Previously, if a invalid form was submitted (for example issue with no
title), the form could not be re-submitted again because the button
would not stay stuck in loading state. Fix that by hooking the 'submit'
event instead which triggers only when the form is valid.
This enables git.Command's Run to optionally use the given context directly so its deadline will be respected. Otherwise, it falls back to the previous behavior of using the supplied timeout or a default timeout value of 360 seconds.
repo's serviceRPC() calls now use the context's deadline (which is unset/unlimited) instead of the default 6-minute timeout. This means that large repo clones will no longer arbitrarily time out on the upload-pack step, and pushes can take longer than 6 minutes on the receive-pack step.
Fixes #20680
* Add username check to doctor
- Add a new breaking change detector to Gitea's doctor, which checks if
all users still have a valid username according to Gitea. Given from
time-to-time we need to make changes, either due to new routes or due to
security, it's for a instance's admin to check if all users still have a
valid username.
* Fix extra argument
* Apply suggestions from code review
* Apply suggestions from code review
Keep the same behavior as 1.16
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
Co-authored-by: Tyrone Yeh <tyrone_yeh@draytek.com>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
The code for detection of lines in highlight.go is somewhat too complex
and doesn't take account of how Chroma is actually splitting things into
lines for us.
Remove both the .line and .cl classes from Chroma's HTML which made
the old conditional work again. This fixed Copy of YAML files while also
reducing the amount of rendered HTML nodes.
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
- Backport of #20616
- Git only decides to use the Wire 2 protocol when `git {receive,upload}-pack` receive the `GIT_PROTOCOL` environment with as value `version=2`. Currently the internal SSH Server wasn't passing this environment through. The `gitea serv` code already passed all received environments to the git command, so no code changes there.
- This is mentioned in Git manual, https://git-scm.com/docs/git#Documentation/git.txt-codeGITPROTOCOLcode
* Clean up and fix clone button script (#20415)
The button 'primary' class needs to be set in a synchronous script to prevent flicker of the button which was regressed recently, fixed that.
Additionally, reduced the two script tags to just one, the previous scripts were actually initializing the buttons thrice on the empty repo page, now it only initializes once. Finally, removed duplicate code and re-used the inline function in the update code as well.
I had to split out the script into a separate template as on the empty repo page, the script needs access to the clone URL span in the example text, which is rendered below the clone buttons, so buttons and script could not be combined.
* Add default value for clone URLs
Default clone URLs to HTTP(S) in DOM rendering. JS will immediately
replace this if the user preference is SSH.
Fixes: https://github.com/go-gitea/gitea/issues/20558
WebAuthn have updated their specification to set the maximum size of the
CredentialID to 1023 bytes. This is somewhat larger than our current
size and therefore we need to migrate.
The PR changes the struct to add CredentialIDBytes and migrates the CredentialID string
to the bytes field before another migration drops the old CredentialID field. Another migration
renames this field back.
Fix #20457
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: zeripath <art27@cantab.net>
- Always respect the user's configured mime type map
- Allow more types like image/pdf/video/audio to serve with correct content-type
- Shorten cache duration of raw files to 5 minutes, matching GitHub
- Don't set `content-disposition: attachment`, let the browser decide whether it wants to download or display a file directly
- Implement rfc5987 for filenames, remove previous hack. Confirmed it working in Safari.
- Make PDF attachment work in Safari by removing `sandbox` attribute.
This change will make a lot more file types open directly in browser now. Logic should generally be more readable than before with less `if` nesting and such.
Replaces: https://github.com/go-gitea/gitea/pull/20460
Replaces: https://github.com/go-gitea/gitea/pull/20455
Fixes: https://github.com/go-gitea/gitea/issues/20404
- Since #20108 we have two version of the notification bell, one for
mobile the other for non-mobile. However the code only accounts for one
notification count and thus was only updating the non-mobile one.
- This code fixes that by applying the code for all `.notification_count`s.
- Frontport will be in #20543
There is a subtle bug in the code relating to collating the results of
`git ls-files -u -z` in `unmergedFiles()`. The code here makes the
mistake of assuming that every unmerged file will always have a stage 1
conflict, and this results in conflicts that occur in stage 3 only being
dropped.
This PR simply adjusts this code to ensure that any empty unmergedFile
will always be passed down the channel.
The PR also adds a lot of Trace commands to attempt to help find future
bugs in this code.
Fix #19527
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: zeripath <art27@cantab.net>
Backport #20476
The code in modules/ssh/ssh.go:sessionHandler() currently cause an error to be
logged if `gitea serv` exits with a exit(1). This logging is useless because the
accompanying stderr is not provided and in any case the exit(1) is most likely due
to permissions errors.
Further it then causes the EOF to be logged - even though this is not helpful.
This PR simply checks the errors returned and stops logging them.
In the case of misconfigurations causing `gitea serv` to fail with exit(1)
the current logging is not helpful at determining this and users should simply
review the message passed over the ssh connection.
Fix #20473
Signed-off-by: Andrew Thornton <art27@cantab.net>
There are existing packages out there whose version do not conform to SemVer, yet, one would like to have them available in a generic package repository. To this end, remove the SemVer restriction on package versions when using the Generic package registry, and replace it with a check that simply makes sure the version isn't empty.
Signed-off-by: Gergely Nagy <me@gergo.csillger.hu>
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Gergely Nagy <algernon@users.noreply.github.com>
Backport #20412
A lot of existing packages do not conform to SemVer, yet, they should be allowed
in the Conan package registry as-is. To achieve this, remove the SemVer check
from `NewRecipeReference`, and replace it with a simple empty string check.
A unit test with a non-semver version is also included.
Fixes #20405.
Signed-off-by: Gergely Nagy <me@gergo.csillger.hu>
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Co-authored-by: Gergely Nagy <algernon@users.noreply.github.com>
- This is a regression of improving mobile experience on Gitea, currently organization dashboard aren't readable and the popup won't show up when you want to switch between users/organization(as we saw in #19978).
- This patch fixes that, by allowing the popup to allocate the required pixels(for some absurd reason, z-index doesn't work on the popup, so it's not able to render over the existing elements, we can investigate later of why this is). And also remove the additional dropdown menu for the pages link, so it's one unified list which then can be displayed as rows.
* Modify milestone search keywords to be case insensitive (#20266)
Milestone search keywords are now sensitive, this modification is changed to insensitive
* Modify for #18437
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
`no-transform` allegedly disables CloudFlare auto-minify and we did not
set caching headers on html or api requests, which seems good to have
regardless.
Transformation is still allowed for asset requests.
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Andrew Thornton <art27@cantab.net>
Backport #20272
Unfortunately it appears that 2048 bit RSA keys can occasionally be created in such
a way that they appear to have 2047 bit length. This PR simply changes our defaults to
allow these.
Fix #20249
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
When viewing a subdirectory and the latest commit to that directory in
the table, the commit status icon incorrectly showed the status of the
HEAD commit instead of the latest for that directory.
When you create a new release(e.g. via Tea) and specify a tag that already exists on the repository, Gitea will instead use the `UpdateRelease` functionality. However it currently doesn't set the Target field. This PR fixes that.
Backport #20373
Cron will try to run certain things at startup but these depend on multiple things
being set-up. Therefore we should initialize cron last.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Backport #20371
Xorm 1.3.2-0.20220714055524 contains a fix for interpreting db column sizes. Prior to this fix xorm would assume that the size of a column was within the range of an `int`. This is correct on 64bit machines where `int` is typical equivalent to `int64` however, on 32bit machines `int` tends to be `int32`.
Unfortunately the size of a LONGTEXT field is actually `max_uint32`, thus using `strconv.Atoi` on these fields will fail and thus #20161 occurs on 32 bit arm. Xorm 1.3.2-0.20220714055524 changes this field to use int64 instead.
Fix #20161
