITEA_WORK_DIR > builtin default
The "app.ini" searching order is: cmd arg --config > cmd arg "work path
/ custom path" > env var "work path / custom path" > builtin default
## ⚠️ BREAKING
If your instance's "work path / custom path / custom conf" doesn't meet
the requirements (eg: work path must be absolute), Gitea will report a
fatal error and exit. You need to set these values according to the
error log.
----
Close #24818
Close #24222
Close #21606
Close #21498
Close #25107
Close #24981
Maybe close #24503
Replace #23301
Replace #22754
And maybe more
That's a longstanding INI package problem: the "MustXxx" calls change
the option values, and the following "Save" will save a lot of garbage
options into the user's config file.
Ideally we should refactor the INI package to a clear solution, but it's
a huge work.
A clear workaround is what this PR does: when "Save", load a clear INI
instance and save it.
Partially fix #25377, the "install" page needs more fine tunes.
