This PR optimizes the case when `performance.measure()` needs to find
the startMark by name. It is a simple change on `findMostRecent` fn to
avoiding copying and reversing the complete entries list.
Adds minor missing tests for:
- `clearMarks()`, general
- `clearMeasures()`, general
- `measure()`, case when the startMarks name exists more than once
### Benchmarks
#### main
```
CPU | AMD Ryzen 7 PRO 6850U with Radeon Graphics
Runtime | Deno 2.0.0-rc.4 (x86_64-unknown-linux-gnu)
benchmark time/iter (avg) iter/s (min … max) p75 p99 p995
---------------------- ----------------------------- --------------------- --------------------------
worst case measure() 2.1 ms 486.9 ( 1.7 ms … 2.4 ms) 2.2 ms 2.4 ms 2.4 ms
```
#### this PR
```
CPU | AMD Ryzen 7 PRO 6850U with Radeon Graphics
Runtime | Deno 2.0.0-rc.4 (x86_64-unknown-linux-gnu)
benchmark time/iter (avg) iter/s (min … max) p75 p99 p995
---------------------- ----------------------------- --------------------- --------------------------
worst case measure() 966.3 µs 1,035 (876.9 µs … 1.1 ms) 1.0 ms 1.1 ms 1.1 ms
```
```ts
Deno.bench("worst case measure()", (b) => {
performance.mark('start');
for (let i = 0; i < 1e5; i += 1) {
performance.mark(crypto.randomUUID());
}
b.start();
performance.measure('total', 'start');
b.end();
performance.clearMarks();
performance.clearMeasures();
});
```
Fixes rsbuild running in deno.
You can look at the test to see what was failing, the gist is that we
were trying to statically analyze the re-exports of a CJS script, and if
we couldn't find the source for the re-exported file we would fail.
Instead, we should just treat these as if they were too dynamic to
analyze, and let it fail (or succeed) at runtime. This aligns with
node's behavior.
Aligns the error messages in the ext/http and a few messages in the
ext/fetch folder to be in-line with the Deno style guide.
This change-set also removes some unnecessary checks in the 00_serve.ts.
These options were recently removed, so it doesn't make sense to check
for them anymore.
https://github.com/denoland/deno/issues/25269
This fixes the fast path for `readableStreamCollectIntoUint8Array` to
only trigger if the readable stream has not yet been disturbed -
because otherwise we may not be able to close it if the
read errors.
This commit fixes the error format when the cause is assigned
separately, ensuring that the cause is only printed once instead of
twice.
The fix addresses issue
[#21651](https://github.com/denoland/deno/issues/21651).
Contributing toward #24236
- Swapped `Object.assign` for `ObjectAssign` primordial.
- Removed referencing TODO comment.
Please disregard if no longer desired.
Apparently `path/posix` and `path/win32` have circular exports. I do not
know why.
Additionally there's a deprecated function `_makeLong` which is just
`toNamespacedPath`
Closes #20613.
Reimplements the serialization on top of the v8 APIs instead of
deno_core. Implements `v8.Serializer`, `v8.DefaultSerializer`,
`v8.Deserializer`, and `v8.DefaultSerializer`.
implement require(esm) using `op_import_sync` from deno_core.
possible future changes:
- cts and mts
- replace Deno.core.evalContext to optimize esm syntax detection
Fixes: https://github.com/denoland/deno/issues/25487
<!--
Before submitting a PR, please read
https://docs.deno.com/runtime/manual/references/contributing
1. Give the PR a descriptive title.
Examples of good title:
- fix(std/http): Fix race condition in server
- docs(console): Update docstrings
- feat(doc): Handle nested reexports
Examples of bad title:
- fix #7123
- update docs
- fix bugs
2. Ensure there is a related issue and it is referenced in the PR text.
3. Ensure there are tests that cover the changes.
4. Ensure `cargo test` passes.
5. Ensure `./tools/format.js` passes without changing files.
6. Ensure `./tools/lint.js` passes.
7. Open as a draft PR if your work is still in progress. The CI won't
run
all steps, but you can add '[ci]' to a commit message to force it to.
8. If you would like to run the benchmarks on the CI, add the 'ci-bench'
label.
-->
Mark `op_require_break_on_next_statement` as reentrant and properly
release borrow on the `OpState`. This fixes `BorrowMut` assertions when
running with inspector + op metrics.
Fixes https://github.com/denoland/deno/issues/25515
A workaround for the issue #25480
`Deno.Listener` can't be closed synchronously after `accept()` is
called. This PR delays the `accept` call 2 ticks (The listener callback
is called 1 tick later. So the 1 tick delay is not enough), and makes
`net.Server` capable of being closed synchronously.
This unblocks `npm:detect-port` and `npm:portfinder`
closes #18301
closes #25175
Closes https://github.com/denoland/deno/issues/25321
Ended up being a larger refactoring, since we're now juggling
(potentially) two config files in the same `add`, instead of choosing
one. I don't love the shape of the code, but I think it's good enough
Some smaller side improvements:
- `deno remove` supports `jsonc`
- `deno install --dev` will be a really simple change
- if `deno remove` removes the last import/dependency in the
`imports`/`dependencies`/`devDependencies` field, it removes the field
instead of leaving an empty object
This commit adds:
- `addAbortListener` in `node:events`
- `aborted` in `node:util`
- `execPath` and `execvArgs` named export from `node:process`
- `getDefaultHighWaterMark` from `node:stream`
The `execPath` is very hacky - because module namespaces can not have
real getters, `execPath` is an object with a `toString()` method that on
call returns the actual `execPath`, and replaces the `execPath` binding
with the string. This is done so that we don't require the `execPath`
permission on startup.
This commit changes when to cause the hostname substition of `0.0.0.0` ->
`localhost`.
Currently we substitute `localhost` to the hostname on windows before
calling `options.onListen`, which prevents the users to do more advanced
thing using hostname string like
https://github.com/denoland/std/issues/5558. This PR changes it not to
substitute it when the user provide `onListen` callback.
closes #24776
unblocks https://github.com/denoland/std/issues/5558
This change fixes the handling of upgraded socket from `node:http` module.
In `op_node_http_fetch_response_upgrade`, we create DuplexStream paired
with `hyper::upgrade::Upgraded`. When the connection is closed from the
server, the read result from `Upgraded` becomes 0. However because we
don't close the paired DuplexStream at that point, the Socket object in
JS side keeps alive even after the server closed. That caused the issue
#20179
This change fixes it by closing the paired DuplexStream when the
`Upgraded` stream returns 0 read result.
closes #20179
This allows using npm deps of jsr deps without having to add them to the
root package.json.
Works by taking the package requirement and scanning the
`node_modules/.deno` directory for the best matching package, so it
relies on deno's node_modules structure.
Additionally to make the transition from package.json to deno.json
easier, Deno now:
1. Installs npm deps in a deno.json at the same time as installing npm
deps from a package.json.
2. Uses the alias in the import map for `node_modules/<alias>` for
better package.json compatiblity.
Remove `--allow-hrtime` and `--deny-hrtime`. We are doing this because
it is already possible to get access to high resolution timers through
workers and SharedArrayBuffer.
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
`deno bundle` now produces:
```
error: ⚠️ `deno bundle` was removed in Deno 2.
See the Deno 1.x to 2.x Migration Guide for migration instructions: https://docs.deno.com/runtime/manual/advanced/migrate_deprecations
```
`deno bundle --help` now produces:
```
⚠️ `deno bundle` was removed in Deno 2.
See the Deno 1.x to 2.x Migration Guide for migration instructions: https://docs.deno.com/runtime/manual/advanced/migrate_deprecations
Usage: deno bundle [OPTIONS]
Options:
-q, --quiet Suppress diagnostic output
--unstable Enable all unstable features and APIs. Instead of using this flag, consider enabling individual unstable features
To view the list of individual unstable feature flags, run this command again with --help=unstable
```
To ensure consistency across the codebase, this commit refactors the
code in the `ext` folder to use `throw new Error`` instead of `throw`
for throwing errors.
Fixes https://github.com/denoland/deno/issues/25270
Turns out we only virtualized it so one could have a `Console` property,
and the other one not. We can just make this `console.Console` available
everywhere.
Part of #20613.
If a node addon is using the legacy `napi_module_register` on ctor
approach to module registration, we have to store the registered module
so that other threads can load the addon (because `napi_module_register`
will only be called once per process).
Fixes #23281. Part of #20613.
We were emitting the `online` event in the constructor, so the caller
could never receive it (since there was no time for them to add a
listener). Instead, emit the event where it's intended – after the
worker is initialized.
---
After this parcel no longer freezes, but still will fail due to other
bugs (which will be fixed in other PRs)
This commit makes various limit parameters in `deno_kv` configurable.
Currently these values are declared as constants and thus can't be
modified from outside. However, there may be situations where we want to
change it. This commit makes this possible by introducing a new struct
`KvConfig` that needs to be given as the 2nd param in `init_ops`.
- Add missing exports to `node:cluster`
- Fix default export not being an instance of `EventEmitter`
- Fix aliasing of properties
- Fix `disconnected` -> `disconnect` export naming
This makes `log4js` work in Deno. `karma` starts too, but somehow the
server isn't responding. That looks like a different issue.
Fixes https://github.com/denoland/deno/issues/24858
This commit gets deno_node's customizer to use fixed-length array
instead of `Vec` to avoid wrong capacity allocation.
In the previous code we reserve a capacity of 14 for
`external_references`. However, after pushing all the necessary
`ExternalReference`s, it ends up with a length of 21, not 14. This means
another allocation happens even though we reserve some space.
To make sure that there will no longer be extra allocation, it should be
a good idea to use fixed-length array here.
This commit bumps the minimum required version of `dsa` crate to 0.6.3.
This is preferable because `SigningKey::sign_prehashed_rfc6979` function
we use in `deno_node` is available from this version.
Ref: [dsa's CHANGELOG.md](132b046314/dsa/CHANGELOG.md (063-2024-01-28))
- Update ffi turbocall to use revised fast call api
- Remove `v8_version` function calls
- `*mut OwnedIsolate` is no longer stored in OpCtx gotham store
This PR addresses a regression introduced in
https://github.com/denoland/deno/pull/25021 that would cause the
`req.url` parameter in Node's http server to always be a single
character instead of the expected value. The regression was caused by
effectively calling `.indexOf()` on an empty string and thus passing the
wrong index for slicing.
```js
"".indexOf("/") // -> -1
request.url.slice(-1) // effectively only giving us the last character
```
Fixes https://github.com/denoland/deno/issues/25080
PrismJS uses `WorkerGlobalScope` and `self` for detecting browser's Web
Worker context:
59e5a34713/prism.js (L11)
Now the detection logic above is broken when it's imported from Deno's
Web Worker context because we only hide `self` (Prism assumes when
`WorkerGlobalScope` is available, `self` is also available).
This change fixes the above by also hiding `WorkerGlobalScope` global in
Node compat mode.
closes #25008
My fix in #25030 was buggy, I forgot to pass the `byteOffset` and
`byteLength`. Whoops.
I also discovered that fs.read was not respecting the `offset` argument,
and we were constructing a new `Buffer` for the callback instead of just
passing the original one (which is what node does, and the @types/node
definitions also indicate the callback should get the same type).
Fixes #25028.
Linux/macos only currently.
Part of https://github.com/denoland/deno/issues/23524 (fixes it on
platforms other than windows).
Part of #16899 (fixes it on platforms other than windows).
After this PR, playwright is functional on mac/linux.
Adds a `parallel` flag to `deno serve`. When present, we spawn multiple
workers to parallelize serving requests.
```bash
deno serve --parallel main.ts
```
Currently on linux we use `SO_REUSEPORT` and rely on the fact that the
kernel will distribute connections in a round-robin manner.
On mac and windows, we sort of emulate this by cloning the underlying
file descriptor and passing a handle to each worker. The connections
will not be guaranteed to be fairly distributed (and in practice almost
certainly won't be), but the distribution is still spread enough to
provide a significant performance increase.
---
(Run on an Macbook Pro with an M3 Max, serving `deno.com`
baseline::
```
❯ wrk -d 30s -c 125 --latency http://127.0.0.1:8000
Running 30s test @ http://127.0.0.1:8000
2 threads and 125 connections
Thread Stats Avg Stdev Max +/- Stdev
Latency 239.78ms 13.56ms 330.54ms 79.12%
Req/Sec 258.58 35.56 360.00 70.64%
Latency Distribution
50% 236.72ms
75% 248.46ms
90% 256.84ms
99% 268.23ms
15458 requests in 30.02s, 2.47GB read
Requests/sec: 514.89
Transfer/sec: 84.33MB
```
this PR (`with --parallel` flag)
```
❯ wrk -d 30s -c 125 --latency http://127.0.0.1:8000
Running 30s test @ http://127.0.0.1:8000
2 threads and 125 connections
Thread Stats Avg Stdev Max +/- Stdev
Latency 117.40ms 142.84ms 590.45ms 79.07%
Req/Sec 1.33k 175.19 1.77k 69.00%
Latency Distribution
50% 22.34ms
75% 223.67ms
90% 357.32ms
99% 460.50ms
79636 requests in 30.07s, 12.74GB read
Requests/sec: 2647.96
Transfer/sec: 433.71MB
```
Part of #25028.
Our underlying read/write operations in `io` assume the buffer is a
Uint8Array, but we were passing in other typed arrays (in the case above
it was `Int8Array`).
There is no constructor code when creating an inspector `Session`
instance in Node. Also get rid of some symbols which should've been
private properties. This PR doesn't yet add any new implementations
though as these are mostly cosmetic changes.
For some reason we didn't register the `node:inspector` module, which
lead to a panic when trying to import it. This PR registers it.
Related: https://github.com/denoland/deno/issues/25004
