Use `access` on *nix and `GetFileAttributesW` on Windows.
[Benchmark](https://paste.divy.work/p/-gq8Ark.js):
```
$ deno run -A bench.mjs # main (568dd)
existsSync: 8980.636629ms
$ target/release/deno run -A bench.mjs # this PR
existsSync: 6448.7604519999995ms
$ bun bench.mjs
existsSync: 6562.88671ms
$ node bench.mjs
existsSync: 7740.064653ms
```
Ref https://github.com/denoland/deno/pull/24434#discussion_r1679777912
This PR stubs `perf_hooks.eventLoopUtilization` to make the tests of
[hapi](https://github.com/hapijs/hapi) start. Previously, they'd all
error because of this function throwing a not implemented error. This
brings down the test failures in their suite from 982 to 68 failures.
Adds support for running npm package lifecycle scripts, opted into via a
new `--allow-scripts` flag.
With this PR, when running `deno cache` (or `DENO_FUTURE=1 deno
install`) you can specify the `--allow-scripts=pkg1,pkg2` flag to run
lifecycle scripts attached to the given packages.
Note at the moment this only works when `nodeModulesDir` is true (using
the local resolver).
When a package with un-run lifecycle scripts is encountered, we emit a
warning suggesting things may not work and to try running lifecycle
scripts. Additionally, if a package script implicitly requires
`node-gyp` and it's not found on the system, we emit a warning.
Extra things in this PR:
- Extracted out bits of `task.rs` into a separate module for reuse
- Added a couple fields to `process.config` in order to support
`node-gyp` (it relies on a few variables being there)
- Drive by fix to downloading new npm packages to test registry
---
TODO:
- [x] validation for allow-scripts args (make sure it looks like an npm
package)
- [x] make allow-scripts matching smarter
- [ ] figure out what issues this closes
---
Review notes:
- This adds a bunch of deps to our test registry due to using
`node-gyp`, so it's pretty noisy
The implementation for `assert.throws()` from `node:assert` didn't work
when the expected value was an `Error` constructor. In this case the
thrown error should checked if it's an instance of said constructor.
Fixes https://github.com/denoland/deno/issues/24464
Previously we had many different code paths all
handling digests in different places, all with
wildly different digest support. This commit
rewrites this to use a single digest handling
mechanism for all digest operations.
It adds various aliases for digest algorithms,
like node does. For example
`sha1WithRSAEncryption` is an alias for `sha1`.
It also adds support for `md5-sha1` digests in
various places.
It's perfectly valid to access `server.address()` before calling
`.listen()`. Until a server actively listens on a socket Node will
return `null` here, but we threw a "Cannot access property 'port' of
undefined" instead.
This was discovered when inspecting failures in Koa's test suite with
Deno.
Part of #18218
- Adds `fs.lutimes` and `fs.lutimesSync` to our node polyfills. To do
this I added methods to the `FileSystem` trait + ops to expose the
functionality to JS.
- Exports `fs._toUnixTimestamp`. Node exposes an internal util
`toUnixTimestamp` from the fs module to be used by unit tests (so we
need it for the unit test to pass unmodified). It's weird because it's
only supposed to be used internally but it's still publicly accessible
- Matches up error handling and timestamp handling for fs.futimes and
fs.utimes with node
- Enables the node_compat utimes test - this exercises futimes, lutimes,
and utimes.
Changes in this PR:
- Added new fixed size hash algorithms (blake2b512, blake2s256,
sha512-224, sha512-256, sha3-224, sha3-256, sha3-384, sha3-512, sm3)
- Added variable size hash algorithms (the concept), with the algorithms
shake128 and shake256
- Use cppgc instead of resources for the hasher
- Enable Node's crypto.Hash tests and fix found bugs
- add fallback impls of external string apis which always copy. after
upstream changes to rusty_v8 we can support non-copying api as well.
- `napi_get_buffer_data` needs to work on all TypedArray instances.
- Fixes: https://github.com/denoland/deno/issues/24209
- `target_defaults.default_configuration` is used by some modules to
find the corresponding node file from node-gyp
- `node_api_get_module_filename` expects the filename to be a `file:`
url.
Previously res.setHeader("foo", ["bar", "baz"]) added a single header
with a value of `bar,baz`. Really this should add two separate headers.
This is visible in `set-cookie` for example.
This commits adds the ability to set a would-be exit code
for the Deno process without forcing an immediate exit,
through the new `Deno.exitCode` API.
- **Implements `Deno.exitCode` getter and setter**: Adds support for
setting
and retrieving a would-be exit code via `Deno.exitCode`.
This allows for asynchronous cleanup before process termination
without immediately exiting.
- **Ensures type safety**: The setter for `Deno.exitCode` validates that
the provided value is a number, throwing a TypeError if not, to ensure
that
only valid exit codes are set.
Closes to #23605
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This commit changes `gzip` compression in `Deno.serve` API to flush data
after each write. There's a slight performance regression, but provided
test shows a scenario that was not possible before.
---------
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
We didn't honour the `position` options of `fd.read` and `fd.write`
because we checked if the buffer is of type `Buffer` instead of just
`Uint8Array`. Node does the latter. In doing so I noticed that the file
handle id was written to a public property which it definitely shouldn't
be. This was probably a typo.
Fixes https://github.com/denoland/deno/issues/23707
We didn't support the `throwIfNoEntry` option for Node's `fs.lstatSync`
method. Note that the async variant doesn't have this option.
Fixes https://github.com/denoland/deno/issues/23996
Node sets the default HTTP response status code to 200 on the
`ServerResponse`. We initialised it as `undefined` before which caused a
problem with 11ty's dev server.
Thanks to @vrugtehagel for reporting this issue and finding the correct
fix as well 🎉
Fixes https://github.com/denoland/deno/issues/23970
The flag lets us exit from read loop without throwing an error when
the stream is cancelled.
This fixes gRPC cancellation example.
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This stubs `findSourceMap` in `node:module` by always returning
`undefined` as if it never found a source map. This unblocks the `ava`
test runner.
Fixes https://github.com/denoland/deno/issues/18666
Some npm libraries like `signal-exit` rely on the length of the listener
array returned by `process.listeners("SIGNT")` to be correct to
function. We weren't tracking `SIG*` events there, which broke those npm
libraries.
Fixes https://github.com/denoland/deno/issues/22892
the last commit had a regression, where it removed this branch, I
haven't tested the code but I think it should work
---------
Signed-off-by: Bedis Nbiba <bedisnbiba@gmail.com>
Popular test runners like Jest instantiate a new `Process` object
themselves and expect the class constructor to be callable without the
`new` keyword. This PR refactors our `Process` class implementation from
a proper ES2015 class to an ES5-style class which can be invoked both
with and without the `new` keyword like in Node.
Fixes https://github.com/denoland/deno/issues/23863
gRPC depends only on the END_STREAM flag to emit "trailers" event which
is responsible to propagate the errors correctly. This patch uses
Body::is_end_stream() to determine if a stream will end and set the
END_STREAM flag.
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
<!--
Before submitting a PR, please read
https://docs.deno.com/runtime/manual/references/contributing
1. Give the PR a descriptive title.
Examples of good title:
- fix(std/http): Fix race condition in server
- docs(console): Update docstrings
- feat(doc): Handle nested reexports
Examples of bad title:
- fix #7123
- update docs
- fix bugs
2. Ensure there is a related issue and it is referenced in the PR text.
3. Ensure there are tests that cover the changes.
4. Ensure `cargo test` passes.
5. Ensure `./tools/format.js` passes without changing files.
6. Ensure `./tools/lint.js` passes.
7. Open as a draft PR if your work is still in progress. The CI won't
run
all steps, but you can add '[ci]' to a commit message to force it to.
8. If you would like to run the benchmarks on the CI, add the 'ci-bench'
label.
-->
Fixes https://github.com/denoland/deno/issues/23801
---------
Signed-off-by: Marvin Hagemeister <marvinhagemeister50@gmail.com>
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
<!--
Before submitting a PR, please read
https://docs.deno.com/runtime/manual/references/contributing
1. Give the PR a descriptive title.
Examples of good title:
- fix(std/http): Fix race condition in server
- docs(console): Update docstrings
- feat(doc): Handle nested reexports
Examples of bad title:
- fix #7123
- update docs
- fix bugs
2. Ensure there is a related issue and it is referenced in the PR text.
3. Ensure there are tests that cover the changes.
4. Ensure `cargo test` passes.
5. Ensure `./tools/format.js` passes without changing files.
6. Ensure `./tools/lint.js` passes.
7. Open as a draft PR if your work is still in progress. The CI won't
run
all steps, but you can add '[ci]' to a commit message to force it to.
8. If you would like to run the benchmarks on the CI, add the 'ci-bench'
label.
-->
Fixes https://github.com/denoland/deno/issues/23397
Part of #22607 (probably closes it, but I haven't done thorough testing)
Makes it so that `require.resolve` with `paths` specified will fallback
to using the global cache when the paths can't be found when using a
global cache (not when using a node_modules folder)
This PR adds private `[REF]()` and `[UNREF]()` methods to Stdin class,
and call them from Node.js polyfill layer (`TTY` class). This enables
`process.stdin.unref()` and `process.stdin.ref()` for the case when
stdin is terminal.
closes #21796
When the response has been successfully send, we abort the
`Request.signal` property to indicate that all resources associated with
this transaction may be torn down.
Most common argument to `env` option for `worker_threads.Worker` will be
`process.env`.
In Deno `process.env` is a `Proxy` which can't be cloned using
structured clone algorithm.
So to be safe, I'm creating a copy of actual object before it's sent to
the worker thread.
Ref #23522
Landing work from #21903, plus fixing a node compat bug.
We were always sending the HTTP/2 ALPN on TLS connections which might
confuse upstream servers.
Changes:
- Configure HTTP/2 ALPN when making the TLS connection from the HTTP/2
code
- Read the `ALPNProtocols` property from the TLS connection options
rather than the deno `alpnProtocols` field
- Add tests
Prereq for landing Deno.serveHttp on Deno.serve: removing older HTTP
servers from the codebase.
Closes https://github.com/denoland/deno/issues/23362
Previously we were panicking if there was a pending read on a
port and `receiveMessageOnPort` was called. This is now fixed
by cancelling the pending read, trying to read a message and
resuming reading in a loop.
This PR follows this fix (https://github.com/nodejs/node/pull/52005) in
Node.js.
Stream's construct callback happens one tick earlier by this change, and
it prevents the reordering of the first few chunks in
`node:stream.Writable`
closes #20284
MessagePort if directly assigned to workerData property instead of
embedding it in an object then it is not patched to a NodeMessagePort.
This commit fixes the bug.
Fixes #23179.
Fixes #22454.
Enables passing `{tokens: true}` to `parseArgs` and setting default
values for options.
With this PR, the observable framework works with deno out of the box
(no unstable flags needed).
The existing code was basically copied straight from node, so this PR
mostly just updates that (out of date) vendored code. Also fixes some
issues with error exports (before this PR, in certain error cases we
were attempting to construct error classes that weren't actually in
scope).
The last change (in the second commit) adds a small hack so that we
actually exercise the `test-parse-args.js` node_compat test, previously
it was reported as passing though it should have failed. That test now
passes.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
The `tools/node_compat/node` submodule has been moved to
`tests/node_compat/runner/suite` and the remaining files within
`tools/node_compat` to `tests/node_compat/runner`.
Most of the changes are of the header within `tests/node_compat/test`
files. The `setup` and `test` tasks within `tests/node_comapt` execute
successfully.
Towards #22525
CC @mmastrac
Slightly different approach to similar changes in #22386
Note that this doesn't use a warmup script -- we are actually just doing
more work at snapshot time.
Fixes #22158.
Basically reimplements the whole `StringDecoder` with a much more direct
translation (read like one-to-one) of node's current logic. The old
implementation was closer to node's super old impl and it was too hard
to keep the code structure while matching the behavior of their new
logic.
This adds support for UTF-16LE, ascii, and latin1.
This also enables the node_compat test, which now passes without
modification.
Stub implementation of getCipherInfo(). Good enough for most cases.
Note: We do not support all OpenSSL ciphers (likely never will)
Fixes https://github.com/denoland/deno/issues/21805
Fixes #19214.
We were using the `idna` crate to implement our polyfill for
`punycode.toASCII` and `punycode.toUnicode`. The `idna` crate is
correct, and adheres to the IDNA2003/2008 spec, but it turns out
`node`'s implementations don't really follow any spec! Instead, node
splits the domain by `'.'` and punycode encodes/decodes each part. This
means that node's implementations will happily work on codepoints that
are disallowed by the IDNA specs, causing the error in #19214.
While fixing this, I went ahead and matched the node behavior on all of
the punycode functions and enabled node's punycode test in our
`node_compat` suite.
This commit fixes race condition in "node:worker_threads" module were
the first message did a setup of "threadId", "workerData" and
"environmentData".
Now this data is passed explicitly during workers creation and is set up
before any user code is executed.
Closes https://github.com/denoland/deno/issues/22783
Closes https://github.com/denoland/deno/issues/22672
---------
Co-authored-by: Satya Rohith <me@satyarohith.com>
Modify `_http_outgoing.ts` to support the extended signature of
`validateHeaderName()` used since node v19.5.0/v18.14.0 by adding the
`label` parameter. (see:
https://nodejs.org/api/http.html#httpvalidateheadernamename-label)
Making both validation functions accessible as public exports of
`node:http`
Fixes: #22614
Fixes #21660
Adds a basic `Immediate` class to mirror `NodeJS.Immediate`, and changes
`setImmediate` and `clearImmediate` to return and accept (respectively)
`Immediate` objects.
Note that for now {ref,unref,hasRef} are effectively stubs, as deno_core
doesn't really natively support immediates (they're currently modeled as
timers with delay of 0). Eventually we probably want to actually
implement these properly.
This commit changes how we figure out if we're running on main
thread in `node:worker_threads` module. Instead of relying on quirky
"magic variable" for a name to check if we're on main thread, we are
now explicitly passing this information during bootstrapping of the
runtime. As a side effect, `WorkerOptions.name` is more useful
and matches what Node.js does more closely (though not fully).
Towards https://github.com/denoland/deno/issues/22783
<!--
Before submitting a PR, please read
https://docs.deno.com/runtime/manual/references/contributing
1. Give the PR a descriptive title.
Examples of good title:
- fix(std/http): Fix race condition in server
- docs(console): Update docstrings
- feat(doc): Handle nested reexports
Examples of bad title:
- fix #7123
- update docs
- fix bugs
2. Ensure there is a related issue and it is referenced in the PR text.
3. Ensure there are tests that cover the changes.
4. Ensure `cargo test` passes.
5. Ensure `./tools/format.js` passes without changing files.
6. Ensure `./tools/lint.js` passes.
7. Open as a draft PR if your work is still in progress. The CI won't
run
all steps, but you can add '[ci]' to a commit message to force it to.
8. If you would like to run the benchmarks on the CI, add the 'ci-bench'
label.
-->
Fixes https://github.com/denoland/deno/issues/18127https://github.com/denoland/deno/issues/17248
SvelteKit works now!
```
$ deno run -A npm:create-svelte@latest my-app
create-svelte version 6.0.9
┌ Welcome to SvelteKit!
│
◇ Which Svelte app template?
│ SvelteKit demo app
│
◇ Add type checking with TypeScript?
│ Yes, using JavaScript with JSDoc comments
│
◇ Select additional options (use arrow keys/space bar)
│ none
│
└ Your project is ready!
✔ Type-checked JavaScript
https://www.typescriptlang.org/tsconfig#checkJs
Install community-maintained integrations:
https://github.com/svelte-add/svelte-add
Next steps:
1: cd my-app
2: npm install
3: git init && git add -A && git commit -m "Initial commit" (optional)
4: npm run dev -- --open
To close the dev server, hit Ctrl-C
Stuck? Visit us at https://svelte.dev/chat
$ cd my-app/
$ deno task dev
Task dev vite dev
VITE v5.1.4 ready in 1632 ms
➜ Local: http://localhost:5173/
➜ Network: use --host to expose
➜ press h + enter to show help
```
<!--
Before submitting a PR, please read
https://docs.deno.com/runtime/manual/references/contributing
1. Give the PR a descriptive title.
Examples of good title:
- fix(std/http): Fix race condition in server
- docs(console): Update docstrings
- feat(doc): Handle nested reexports
Examples of bad title:
- fix #7123
- update docs
- fix bugs
2. Ensure there is a related issue and it is referenced in the PR text.
3. Ensure there are tests that cover the changes.
4. Ensure `cargo test` passes.
5. Ensure `./tools/format.js` passes without changing files.
6. Ensure `./tools/lint.js` passes.
7. Open as a draft PR if your work is still in progress. The CI won't
run
all steps, but you can add '[ci]' to a commit message to force it to.
8. If you would like to run the benchmarks on the CI, add the 'ci-bench'
label.
-->
The issue seems to be already fixed since we upped to a newer 18.x
version string in [another
PR](https://github.com/denoland/deno/pull/20366). Updating to latest
node LTS version can't hurt though.
Fixes https://github.com/denoland/deno/issues/21515
Improves #19100
Fixes #20356
Replaces #20428
Changes made in deno_core to support this:
- [x] Errors must be handled in setTimeout callbacks
- [x] Microtask ordering is not-quite-right
- [x] Timer cancellation must be checked right before dispatch
- [x] Timer sanitizer
- [x] Move high-res timer to deno_core
- [x] Timers need opcall tracing
fixes #22627
This PR fixes a node compat issue that is preventing `serverless-http`
and `serverless-express` npm modules from working with Deno. These
modules are useful for running apps on AWS Lambda (and other serverless
infra).
---------
Signed-off-by: Igor Zinkovsky <igor@deno.com>
This commit adds `ppid` getter for `node:process` to improve Node
compatibility one step further.
There is one problem though, which is that `Deno.ppid`, which
`process.ppid` internally calls, is actually of type `bigint` although
it's supposed to be `number`. I filed an issue for this (#22166). For
the time being, explciit type conversion from `bigint` to `number` is
applied to match the Node.js behavior.
Fixes https://github.com/denoland/deno/issues/22180
Matches the Node.js implementation more closely. Removed types, they do
not help just make it harder to debug with stack traces.
Follow up to #22157.
This leaves us with 4 usages of `ensureFastOps()` in `deno` itself.
There's also about 150 usages of `Deno.core.ops.<op_name>` left as well.
For removal in Deno v2. There are two issues:
1. Any script being run causes the output of `warnOnDeprecatedApi()` to
be printed, even when none of the `rid` properties are called.
2. `.rid` of these classes is used in multiple tests. I'm not sure how
to account for that. I thought of having `STDIN_RID`, and friends,
constants, whose values can be shared between the tests and the classes
themselves. Should we go with that or do something else?
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This change:
1. Implements `Deno.FsFile.sync()` and `Deno.FsFile.syncSync()`.
2. Deprecates `Deno.fsync()` and `Deno.fsyncSync()` for removal in Deno
v2, in favour of the above corresponding methods.
Related #21995
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This change:
1. Implements `Deno.FsFile.dataSync()` and `Deno.FsFile.dataSyncSync()`.
2. Deprecates `Deno.fdatasync()` and `Deno.fdatasyncSync()` for removal
in Deno v2, in favour of the above corresponding methods.
3. Replaces use of `Deno.fdatasync()` and `Deno.fdatasyncSync()` with
the above instance methods.
Related #21995
Most uses of `Deno.resources()` within tests, as they previously checked
for leaked resources. This is not needed as the test runner does this
automatically. Other internal uses of this API have been replaced with
the internal `Deno[Deno.internal].core.resources()`.
This change:
1. Implements `Deno.stdin.isTerminal()`, `Deno.stdout.isTerminal()` and
`Deno.stderr.isTerminal()`.
2. Deprecates `Deno.isatty()` for removal in Deno v2, in favour of the
above instance methods.
3. Replaces use of `Deno.isatty()` with the above instance methods.
Related #21995
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
This commit deprecates "--unstable" flag.
When "--unstable" flag is encountered a warning like this is printed:
```
The `--unstable` flag is deprecated, use granular `--unstable-*` flags instead.
Learn more at: https://docs.deno.com/runtime/manual/tools/unstable_flags
```
When "--unstable" flag is used and an unstable API is called an
additional warning like this is printed for each API call:
```
The `Deno.dlopen` API was used with `--unstable` flag. The `--unstable` flag is deprecated, use granular `--unstable-ffi` instead.
Learn more at: https://docs.deno.com/runtime/manual/tools/unstable_flags
```
When no "--unstable-*" flag is provided and an unstable API is called
following
warning is issued before exiting:
```
Unstable API 'Deno.dlopen'. The `--unstable-ffi` flag must be provided.
```
---------
Signed-off-by: Divy Srivastava <dj.srivastava23@gmail.com>
Signed-off-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
Co-authored-by: Asher Gomez <ashersaupingomez@gmail.com>
<!--
Before submitting a PR, please read https://deno.com/manual/contributing
1. Give the PR a descriptive title.
Examples of good title:
- fix(std/http): Fix race condition in server
- docs(console): Update docstrings
- feat(doc): Handle nested reexports
Examples of bad title:
- fix #7123
- update docs
- fix bugs
2. Ensure there is a related issue and it is referenced in the PR text.
3. Ensure there are tests that cover the changes.
4. Ensure `cargo test` passes.
5. Ensure `./tools/format.js` passes without changing files.
6. Ensure `./tools/lint.js` passes.
7. Open as a draft PR if your work is still in progress. The CI won't
run
all steps, but you can add '[ci]' to a commit message to force it to.
8. If you would like to run the benchmarks on the CI, add the 'ci-bench'
label.
-->
We were missing the `constants` export in the promise `fs` API which is
available in node.
```ts
import { constants, promises } from "node:fs";
import { constants as fsPromiseConstants } from "node:fs/promises";
console.log(constants === promises.constants); // logs: true
console.log(constants === fsPromiseConstants); // logs: true
```
Fixes https://github.com/denoland/deno/issues/21994
<!--
Before submitting a PR, please read https://deno.com/manual/contributing
1. Give the PR a descriptive title.
Examples of good title:
- fix(std/http): Fix race condition in server
- docs(console): Update docstrings
- feat(doc): Handle nested reexports
Examples of bad title:
- fix #7123
- update docs
- fix bugs
2. Ensure there is a related issue and it is referenced in the PR text.
3. Ensure there are tests that cover the changes.
4. Ensure `cargo test` passes.
5. Ensure `./tools/format.js` passes without changing files.
6. Ensure `./tools/lint.js` passes.
7. Open as a draft PR if your work is still in progress. The CI won't
run
all steps, but you can add '[ci]' to a commit message to force it to.
8. If you would like to run the benchmarks on the CI, add the 'ci-bench'
label.
-->
Ultimately, it came down to using incorrect property names in the
`FakeSocket` constructor. The values are passed under `remoteAddress`,
not `hostname` and `remotePort` instead of `port`.
Fixes https://github.com/denoland/deno/issues/21980
This commit adds support for "rejectionhandled" Web Event and
"rejectionHandled" Node event.
```js
import process from "node:process";
process.on("rejectionHandled", (promise) => {
console.log("rejectionHandled", reason, promise);
});
window.addEventListener("rejectionhandled", (event) => {
console.log("rejectionhandled", event.reason, event.promise);
});
```
---------
Co-authored-by: Matt Mastracci <matthew@mastracci.com>
