This change deprecates
`Deno.CreateHttpClientOptions.{certChain,privateKey}` in favour of
`Deno.CreateHttpClientOptions.{cert,key}`.
Closes #22278
Co-authored-by: Matt Mastracci <matthew@mastracci.com>
The format of the sanitizers will change a little bit:
- If multiple async ops leak and traces are on, we repeat the async op
header once per stack trace.
- All leaks are aggregated under a "Leaks detected:" banner as the new
timers are eventually going to be added, and these are neither ops nor
resources.
- `1 async op` is now `An async op`
- If ops and resources leak, we show both (rather than op leaks masking
resources)
Follow-on to https://github.com/denoland/deno/pull/22226
Splitting the sleep and interval ops allows us to detect an interval
timer. We also remove the use of the `op_async_void_deferred` call.
A future PR will be able to split the op sanitizer messages for timers
and intervals.
This changes the lockfile to not store JSR specifiers in the "remote"
section. Instead a single JSR integrity is stored per package in the
lockfile, which is a hash of the version's `x.x.x_meta.json` file, which
contains hashes for every file in the package. The hashes in this file
are then compared against when loading.
Additionally, when using `{ "vendor": true }` in a deno.json, the files
can be modified without causing lockfile errors—the checksum is only
checked when copying into the vendor folder and not afterwards
(eventually we should add this behaviour for non-jsr specifiers as
well). As part of this change, the `vendor` folder creation is not
always automatic in the LSP and running an explicit cache command is
necessary. The code required to track checksums in the LSP would have
been too complex for this PR, so that all goes through deno_graph now.
The vendoring is still automatic when running from the CLI.
Note: tests are not the only part of the codebase that uses `std`. Other
parts, like `tools/`, do too. So, it could be argued that this is a
little misleading. Either way, I'm doing this as discussed with
@mmastrac.
This introduces the `denort` binary - a slim version of deno without
tooling. The binary is used as the default for `deno compile`.
Improves `deno compile` final size by ~2.5x (141 MB -> 61 MB) on Linux
x86_64.
This implementation heavily depends on there being a lockfile, meaning
JSR specifiers will always diagnose as uncached unless it's there. In
practice this affects cases where a `deno.json` isn't being used. Our
NPM specifier support isn't subject to this.
The reason for this is that the version constraint solving code is
currently buried in `deno_graph` and not usable from the LSP, so the
only way to reuse that logic is the solved-version map in the lockfile's
`packages.specifiers`.
This looks like a massive PR, but it's only a move from cli/tests ->
tests, and updates of relative paths for files.
This is the first step towards aggregate all of the integration test
files under tests/, which will lead to a set of integration tests that
can run without the CLI binary being built.
While we could leave these tests under `cli`, it would require us to
keep a more complex directory structure for the various test runners. In
addition, we have a lot of complexity to ignore various test files in
the `cli` project itself (cargo publish exclusion rules, autotests =
false, etc).
And finally, the `tests/` folder will eventually house the `test_ffi`,
`test_napi` and other testing code, reducing the size of the root repo
directory.
For easier review, the extremely large and noisy "move" is in the first
commit (with no changes -- just a move), while the remainder of the
changes to actual files is in the second commit.
Removes the `FileFetcher`'s internal cache because I don't believe it's
necessary (we already cache this kind of stuff in places like deno_graph
or config files in different places). Removing it fixes this bug because
this functionality was already implemented in deno_graph and lowers
memory usage of the CLI a little bit.
This PR separates integration tests from CLI tests into a new project
named `cli_tests`. This is a prerequisite for an integration test runner
that can work with either the CLI binary in the current project, or one
that is built ahead of time.
## Background
Rust does not have the concept of artifact dependencies yet
(https://github.com/rust-lang/cargo/issues/9096). Because of this, the
only way we can ensure a binary is built before running associated tests
is by hanging tests off the crate with the binary itself.
Unfortunately this means that to run those tests, you _must_ build the
binary and in the case of the deno executable that might be a 10 minute
wait in release mode.
## Implementation
To allow for tests to run with and without the requirement that the
binary is up-to-date, we split the integration tests into a project of
their own. As these tests would not require the binary to build itself
before being run as-is, we add a stub integration `[[test]]` target in
the `cli` project that invokes these tests using `cargo test`.
The stub test runner we add has `harness = false` so that we can get
access to a `main` function. This `main` function's sole job is to
`execvp` the command `cargo test -p deno_cli`, effectively "calling"
another cargo target.
This ensures that the deno executable is always correctly rebuilt before
running the stub test runner from `cli`, and gets us closer to be able
to run the entire integration test suite on arbitrary deno executables
(and therefore split the build into multiple phases).
The new `cli_tests` project lives within `cli` to avoid a large PR. In
later PRs, the test data will be split from the `cli` project. As there
are a few thousand files, it'll be better to do this as a completely
separate PR to avoid noise.
- Move a workers test to js_unit_tests and make it work
- (slightly) repair the websocketstream_test and make it a JS unit test.
This test was being ignored and rotted quite a bit, but there's some
value in running as much of it as we can.
- Merge the two websocket test files
This removes the majority of `../../../../../../test_util` relative
imports from the codebase, allowing us to move this code more easily in
the future.
This commit removes some not really necessary FFI tests and in effect
removes them from being accessible from the user code.
This lowers the number of ops accessible to user code to 16.
Hacky quick fix. The real fix is a lot more work to do (move the
`SourceTextInfo` into all the diagnostics in order to make this less
error pone). I've already started on it, but it will require a lot of
downstream create changes.
Closes #22288
Auth tokens may be specified for one of the following:
- `abc123@deno.land`: `deno.land`, `www.deno.land`, etc
- `abc123@deno.land:8080`: `deno.land:8080`, `www.deno.land:8080`, etc
- `abc123@1.1.1.1`: IP `1.1.1.1` only
- `abc123@1.1.1.1:8080`: IP `1.1.1.1`, port 8080 only
- `abc123@[ipv6]`: IPv6 `[ipv6]` only
- `abc123@[ipv6]:8080`: IPv6 `[ipv6]`, port 8080 only
Leading dots are ignored, so `.deno.dev` is equivalent to `deno.dev`.
This moves the op sanitizer descriptions into Rust code and prepares for
eventual op import from `ext:core/ops`. We cannot import these ops from
`ext:core/ops` as the testing infrastructure ops are not always present.
Changes:
- Op descriptions live in `cli` code and are currently accessible via an
op for the older sanitizer code
- `phf` dep moved to workspace root so we can use it here
- `ops.op_XXX` changed to to `op_XXX` to prepare for op imports later
on.
This commit adds `ppid` getter for `node:process` to improve Node
compatibility one step further.
There is one problem though, which is that `Deno.ppid`, which
`process.ppid` internally calls, is actually of type `bigint` although
it's supposed to be `number`. I filed an issue for this (#22166). For
the time being, explciit type conversion from `bigint` to `number` is
applied to match the Node.js behavior.
Fixes https://github.com/denoland/deno/issues/22180
Matches the Node.js implementation more closely. Removed types, they do
not help just make it harder to debug with stack traces.
This commit adds a list of ops to `runtime/99_main.js` that are
currently relying on getting them from `Deno.core.ops`. All ops that are not
present in the list are removed from `Deno.core.ops` on startup (they are
imported from "virtual op module" - `ext:core/ops`) making them effectively
inaccessible to user code.
This change lowers the number of ops exposed to user code from 650 to
around 260. This number should be gradually decreased in follow-up PRs.
Step 1 of the Rustification of sanitizers, which unblocks the faster
timers.
This replaces the resource sanitizer with a Rust one, using the new APIs
in deno_core.
This commit adds automatic expansion of "imports" field in "deno.json"
file.
If "npm:" or "jsr:" imports are encountered we automatically try to add
a "directory" remapping.
Previously users had to specify entries for both `foo` and `foo/` to be
able to import like
`import { symbol1 } from "foo";` and `import { symbol2 } from
"foo/some_file.js"`:
```
{
"imports": {
"foo": "npm:@foo/bar",
"foo/": "npm:/@foo/bar/",
}
```
With this change users can only add entry for `foo`:
```
{
"imports": {
"foo": "npm:@foo/bar",
}
```
The entry for `foo/` will be provided automatically.
Similarly if user provides "directory" remapping explicitly, we will not
overwrite it.
For removal in Deno v2. There are two issues:
1. Any script being run causes the output of `warnOnDeprecatedApi()` to
be printed, even when none of the `rid` properties are called.
2. `.rid` of these classes is used in multiple tests. I'm not sure how
to account for that. I thought of having `STDIN_RID`, and friends,
constants, whose values can be shared between the tests and the classes
themselves. Should we go with that or do something else?
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
For removal in Deno v2. I've also updated the deprecation of
`Deno.FsWatcher.return()`, which, to be clear, I'm not in favour of
deprecating. I mention this in #15499. Either way, it's safe to merge
this PR, then decide against the deprecation.
- changed `Deno.UnsafeWindowSurface` typings from accepting
`Deno.UnsafePointerView` to `Deno.PointerValue`
- added width and height to `GPUCanvasConfiguration`
Removes weird "frame like" characters and simplifies the output:
```
warning: Use of deprecated "Deno.isatty()" API. This API will be removed in Deno 2.
Stack trace:
at file:///Users/ib/dev/deno/foo.js:2:8
hint: Use `stdStream.isTerminal()` instead.
warning: Use of deprecated "Deno.isatty()" API. This API will be removed in Deno 2.
Stack trace:
at file:///Users/ib/dev/deno/foo.js:7:8
hint: Use `stdStream.isTerminal()` instead.
```
https://github.com/denoland/deno/assets/13602871/7a6e24bf-44ec-4dbf-ac96-2af1db9f2ab9
This commit deprecates `window` global and adds deprecation
notice on each use of `window`.
We decided to proceed with removal of `window` global variable in Deno
2.0. There's a lot of code
in the wild that uses pattern like this:
```
if (typeof window !== "undefined) {
...
}
```
to check if the code is being run in browser. However, this check passes
fine in Deno and
most often libraries that do this check try to access some browser API
that is not available
in Deno, or use DOM APIs (which are also not available in Deno).
This situation has occurred multiple times already
and it's unfeasible to expect the whole ecosystem to migrate to new
check (and even if that
happened there's a ton of code that's already shipped and won't change).
The migration is straightfoward - replace all usages of `window` with
`globalThis` or `self`.
When Deno encounters use of `window` global it will now issue a warning,
steering users
towards required changes:
```
Warning
├ Use of deprecated "window" API.
│
├ This API will be removed in Deno 2.0. Make sure to upgrade to a stable API before then.
│
├ Suggestion: Use `globalThis` or `self` instead.
│
├ Suggestion: You can provide `window` in the current scope with: `const window = globalThis`.
│
└ Stack trace:
└─ at file:///Users/ib/dev/deno/foo.js:7:1
```
Ref https://github.com/denoland/deno/issues/13367.
This commit adds support for [TC39 Decorator
Proposal](https://github.com/tc39/proposal-decorators).
These decorators are only available in transpiled sources - ie.
non-JavaScript files (because of lack of support in V8).
This entails that "experimental TypeScript decorators" are not available
by default
and require to be configured, with a configuration like this:
```
{
"compilerOptions": {
"experimentalDecorators": true
}
}
```
Closes https://github.com/denoland/deno/issues/19160
---------
Signed-off-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Co-authored-by: crowlkats <crowlkats@toaxl.com>
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
This change sets the removal version for the `deno bundle` sub-command
for Deno v2. The warnings appear when `deno bundle` is run and in the
`--help` menu.
This change:
1. Implements `Deno.FsFile.sync()` and `Deno.FsFile.syncSync()`.
2. Deprecates `Deno.fsync()` and `Deno.fsyncSync()` for removal in Deno
v2, in favour of the above corresponding methods.
Related #21995
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This change:
1. Implements `Deno.FsFile.dataSync()` and `Deno.FsFile.dataSyncSync()`.
2. Deprecates `Deno.fdatasync()` and `Deno.fdatasyncSync()` for removal
in Deno v2, in favour of the above corresponding methods.
3. Replaces use of `Deno.fdatasync()` and `Deno.fdatasyncSync()` with
the above instance methods.
Related #21995
Most uses of `Deno.resources()` within tests, as they previously checked
for leaked resources. This is not needed as the test runner does this
automatically. Other internal uses of this API have been replaced with
the internal `Deno[Deno.internal].core.resources()`.
This change:
1. Implements `Deno.stdin.isTerminal()`, `Deno.stdout.isTerminal()` and
`Deno.stderr.isTerminal()`.
2. Deprecates `Deno.isatty()` for removal in Deno v2, in favour of the
above instance methods.
3. Replaces use of `Deno.isatty()` with the above instance methods.
Related #21995
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
This commit adds `import.meta.filename` and `import.meta.dirname` APIs.
These APIs return string representation of filename and containing
dirname.
They are only defined for local modules (modules that have `file:///`
scheme).
Example:
```ts
console.log(import.meta.filename, import.meta.dirname)
```
Unix:
```
$ deno run /dev/my_module.ts
/dev/my_module.ts /dev/
```
Windows:
```
$ deno run C:\dev\my_module.ts
C:\dev\my_module.ts C:\
```
This change sets the removal version of `Deno.customInspect` for Deno
v2.
Towards #22021
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
It appears the `--prompt` flag has done nothing for some time. Perhaps,
since #13650. Classifying this as a dead functionality removal for this
reason.
Did this while working on #22021.
This change:
1. Sets the removal version for `Deno.ListenTlsOptions.certFile`,
`Deno.ListenTlsOptions.keyFile` and `Deno.ConnectTlsOptions.certFile`
for Deno v2, in favour of the `cert`, `key` and `caCerts` options,
respectively.
2. Replaces use of the deprecated options with the new recommended
options.
Towards #22021
This initially uses the new diagnostic printer in `deno lint`,
`deno doc` and `deno publish`. In the limit we should also update
`deno check` to use this printer.
This commit deprecates "--unstable" flag.
When "--unstable" flag is encountered a warning like this is printed:
```
The `--unstable` flag is deprecated, use granular `--unstable-*` flags instead.
Learn more at: https://docs.deno.com/runtime/manual/tools/unstable_flags
```
When "--unstable" flag is used and an unstable API is called an
additional warning like this is printed for each API call:
```
The `Deno.dlopen` API was used with `--unstable` flag. The `--unstable` flag is deprecated, use granular `--unstable-ffi` instead.
Learn more at: https://docs.deno.com/runtime/manual/tools/unstable_flags
```
When no "--unstable-*" flag is provided and an unstable API is called
following
warning is issued before exiting:
```
Unstable API 'Deno.dlopen'. The `--unstable-ffi` flag must be provided.
```
---------
Signed-off-by: Divy Srivastava <dj.srivastava23@gmail.com>
Signed-off-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
Co-authored-by: Asher Gomez <ashersaupingomez@gmail.com>
This change removes the currently deprecated `Deno.cron()` overload with
`options` as a potential last argument.
This might be fine to do now, in a major release, as `Deno.cron()` is an
unstable API. I thought of doing this while working on #22021. If this
is not ready to remove, I can instead set the removal version of this
overload for Deno v2.
Note: this overload was deprecated in Deno v1.38.2 (#21225). So it's
been deprecated for over 2 months.
This change:
1. Sets the removal version for `Deno.RequestEvent`, `Deno.HttpConn` and
`Deno.serveHttp()` for Deno v2. I thought it might be worth calling
`warnOnDeprecatedApi()` within `Deno.Request` and `Deno.HttpConn`
methods, but I thought just having it called within `Deno.serveHttp()`
might be sufficient.
2. Removes some possibly unneeded related benchmarks.
Towards #22021
Closes https://github.com/denoland/deno/issues/21828.
This API is a huge footgun. And given that "Deno.serveHttp" is a
deprecated API that is discouraged to use (use "Deno.serve()"
instead); it makes no sense to keep this API around.
This is a step towards fully migrating to Hyper 1.
Fixes #21928.
We have a code path which empties the extension sources because they're
expected to be pre-executed in the snapshot. Instead of using
conditional compilation for that, we now just check if a snapshot was
provided.
Removes the `dont_use_runtime_snapshot` feature. We didn't allow not
providing a snapshot unless this feature was provided, now we always do.
Adds the `only_snapshotted_js_sources` feature for us to use in CLI.
This asserts that a snapshot is provided and gates the runtime
transpilation code so it isn't included in the executable.
This change takes advantage of explicit resources management for
`FsFile` instances and tweaks documentation to encourage the use of it.
---------
Signed-off-by: Asher Gomez <ashersaupingomez@gmail.com>
<!--
Before submitting a PR, please read https://deno.com/manual/contributing
1. Give the PR a descriptive title.
Examples of good title:
- fix(std/http): Fix race condition in server
- docs(console): Update docstrings
- feat(doc): Handle nested reexports
Examples of bad title:
- fix #7123
- update docs
- fix bugs
2. Ensure there is a related issue and it is referenced in the PR text.
3. Ensure there are tests that cover the changes.
4. Ensure `cargo test` passes.
5. Ensure `./tools/format.js` passes without changing files.
6. Ensure `./tools/lint.js` passes.
7. Open as a draft PR if your work is still in progress. The CI won't
run
all steps, but you can add '[ci]' to a commit message to force it to.
8. If you would like to run the benchmarks on the CI, add the 'ci-bench'
label.
-->
We were missing the `constants` export in the promise `fs` API which is
available in node.
```ts
import { constants, promises } from "node:fs";
import { constants as fsPromiseConstants } from "node:fs/promises";
console.log(constants === promises.constants); // logs: true
console.log(constants === fsPromiseConstants); // logs: true
```
Fixes https://github.com/denoland/deno/issues/21994
<!--
Before submitting a PR, please read https://deno.com/manual/contributing
1. Give the PR a descriptive title.
Examples of good title:
- fix(std/http): Fix race condition in server
- docs(console): Update docstrings
- feat(doc): Handle nested reexports
Examples of bad title:
- fix #7123
- update docs
- fix bugs
2. Ensure there is a related issue and it is referenced in the PR text.
3. Ensure there are tests that cover the changes.
4. Ensure `cargo test` passes.
5. Ensure `./tools/format.js` passes without changing files.
6. Ensure `./tools/lint.js` passes.
7. Open as a draft PR if your work is still in progress. The CI won't
run
all steps, but you can add '[ci]' to a commit message to force it to.
8. If you would like to run the benchmarks on the CI, add the 'ci-bench'
label.
-->
Ultimately, it came down to using incorrect property names in the
`FakeSocket` constructor. The values are passed under `remoteAddress`,
not `hostname` and `remotePort` instead of `port`.
Fixes https://github.com/denoland/deno/issues/21980
This commit introduces deprecation warnings for "Deno.*" APIs.
This is gonna be quite noisy, but should tremendously help with user
code updates to ensure
smooth migration to Deno 2.0. The warning is printed at each unique call
site to help quickly
identify where code needs to be adjusted. There's some stack frame
filtering going on to
remove frames that are not useful to the user and would only cause
confusion.
The warning can be silenced using "--quiet" flag or
"DENO_NO_DEPRECATION_WARNINGS" env var.
"Deno.run()" API is now using this warning. Other deprecated APIs will
start warning
in follow up PRs.
Example:
```js
import { runEcho as runEcho2 } from "http://localhost:4545/run/warn_on_deprecated_api/mod.ts";
const p = Deno.run({
cmd: [
Deno.execPath(),
"eval",
"console.log('hello world')",
],
});
await p.status();
p.close();
async function runEcho() {
const p = Deno.run({
cmd: [
Deno.execPath(),
"eval",
"console.log('hello world')",
],
});
await p.status();
p.close();
}
await runEcho();
await runEcho();
for (let i = 0; i < 10; i++) {
await runEcho();
}
await runEcho2();
```
```
$ deno run --allow-read foo.js
Warning
├ Use of deprecated "Deno.run()" API.
│
├ This API will be removed in Deno 2.0. Make sure to upgrade to a stable API before then.
│
├ Suggestion: Use "Deno.Command()" API instead.
│
└ Stack trace:
└─ at file:///Users/ib/dev/deno/foo.js:3:16
hello world
Warning
├ Use of deprecated "Deno.run()" API.
│
├ This API will be removed in Deno 2.0. Make sure to upgrade to a stable API before then.
│
├ Suggestion: Use "Deno.Command()" API instead.
│
└ Stack trace:
├─ at runEcho (file:///Users/ib/dev/deno/foo.js:8:18)
└─ at file:///Users/ib/dev/deno/foo.js:13:7
hello world
Warning
├ Use of deprecated "Deno.run()" API.
│
├ This API will be removed in Deno 2.0. Make sure to upgrade to a stable API before then.
│
├ Suggestion: Use "Deno.Command()" API instead.
│
└ Stack trace:
├─ at runEcho (file:///Users/ib/dev/deno/foo.js:8:18)
└─ at file:///Users/ib/dev/deno/foo.js:14:7
hello world
Warning
├ Use of deprecated "Deno.run()" API.
│
├ This API will be removed in Deno 2.0. Make sure to upgrade to a stable API before then.
│
├ Suggestion: Use "Deno.Command()" API instead.
│
└ Stack trace:
├─ at runEcho (file:///Users/ib/dev/deno/foo.js:8:18)
└─ at file:///Users/ib/dev/deno/foo.js:17:9
hello world
hello world
hello world
hello world
hello world
hello world
hello world
hello world
hello world
hello world
Warning
├ Use of deprecated "Deno.run()" API.
│
├ This API will be removed in Deno 2.0. Make sure to upgrade to a stable API before then.
│
├ Suggestion: Use "Deno.Command()" API instead.
│
├ Suggestion: It appears this API is used by a remote dependency.
│ Try upgrading to the latest version of that dependency.
│
└ Stack trace:
├─ at runEcho (http://localhost:4545/run/warn_on_deprecated_api/mod.ts:2:18)
└─ at file:///Users/ib/dev/deno/foo.js:20:7
hello world
```
Closes #21839
Transpiler doing type checking such as the ones used in dnt or bundler
fail because of incompatible Worker types if env like browser are
targeted.
Signed-off-by: Jérôme Benoit <jerome.benoit@sap.com>
This commit removes the requirement for `--unstable` flag in `deno
jupyter` subcommand. The process will no longer exit if this flag is not
provided, however the subcommand itself is still considered unstable
and might change in the future.
Required for https://github.com/denoland/deno/pull/21452
This commit adds support for [Stage 3 Temporal API
proposal](https://tc39.es/proposal-temporal/docs/).
The API is available when `--unstable-temporal` flag is passed.
---------
Signed-off-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Co-authored-by: David Sherret <dsherret@gmail.com>
Co-authored-by: Kenta Moriuchi <moriken@kimamass.com>
This commit removes conditional type-checking of unstable APIs.
Before this commit `deno check` (or any other type-checking command and
the LSP) would error out if there was an unstable API in the code, but not
`--unstable` flag provided.
This situation hinders DX and makes it harder to configure Deno. Failing
during runtime unless `--unstable` flag is provided is enough in this case.
This was incorrectly being stored so the AOT cache for JSR specifiers
wasn't being used. I added a wrapper type to help prevent the API being
used incorrectly.
This commit adds support for "rejectionhandled" Web Event and
"rejectionHandled" Node event.
```js
import process from "node:process";
process.on("rejectionHandled", (promise) => {
console.log("rejectionHandled", reason, promise);
});
window.addEventListener("rejectionhandled", (event) => {
console.log("rejectionhandled", event.reason, event.promise);
});
```
---------
Co-authored-by: Matt Mastracci <matthew@mastracci.com>
<!--
Before submitting a PR, please read https://deno.com/manual/contributing
1. Give the PR a descriptive title.
Examples of good title:
- fix(std/http): Fix race condition in server
- docs(console): Update docstrings
- feat(doc): Handle nested reexports
Examples of bad title:
- fix #7123
- update docs
- fix bugs
2. Ensure there is a related issue and it is referenced in the PR text.
3. Ensure there are tests that cover the changes.
4. Ensure `cargo test` passes.
5. Ensure `./tools/format.js` passes without changing files.
6. Ensure `./tools/lint.js` passes.
7. Open as a draft PR if your work is still in progress. The CI won't
run
all steps, but you can add '[ci]' to a commit message to force it to.
8. If you would like to run the benchmarks on the CI, add the 'ci-bench'
label.
-->
---------
Signed-off-by: Matt Mastracci <matthew@mastracci.com>
Co-authored-by: Matt Mastracci <matthew@mastracci.com>
Ensures the Deno process is brought down even when the runtime gets hung
up on something.
Marvin found that the lsp was running without a parent vscode around so
this is maybe/probably related.
Fixes https://github.com/denoland/deno/issues/21840
The problem was hard to reproduce as its a race condition. I've added a
test that reproduces the problem 1/10 tries. We should move the
idleTimeout handling to Rust (maybe even built into fastwebsocket).
We were calling `expand_glob` on our excludes, which is very expensive
and unnecessary because we can pattern match while traversing instead.
1. Doesn't expand "exclude" globs. Instead pattern matches while walking
the directory.
2. Splits up the "include" into base paths and applicable file patterns.
This causes less pattern matching to occur because we're only pattern
matching on patterns that might match and not ones in completely
unrelated directories.
This defines the removal version of v2 for the following APIs that
favour the Streams API:
* `Deno.copy()`
* `Deno.File`
* `Deno.iter()`
* `Deno.Buffer`
* `Deno.readAll()`
* `Deno.readAllSync()`
* `Deno.writeAll()`
* `Deno.writeAllSync()`
* `Deno.FsWatcher.return()`
Part 1 of a potential 3 part series. Ref #13449
The current implementation passes key material back and forth RustCrypto
group of crates and ring. ring does not implement p521 yet.
This PR adds support for P521 named curve in `generateKey` and
`importKey` where we use RustCrypto. Other parts should be moved over to
the RustGroup group of crates for consistency.
This PR fixes #21658.
- `check` subcommand sees `exclude` option in `deno.json`. When some
paths passed with `check` command listed in `exclude`, they are ignored.
- When some files are listed in `exclude` and imported indirectly among
module graph, they are checked.
Harden the code that does permission checks to protect against
re-opening of stdin.
Code that runs FFI is vulnerable to an attack where fd 0 is closed
during a permission check and re-opened with a file that contains a
positive response (ie: `y` or `A`). While FFI code is dangerous in
general, we can make it more difficult for FFI-enabled code to bypass
additional permission checks.
- Checks to see if the underlying file for stdin has changed from the
start to the end of the permission check (detects races)
- Checks to see if the message is excessively long (lowering the window
for races)
- Checks to see if stdin and stderr are still terminals at the end of
the function (making races more difficult)
