Landing changes required for
https://github.com/denoland/deno_core/pull/359
We needed to update 99_main.js and a whole load of tests.
API changes:
- setPromiseRejectCallback becomes setUnhandledPromiseRejectionHandler.
The function is now called from eventLoopTick.
- The promiseRejectMacrotaskCallback no longer exists, as this is
automatically handled in eventLoopTick.
- ops.op_dispatch_exception now takes a second parameter: in_promise.
The preferred way to call this op is now reportUnhandledException or
reportUnhandledPromiseRejection.
Switch `ext/fetch` over to `resourceForReadableStream` to simplify and
unify implementation with `ext/serve`. This allows us to work in Rust
with resources only.
Two additional changes made to `resourceForReadableStream` were
required:
- Add an optional length to `resourceForReadableStream` which translates
to `size_hint`
- Fix a bug where writing to a closed stream that was full would panic
This PR uses the new `cancel` method of `TransformStream` to properly
clean up the internal `TextDecoder` used in `TextDecoderStream` if the
stream is cancelled.
Fixes #13142
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This is the release commit being forwarded back to main for 1.38.1
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
Co-authored-by: littledivy <littledivy@users.noreply.github.com>
We can move all promise ID knowledge to deno_core, allowing us to better
experiment with promise implementation in deno_core.
`{un,}refOpPromise(promise)` is equivalent to
`{un,}refOp(promise[promiseIdSymbol])`
We can go one level down in abstraction and avoid using the public
`ReadableStream` APIs.
This patch ~5% perf boost on small ReadableStream:
```
Running 10s test @ http://localhost:8080/
2 threads and 10 connections
Thread Stats Avg Stdev Max +/- Stdev
Latency 148.32us 108.95us 3.88ms 95.71%
Req/Sec 33.24k 2.68k 37.94k 73.76%
668188 requests in 10.10s, 77.74MB read
Requests/sec: 66162.91
Transfer/sec: 7.70MB
```
main:
```
Running 10s test @ http://localhost:8080/
2 threads and 10 connections
Thread Stats Avg Stdev Max +/- Stdev
Latency 150.23us 67.61us 4.39ms 94.80%
Req/Sec 31.81k 1.55k 35.56k 83.17%
639078 requests in 10.10s, 74.36MB read
Requests/sec: 63273.72
Transfer/sec: 7.36MB
```
Fixes: #20569 by introducing a custom replacement for the tokio mpsc
channel that is byte-size backpressure-aware.
Using the testcase in the linked bug, we see all the small writes
aggregated into a single packet and HTTP frame.
```
10:39 $ nc localhost 8000
GET / HTTP/1.1
HTTP/1.1 200 OK
content-type: text/plain
vary: Accept-Encoding
transfer-encoding: chunked
date: Tue, 19 Sep 2023 16:39:13 GMT
A
0
1
2
3
4
```
This patch:
```
Running 10s test @ http://localhost:8080/
2 threads and 10 connections
Thread Stats Avg Stdev Max +/- Stdev
Latency 157.47us 194.89us 9.53ms 98.97%
Req/Sec 31.37k 1.56k 34.73k 85.15%
630407 requests in 10.10s, 73.35MB read
Requests/sec: 62428.12
Transfer/sec: 7.26MB
```
main:
```
Running 10s test @ http://localhost:8080/
2 threads and 10 connections
Thread Stats Avg Stdev Max +/- Stdev
Latency 343.75us 200.48us 10.41ms 98.25%
Req/Sec 14.64k 806.52 16.98k 84.65%
294018 requests in 10.10s, 39.82MB read
Requests/sec: 29109.91
Transfer/sec: 3.94MB
```
---------
Co-authored-by: Bert Belder <bertbelder@gmail.com>
Rewrites 3 ops that used "op(deferred)" to use "op2(async(lazy))"
instead.
This will allow us to remove codepath for handling "deferred" ops in
"deno_core".
<!--
Before submitting a PR, please read https://deno.com/manual/contributing
1. Give the PR a descriptive title.
Examples of good title:
- fix(std/http): Fix race condition in server
- docs(console): Update docstrings
- feat(doc): Handle nested reexports
Examples of bad title:
- fix #7123
- update docs
- fix bugs
2. Ensure there is a related issue and it is referenced in the PR text.
3. Ensure there are tests that cover the changes.
4. Ensure `cargo test` passes.
5. Ensure `./tools/format.js` passes without changing files.
6. Ensure `./tools/lint.js` passes.
7. Open as a draft PR if your work is still in progress. The CI won't
run
all steps, but you can add '[ci]' to a commit message to force it to.
8. If you would like to run the benchmarks on the CI, add the 'ci-bench'
label.
-->
As the title.
---------
Co-authored-by: Matt Mastracci <matthew@mastracci.com>
This PR ensures that the original signal event is fired before any
dependent signal events.
---
The enabled tests fail on `main`:
```
assert_array_equals: Abort events fired in correct order expected property 0 to be
"original-aborted" but got "clone-aborted" (expected array ["original-aborted", "clone-aborted"]
got ["clone-aborted", "original-aborted"])
```
This PR fixes some crashing WPT tests due to an unresolved promise.
---
This could be a [stream spec](https://streams.spec.whatwg.org) bug
When `controller.close` is called on a byob stream, there's no cleanup
of pending `readIntoRequests`. The only cleanup of pending
`readIntoRequests` happen when `.byobRequest.respond(0)` is called, it
happens
here:6ba245fe25/ext/web/06_streams.js (L2026)
which ends up calling `readIntoRequest.closeSteps(chunk);` in
6ba245fe25/ext/web/06_streams.js (L2070)
To reproduce:
```js
async function byobRead() {
const input = [new Uint8Array([8, 241, 48, 123, 151])];
const stream = new ReadableStream({
type: "bytes",
async pull(controller) {
if(input.length === 0) {
controller.close();
// controller.byobRequest.respond(0); // uncomment for fix
return
}
controller.enqueue(input.shift())
},
});
const reader = stream.getReader({ mode: 'byob' });
const r1 = await reader.read(new Uint8Array(64));
console.log(r1);
const r2 = await reader.read(new Uint8Array(64));
console.log(r2);
}
await byobRead();
```
Running the script triggers:
```
error: Top-level await promise never resolved
```
This addresses issue #19918.
## Issue description
Event messages have the wrong isTrusted value when they are not
triggered by user interaction, which differs from the browser. In
particular, all MessageEvents created by Deno have isTrusted set to
false, even though it should be true.
This is my first ever contribution to Deno, so I might be missing
something.
This PR changes Web IDL interfaces to be declared with `var` instead of
`class`, so that accessing them via `globalThis` does not raise type
errors.
Closes #13390.
…nclusion" (#19519)"
This reverts commit 28a4f3d0f5.
This change causes failures when used outside Deno repo:
```
============================================================
Deno has panicked. This is a bug in Deno. Please report this
at https://github.com/denoland/deno/issues/new.
If you can reliably reproduce this panic, include the
reproduction steps and re-run with the RUST_BACKTRACE=1 env
var set and include the backtrace in your report.
Platform: linux x86_64
Version: 1.34.3+b37b286
Args: ["/opt/hostedtoolcache/deno/0.0.0-b37b286f7fa68d5656f7c180f6127bdc38cf2cf5/x64/deno", "test", "--doc", "--unstable", "--allow-all", "--coverage=./cov"]
thread 'main' panicked at 'called `Result::unwrap()` on an `Err` value: Failed to read "/home/runner/work/deno/deno/core/00_primordials.js"
Caused by:
No such file or directory (os error 2)', core/runtime/jsruntime.rs:699:8
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
```
Relands #19463. This time the `ExtensionFileSourceCode` enum is
preserved, so this effectively just splits feature
`include_js_for_snapshotting` into `exclude_js_sources` and
`runtime_js_sources`, adds a `force_include_js_sources` option on
`extension!()`, and unifies `ext::Init_ops_and_esm()` and
`ext::init_ops()` into `ext::init()`.
The WHATWG DOM specification has corrected the spelling of "slotable" to
"slottable".[1] This commit aligns our implementation accordingly.
[1]: https://github.com/whatwg/dom/pull/845
`ZeroCopyBuf` was convenient to use, but sometimes it did hide details
that some copies were necessary in certain cases. Also it made it way to easy
for the caller to pass around and convert into different values. This commit
splits `ZeroCopyBuf` into `JsBuffer` (an array buffer coming from V8) and
`ToJsBuffer` (a Rust buffer that will be converted into a V8 array buffer).
As a result some magical conversions were removed (they were never used)
limiting the API surface and preparing for changes in #19534.
… (#19463)"
This reverts commit ceb03cfb03.
This is being reverted because it causes 3.5Mb increase in the binary
size,
due to runtime JS code being included in the binary, even though it's
already snapshotted.
CC @nayeemrmn
Remove `ExtensionFileSourceCode::LoadedFromFsDuringSnapshot` and feature
`include_js_for_snapshotting` since they leak paths that are only
applicable in this repo to embedders. Replace with feature
`exclude_js_sources`. Additionally the feature
`force_include_js_sources` allows negating it, if both features are set.
We need both of these because features are additive and there must be a
way of force including sources for snapshot creation while still having
the `exclude_js_sources` feature. `force_include_js_sources` is only set
for build deps, so sources are still excluded from the final binary.
You can also specify `force_include_js_sources` on any extension to
override the above features for that extension. Towards #19398.
But there was still the snapshot-from-snapshot situation where code
could be executed twice, I addressed that by making `mod_evaluate()` and
scripts like `core/01_core.js` behave idempotently. This allowed
unifying `ext::init_ops()` and `ext::init_ops_and_esm()` into
`ext::init()`.
Related issue: https://github.com/denoland/deno/issues/19358.
This is a regression that seems to have been introduced in
https://github.com/denoland/deno/pull/18905. It looks to have been a
performance optimization.
The issue is probably easiest described with some code:
```ts
const target = new EventTarget();
const event = new Event("foo");
target.addEventListener("foo", () => {
console.log('base');
target.addEventListener("foo", () => {
console.log('nested');
});
});
target.dispatchEvent(event);
```
Essentially, the second event listener is being attached while the `foo`
event is still being dispatched. It should then not fire that second
event listener, but Deno currently does.
This commit changes implementation of "setImmediate"
from "node:timers" module to 0ms timer that is never
clamped to 4ms no matter how many nested calls there are.
Closes https://github.com/denoland/deno/issues/19034
This commit changes the implementation of `ext/web` timers, by using
"op_void_async_deferred" for timeouts of 0ms.
0ms timeout is meant to be run at the end of the event loop tick and
currently Tokio timers that we use to back timeouts have at least 1ms
resolution. That means that 0ms timeout actually take >1ms. This
commit changes that and runs 0ms timeout at the end of the event
loop tick.
One consequence is that "unrefing" a 0ms timer will actually keep
the event loop alive (which I believe actually makes sense, the test
we had only worked because the timeout took more than 1ms).
Ref https://github.com/denoland/deno/issues/19034
**THIS PR HAS GIT CONFLICTS THAT MUST BE RESOLVED**
This is the release commit being forwarded back to main for 1.33.4
Please ensure:
- [x] Everything looks ok in the PR
- [ ] The release has been published
To make edits to this PR:
```shell
git fetch upstream forward_v1.33.4 && git checkout -b forward_v1.33.4 upstream/forward_v1.33.4
```
Don't need this PR? Close it.
cc @levex
Co-authored-by: levex <levex@users.noreply.github.com>
Co-authored-by: Levente Kurusa <lkurusa@kernelstuff.org>
If a timer is requested with <=100ms resolution, request the high-res
timer. Since the default Windows timer period is 15ms, this means a
100ms timer could fire at 115ms (15% late). We assume that timers longer
than 100ms are a reasonable cutoff here.
The high-res timers on Windows are still limited. Unfortuntely this
means that our shortest duration 4ms timers can still be 25% late, but
without a more complex timer system or spinning on the clock itself,
we're somewhat bounded by the OS' scheduler itself.
**THIS PR HAS GIT CONFLICTS THAT MUST BE RESOLVED**
This is the release commit being forwarded back to main for 1.33.3
Please ensure:
- [x] Everything looks ok in the PR
- [x] The release has been published
To make edits to this PR:
```shell
git fetch upstream forward_v1.33.3 && git checkout -b forward_v1.33.3 upstream/forward_v1.33.3
```
Don't need this PR? Close it.
cc @levex
Co-authored-by: Levente Kurusa <lkurusa@kernelstuff.org>
This now allows circular imports across extensions.
Instead of load + eval of all ESM files in declaration order, all files
are only loaded. Eval is done recursively by V8, only evaluating
files that are listed in `Extension::esm_entry_point` fields.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
**THIS PR HAS GIT CONFLICTS THAT MUST BE RESOLVED**
This is the release commit being forwarded back to main for 1.33.2
Please ensure:
- [x] Everything looks ok in the PR
- [x] The release has been published
To make edits to this PR:
```shell
git fetch upstream forward_v1.33.2 && git checkout -b forward_v1.33.2 upstream/forward_v1.33.2
```
Don't need this PR? Close it.
cc @levex
Co-authored-by: levex <levex@users.noreply.github.com>
Co-authored-by: Levente Kurusa <lkurusa@kernelstuff.org>
Migrates some of existing async ops to generated wrappers introduced in
https://github.com/denoland/deno/pull/18887. As a result "core.opAsync2"
was removed.
I will follow up with more PRs that migrate all the async ops to
generated wrappers.
- Do not use `ReflectHas` in `isNode`.
- Avoid copying handler array when handlers.length == 1
- Avoid searching for path target when path.length == 1
```
Linux divy-2 5.19.0-1022-gcp #24~22.04.1-Ubuntu SMP Sun Apr 23 09:51:08 UTC 2023 x86_64 x86_64 x86_64 GNU/Linux
32GiB System memory
Intel(R) Xeon(R) CPU @ 3.10GHz
# main + https://github.com/denoland/deno/pull/18904
Msg/sec: 89326.750000
Msg/sec: 90320.000000
Msg/sec: 89576.250000
# this patch
Msg/sec: 97250.000000
Msg/sec: 97125.500000
Msg/sec: 97964.500000
```
This should produce a little less garbage and using an object here
wasn't really required.
---------
Co-authored-by: Aapo Alasuutari <aapo.alasuutari@gmail.com>
Co-authored-by: Leo Kettmeir <crowlkats@toaxl.com>
This commit adds a new core API `opAsync2` to call an async op with
atmost 2 arguments. Spread argument iterators has a pretty big perf hit
when calling ops.
| name | avg msg/sec/core |
| --- | --- |
| 1.32.1 | `127820.750000` |
| #18506 | `140079.000000` |
| #18506 + #18509 | `150104.250000` |
| #18506 + #18509 + this | `157340.000000` |
Follow-up to #18210:
* we are passing the generated `cfg` object into the state function
rather than passing individual config fields
* reduce cloning dramatically by making the state_fn `FnOnce`
* `take` for `ExtensionBuilder` to avoid more unnecessary copies
* renamed `config` to `options`
This implements two macros to simplify extension registration and centralize a lot of the boilerplate as a base for future improvements:
* `deno_core::ops!` registers a block of `#[op]`s, optionally with type
parameters, useful for places where we share lists of ops
* `deno_core::extension!` is used to register an extension, and creates
two methods that can be used at runtime/snapshot generation time:
`init_ops` and `init_ops_and_esm`.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This commit splits "<ext_name>::init" functions into "init_ops" and
"init_ops_and_esm". That way we don't have to construct list of
ESM sources on each startup if we're running with a snapshot.
In a follow up commit "deno_core" will be changed to not have a split
between "extensions" and "extensions_with_js" - it will be embedders'
responsibility to pass appropriately configured extensions.
Prerequisite for https://github.com/denoland/deno/pull/18080
This commit changes how "unload" event is handled - before
this commit an event listener was added unconditionally in
the runtime bootstrapping function, which for some reason was
very expensive (0.3ms). Instead of adding an event listener,
a check was added to "dispatchEvent" function that performs
the same action (so it's only called if there's an event dispatched).
This commit renames "deno_core::InternalModuleLoader" to
"ExtModuleLoader" and changes the specifiers used by the
modules loaded from this loader to "ext:".
"internal:" scheme was really ambiguous and it's more characters than
"ext:", which should result in slightly smaller snapshot size.
Closes https://github.com/denoland/deno/issues/18020
There's no point for this API to expect result. If something fails it should
result in a panic during build time to signal to embedder that setup is
wrong.
This API is required by several extensions like "ext/node", "ext/ffi"
and also FS APIs that we want to move to a separate crate. Because
of that "pathFromURL" API was moved to "deno_web" extension so
other extension crates can rely on it.
Join two independent ops into one. A fast impl of one + a slow callback
of another. Here's an example showing optimized paths for latin-1 via
fast call and the next-best fallback using V8 apis.
```rust
#[op(v8)]
fn op_encoding_encode_into_fallback(
scope: &mut v8::HandleScope,
input: serde_v8::Value,
// ...
#[op(fast, slow = op_encoding_encode_into_fallback)]
fn op_encoding_encode_into(
input: Cow<'_, str>,
// ...
```
Benchmark results of the fallback path:
```
time target/release/deno run -A --unstable ./cli/tests/testdata/benches/text_encoder_into_perf.js
________________________________________________________
Executed in 70.90 millis fish external
usr time 57.76 millis 0.23 millis 57.53 millis
sys time 17.02 millis 1.28 millis 15.74 millis
target/release/deno_main run -A --unstable ./cli/tests/testdata/benches/text_encoder_into_perf.js
________________________________________________________
Executed in 154.00 millis fish external
usr time 67.14 millis 0.26 millis 66.88 millis
sys time 38.82 millis 1.47 millis 37.35 millis
```
This commit changes definition of "ExtensionFileSource", by changing
"code" field to being "ExtensionFileSourceCode" enum. Currently the enum
has only a single variant "IncludedInBinary". It is done in preparation
to allow embedders to decide if they want to include the source code in the
binary when snapshotting (in most cases they shouldn't do that).
In the follow up commit we'll add more variants to
"ExtensionFileSourceCode".
"include_js_files_dir!" macro was removed in favor "include_js_files!"
macro which can now accept "dir" option.
This commit moves "deno_std/node" in "ext/node" crate. The code is
transpiled and snapshotted during the build process.
During the first pass a minimal amount of work was done to create the
snapshot, a lot of code in "ext/node" depends on presence of "Deno"
global. This code will be gradually fixed in the follow up PRs to migrate
it to import relevant APIs from "internal:" modules.
Currently the code from snapshot is not used in any way, and all
Node/npm compatibility still uses code from
"https://deno.land/std/node" (or from the location specified by
"DENO_NODE_COMPAT_URL"). This will also be handled in a follow
up PRs.
---------
Co-authored-by: crowlkats <crowlkats@toaxl.com>
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
Co-authored-by: Yoshiya Hinosawa <stibium121@gmail.com>
This PR refactors all internal js files (except core) to be written as
ES modules.
`__bootstrap`has been mostly replaced with static imports in form in
`internal:[path to file from repo root]`.
To specify if files are ESM, an `esm` method has been added to
`Extension`, similar to the `js` method.
A new ModuleLoader called `InternalModuleLoader` has been added to
enable the loading of internal specifiers, which is used in all
situations except when a snapshot is only loaded, and not a new one is
created from it.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
