This commit updates Deno to use `reqwest` at 0.12.4
and `rustls` at 0.22. Other related crates were updated
as well to match versions accepted by `reqwest` and `rustls`.
Note: we are not using the latest available `rustls` yet,
but this upgrade was non-trivial already, so a bump to
0.23 for `rustls` will be done in a separate commit.
Closes #23370
---------
Signed-off-by: Ryan Dahl <ry@tinyclouds.org>
Signed-off-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Co-authored-by: Ryan Dahl <ry@tinyclouds.org>
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
Previously res.setHeader("foo", ["bar", "baz"]) added a single header
with a value of `bar,baz`. Really this should add two separate headers.
This is visible in `set-cookie` for example.
Previously various reads of files in `node_modules` would error on
invalid UTF-8. These were cases involving:
- reading package.json from Rust
- reading package.json from JS
- reading CommonJS files from JS
- reading CommonJS files from Rust (for ESM translation)
- reading ESM files from Rust
Also removes permissions being passed in for node resolution. It was
completely useless because we only checked it for reading package.json
files, but Deno reading package.json files for resolution is perfectly
fine.
My guess is this is also a perf improvement because Deno is doing less
work.
This is the release commit being forwarded back to main for 1.44.1
Co-authored-by: devsnek <devsnek@users.noreply.github.com>
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
This commits adds the ability to set a would-be exit code
for the Deno process without forcing an immediate exit,
through the new `Deno.exitCode` API.
- **Implements `Deno.exitCode` getter and setter**: Adds support for
setting
and retrieving a would-be exit code via `Deno.exitCode`.
This allows for asynchronous cleanup before process termination
without immediately exiting.
- **Ensures type safety**: The setter for `Deno.exitCode` validates that
the provided value is a number, throwing a TypeError if not, to ensure
that
only valid exit codes are set.
Closes to #23605
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This commit changes `gzip` compression in `Deno.serve` API to flush data
after each write. There's a slight performance regression, but provided
test shows a scenario that was not possible before.
---------
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
We didn't honour the `position` options of `fd.read` and `fd.write`
because we checked if the buffer is of type `Buffer` instead of just
`Uint8Array`. Node does the latter. In doing so I noticed that the file
handle id was written to a public property which it definitely shouldn't
be. This was probably a typo.
Fixes https://github.com/denoland/deno/issues/23707
We didn't support the `throwIfNoEntry` option for Node's `fs.lstatSync`
method. Note that the async variant doesn't have this option.
Fixes https://github.com/denoland/deno/issues/23996
Node sets the default HTTP response status code to 200 on the
`ServerResponse`. We initialised it as `undefined` before which caused a
problem with 11ty's dev server.
Thanks to @vrugtehagel for reporting this issue and finding the correct
fix as well 🎉
Fixes https://github.com/denoland/deno/issues/23970
The flag lets us exit from read loop without throwing an error when
the stream is cancelled.
This fixes gRPC cancellation example.
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This stubs `findSourceMap` in `node:module` by always returning
`undefined` as if it never found a source map. This unblocks the `ava`
test runner.
Fixes https://github.com/denoland/deno/issues/18666
Some npm libraries like `signal-exit` rely on the length of the listener
array returned by `process.listeners("SIGNT")` to be correct to
function. We weren't tracking `SIG*` events there, which broke those npm
libraries.
Fixes https://github.com/denoland/deno/issues/22892
the last commit had a regression, where it removed this branch, I
haven't tested the code but I think it should work
---------
Signed-off-by: Bedis Nbiba <bedisnbiba@gmail.com>
Popular test runners like Jest instantiate a new `Process` object
themselves and expect the class constructor to be callable without the
`new` keyword. This PR refactors our `Process` class implementation from
a proper ES2015 class to an ES5-style class which can be invoked both
with and without the `new` keyword like in Node.
Fixes https://github.com/denoland/deno/issues/23863
gRPC depends only on the END_STREAM flag to emit "trailers" event which
is responsible to propagate the errors correctly. This patch uses
Body::is_end_stream() to determine if a stream will end and set the
END_STREAM flag.
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
<!--
Before submitting a PR, please read
https://docs.deno.com/runtime/manual/references/contributing
1. Give the PR a descriptive title.
Examples of good title:
- fix(std/http): Fix race condition in server
- docs(console): Update docstrings
- feat(doc): Handle nested reexports
Examples of bad title:
- fix #7123
- update docs
- fix bugs
2. Ensure there is a related issue and it is referenced in the PR text.
3. Ensure there are tests that cover the changes.
4. Ensure `cargo test` passes.
5. Ensure `./tools/format.js` passes without changing files.
6. Ensure `./tools/lint.js` passes.
7. Open as a draft PR if your work is still in progress. The CI won't
run
all steps, but you can add '[ci]' to a commit message to force it to.
8. If you would like to run the benchmarks on the CI, add the 'ci-bench'
label.
-->
Fixes https://github.com/denoland/deno/issues/23801
---------
Signed-off-by: Marvin Hagemeister <marvinhagemeister50@gmail.com>
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
<!--
Before submitting a PR, please read
https://docs.deno.com/runtime/manual/references/contributing
1. Give the PR a descriptive title.
Examples of good title:
- fix(std/http): Fix race condition in server
- docs(console): Update docstrings
- feat(doc): Handle nested reexports
Examples of bad title:
- fix #7123
- update docs
- fix bugs
2. Ensure there is a related issue and it is referenced in the PR text.
3. Ensure there are tests that cover the changes.
4. Ensure `cargo test` passes.
5. Ensure `./tools/format.js` passes without changing files.
6. Ensure `./tools/lint.js` passes.
7. Open as a draft PR if your work is still in progress. The CI won't
run
all steps, but you can add '[ci]' to a commit message to force it to.
8. If you would like to run the benchmarks on the CI, add the 'ci-bench'
label.
-->
Fixes https://github.com/denoland/deno/issues/23397
**THIS PR HAS GIT CONFLICTS THAT MUST BE RESOLVED**
This is the release commit being forwarded back to main for 1.43.2
Please ensure:
- [x] Everything looks ok in the PR
- [x] The release has been published
To make edits to this PR:
```shell
git fetch upstream forward_v1.43.2 && git checkout -b forward_v1.43.2 upstream/forward_v1.43.2
```
Don't need this PR? Close it.
cc @nathanwhit
Co-authored-by: nathanwhit <nathanwhit@users.noreply.github.com>
Co-authored-by: Nathan Whitaker <nathan@deno.com>
Part of #22607 (probably closes it, but I haven't done thorough testing)
Makes it so that `require.resolve` with `paths` specified will fallback
to using the global cache when the paths can't be found when using a
global cache (not when using a node_modules folder)
This PR adds private `[REF]()` and `[UNREF]()` methods to Stdin class,
and call them from Node.js polyfill layer (`TTY` class). This enables
`process.stdin.unref()` and `process.stdin.ref()` for the case when
stdin is terminal.
closes #21796
When the response has been successfully send, we abort the
`Request.signal` property to indicate that all resources associated with
this transaction may be torn down.
Most common argument to `env` option for `worker_threads.Worker` will be
`process.env`.
In Deno `process.env` is a `Proxy` which can't be cloned using
structured clone algorithm.
So to be safe, I'm creating a copy of actual object before it's sent to
the worker thread.
Ref #23522
Embedders may have special requirements around file opening, so we add a
new `check_open` permission check that is called as part of the file
open process.
Landing work from #21903, plus fixing a node compat bug.
We were always sending the HTTP/2 ALPN on TLS connections which might
confuse upstream servers.
Changes:
- Configure HTTP/2 ALPN when making the TLS connection from the HTTP/2
code
- Read the `ALPNProtocols` property from the TLS connection options
rather than the deno `alpnProtocols` field
- Add tests
Prereq for landing Deno.serveHttp on Deno.serve: removing older HTTP
servers from the codebase.
Closes https://github.com/denoland/deno/issues/23362
Previously we were panicking if there was a pending read on a
port and `receiveMessageOnPort` was called. This is now fixed
by cancelling the pending read, trying to read a message and
resuming reading in a loop.
This PR follows this fix (https://github.com/nodejs/node/pull/52005) in
Node.js.
Stream's construct callback happens one tick earlier by this change, and
it prevents the reordering of the first few chunks in
`node:stream.Writable`
closes #20284
MessagePort if directly assigned to workerData property instead of
embedding it in an object then it is not patched to a NodeMessagePort.
This commit fixes the bug.
Fixes #23179.
Fixes #22454.
Enables passing `{tokens: true}` to `parseArgs` and setting default
values for options.
With this PR, the observable framework works with deno out of the box
(no unstable flags needed).
The existing code was basically copied straight from node, so this PR
mostly just updates that (out of date) vendored code. Also fixes some
issues with error exports (before this PR, in certain error cases we
were attempting to construct error classes that weren't actually in
scope).
The last change (in the second commit) adds a small hack so that we
actually exercise the `test-parse-args.js` node_compat test, previously
it was reported as passing though it should have failed. That test now
passes.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
The `tools/node_compat/node` submodule has been moved to
`tests/node_compat/runner/suite` and the remaining files within
`tools/node_compat` to `tests/node_compat/runner`.
Most of the changes are of the header within `tests/node_compat/test`
files. The `setup` and `test` tasks within `tests/node_comapt` execute
successfully.
Towards #22525
CC @mmastrac
Was doing a bit of debugging on why some stuff is not working in a
personal project and ran a quick debug profile and saw it cloning the
pkg json a lot. We should put this in an Rc.
Slightly different approach to similar changes in #22386
Note that this doesn't use a warmup script -- we are actually just doing
more work at snapshot time.
Fixes #22158.
Basically reimplements the whole `StringDecoder` with a much more direct
translation (read like one-to-one) of node's current logic. The old
implementation was closer to node's super old impl and it was too hard
to keep the code structure while matching the behavior of their new
logic.
This adds support for UTF-16LE, ascii, and latin1.
This also enables the node_compat test, which now passes without
modification.
Fixes https://github.com/denoland/deno/issues/18972
Support for web-push VAPID keys & jws signing
- Fixes EC keygen to return raw private key and uncompressed public key
point.
- Support for `EC PRIVATE KEY`
Stub implementation of getCipherInfo(). Good enough for most cases.
Note: We do not support all OpenSSL ciphers (likely never will)
Fixes https://github.com/denoland/deno/issues/21805
Fixes #19214.
We were using the `idna` crate to implement our polyfill for
`punycode.toASCII` and `punycode.toUnicode`. The `idna` crate is
correct, and adheres to the IDNA2003/2008 spec, but it turns out
`node`'s implementations don't really follow any spec! Instead, node
splits the domain by `'.'` and punycode encodes/decodes each part. This
means that node's implementations will happily work on codepoints that
are disallowed by the IDNA specs, causing the error in #19214.
While fixing this, I went ahead and matched the node behavior on all of
the punycode functions and enabled node's punycode test in our
`node_compat` suite.
This commit fixes race condition in "node:worker_threads" module were
the first message did a setup of "threadId", "workerData" and
"environmentData".
Now this data is passed explicitly during workers creation and is set up
before any user code is executed.
Closes https://github.com/denoland/deno/issues/22783
Closes https://github.com/denoland/deno/issues/22672
---------
Co-authored-by: Satya Rohith <me@satyarohith.com>
Modify `_http_outgoing.ts` to support the extended signature of
`validateHeaderName()` used since node v19.5.0/v18.14.0 by adding the
`label` parameter. (see:
https://nodejs.org/api/http.html#httpvalidateheadernamename-label)
Making both validation functions accessible as public exports of
`node:http`
Fixes: #22614
Fixes #21660
Adds a basic `Immediate` class to mirror `NodeJS.Immediate`, and changes
`setImmediate` and `clearImmediate` to return and accept (respectively)
`Immediate` objects.
Note that for now {ref,unref,hasRef} are effectively stubs, as deno_core
doesn't really natively support immediates (they're currently modeled as
timers with delay of 0). Eventually we probably want to actually
implement these properly.
This commit changes how we figure out if we're running on main
thread in `node:worker_threads` module. Instead of relying on quirky
"magic variable" for a name to check if we're on main thread, we are
now explicitly passing this information during bootstrapping of the
runtime. As a side effect, `WorkerOptions.name` is more useful
and matches what Node.js does more closely (though not fully).
Towards https://github.com/denoland/deno/issues/22783
This is the release commit being forwarded back to main for 1.41.2
Signed-off-by: Divy Srivastava <dj.srivastava23@gmail.com>
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
<!--
Before submitting a PR, please read
https://docs.deno.com/runtime/manual/references/contributing
1. Give the PR a descriptive title.
Examples of good title:
- fix(std/http): Fix race condition in server
- docs(console): Update docstrings
- feat(doc): Handle nested reexports
Examples of bad title:
- fix #7123
- update docs
- fix bugs
2. Ensure there is a related issue and it is referenced in the PR text.
3. Ensure there are tests that cover the changes.
4. Ensure `cargo test` passes.
5. Ensure `./tools/format.js` passes without changing files.
6. Ensure `./tools/lint.js` passes.
7. Open as a draft PR if your work is still in progress. The CI won't
run
all steps, but you can add '[ci]' to a commit message to force it to.
8. If you would like to run the benchmarks on the CI, add the 'ci-bench'
label.
-->
Fixes https://github.com/denoland/deno/issues/18127https://github.com/denoland/deno/issues/17248
SvelteKit works now!
```
$ deno run -A npm:create-svelte@latest my-app
create-svelte version 6.0.9
┌ Welcome to SvelteKit!
│
◇ Which Svelte app template?
│ SvelteKit demo app
│
◇ Add type checking with TypeScript?
│ Yes, using JavaScript with JSDoc comments
│
◇ Select additional options (use arrow keys/space bar)
│ none
│
└ Your project is ready!
✔ Type-checked JavaScript
https://www.typescriptlang.org/tsconfig#checkJs
Install community-maintained integrations:
https://github.com/svelte-add/svelte-add
Next steps:
1: cd my-app
2: npm install
3: git init && git add -A && git commit -m "Initial commit" (optional)
4: npm run dev -- --open
To close the dev server, hit Ctrl-C
Stuck? Visit us at https://svelte.dev/chat
$ cd my-app/
$ deno task dev
Task dev vite dev
VITE v5.1.4 ready in 1632 ms
➜ Local: http://localhost:5173/
➜ Network: use --host to expose
➜ press h + enter to show help
```
<!--
Before submitting a PR, please read
https://docs.deno.com/runtime/manual/references/contributing
1. Give the PR a descriptive title.
Examples of good title:
- fix(std/http): Fix race condition in server
- docs(console): Update docstrings
- feat(doc): Handle nested reexports
Examples of bad title:
- fix #7123
- update docs
- fix bugs
2. Ensure there is a related issue and it is referenced in the PR text.
3. Ensure there are tests that cover the changes.
4. Ensure `cargo test` passes.
5. Ensure `./tools/format.js` passes without changing files.
6. Ensure `./tools/lint.js` passes.
7. Open as a draft PR if your work is still in progress. The CI won't
run
all steps, but you can add '[ci]' to a commit message to force it to.
8. If you would like to run the benchmarks on the CI, add the 'ci-bench'
label.
-->
The issue seems to be already fixed since we upped to a newer 18.x
version string in [another
PR](https://github.com/denoland/deno/pull/20366). Updating to latest
node LTS version can't hurt though.
Fixes https://github.com/denoland/deno/issues/21515
Improves #19100
Fixes #20356
Replaces #20428
Changes made in deno_core to support this:
- [x] Errors must be handled in setTimeout callbacks
- [x] Microtask ordering is not-quite-right
- [x] Timer cancellation must be checked right before dispatch
- [x] Timer sanitizer
- [x] Move high-res timer to deno_core
- [x] Timers need opcall tracing
fixes #22627
This PR fixes a node compat issue that is preventing `serverless-http`
and `serverless-express` npm modules from working with Deno. These
modules are useful for running apps on AWS Lambda (and other serverless
infra).
---------
Signed-off-by: Igor Zinkovsky <igor@deno.com>
Migrations:
- Error registration no longer required for Interrupted or BadResource
(these are core exception)
- `include_js_files!`/`ExtensionFileSource` changes
This commit adds `ppid` getter for `node:process` to improve Node
compatibility one step further.
There is one problem though, which is that `Deno.ppid`, which
`process.ppid` internally calls, is actually of type `bigint` although
it's supposed to be `number`. I filed an issue for this (#22166). For
the time being, explciit type conversion from `bigint` to `number` is
applied to match the Node.js behavior.
Fixes https://github.com/denoland/deno/issues/22180
Matches the Node.js implementation more closely. Removed types, they do
not help just make it harder to debug with stack traces.
Follow up to #22157.
This leaves us with 4 usages of `ensureFastOps()` in `deno` itself.
There's also about 150 usages of `Deno.core.ops.<op_name>` left as well.
For removal in Deno v2. There are two issues:
1. Any script being run causes the output of `warnOnDeprecatedApi()` to
be printed, even when none of the `rid` properties are called.
2. `.rid` of these classes is used in multiple tests. I'm not sure how
to account for that. I thought of having `STDIN_RID`, and friends,
constants, whose values can be shared between the tests and the classes
themselves. Should we go with that or do something else?
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This change:
1. Implements `Deno.FsFile.sync()` and `Deno.FsFile.syncSync()`.
2. Deprecates `Deno.fsync()` and `Deno.fsyncSync()` for removal in Deno
v2, in favour of the above corresponding methods.
Related #21995
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This change:
1. Implements `Deno.FsFile.dataSync()` and `Deno.FsFile.dataSyncSync()`.
2. Deprecates `Deno.fdatasync()` and `Deno.fdatasyncSync()` for removal
in Deno v2, in favour of the above corresponding methods.
3. Replaces use of `Deno.fdatasync()` and `Deno.fdatasyncSync()` with
the above instance methods.
Related #21995
Most uses of `Deno.resources()` within tests, as they previously checked
for leaked resources. This is not needed as the test runner does this
automatically. Other internal uses of this API have been replaced with
the internal `Deno[Deno.internal].core.resources()`.
This change:
1. Implements `Deno.stdin.isTerminal()`, `Deno.stdout.isTerminal()` and
`Deno.stderr.isTerminal()`.
2. Deprecates `Deno.isatty()` for removal in Deno v2, in favour of the
above instance methods.
3. Replaces use of `Deno.isatty()` with the above instance methods.
Related #21995
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
This commit deprecates "--unstable" flag.
When "--unstable" flag is encountered a warning like this is printed:
```
The `--unstable` flag is deprecated, use granular `--unstable-*` flags instead.
Learn more at: https://docs.deno.com/runtime/manual/tools/unstable_flags
```
When "--unstable" flag is used and an unstable API is called an
additional warning like this is printed for each API call:
```
The `Deno.dlopen` API was used with `--unstable` flag. The `--unstable` flag is deprecated, use granular `--unstable-ffi` instead.
Learn more at: https://docs.deno.com/runtime/manual/tools/unstable_flags
```
When no "--unstable-*" flag is provided and an unstable API is called
following
warning is issued before exiting:
```
Unstable API 'Deno.dlopen'. The `--unstable-ffi` flag must be provided.
```
---------
Signed-off-by: Divy Srivastava <dj.srivastava23@gmail.com>
Signed-off-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
Co-authored-by: Asher Gomez <ashersaupingomez@gmail.com>
<!--
Before submitting a PR, please read https://deno.com/manual/contributing
1. Give the PR a descriptive title.
Examples of good title:
- fix(std/http): Fix race condition in server
- docs(console): Update docstrings
- feat(doc): Handle nested reexports
Examples of bad title:
- fix #7123
- update docs
- fix bugs
2. Ensure there is a related issue and it is referenced in the PR text.
3. Ensure there are tests that cover the changes.
4. Ensure `cargo test` passes.
5. Ensure `./tools/format.js` passes without changing files.
6. Ensure `./tools/lint.js` passes.
7. Open as a draft PR if your work is still in progress. The CI won't
run
all steps, but you can add '[ci]' to a commit message to force it to.
8. If you would like to run the benchmarks on the CI, add the 'ci-bench'
label.
-->
We were missing the `constants` export in the promise `fs` API which is
available in node.
```ts
import { constants, promises } from "node:fs";
import { constants as fsPromiseConstants } from "node:fs/promises";
console.log(constants === promises.constants); // logs: true
console.log(constants === fsPromiseConstants); // logs: true
```
Fixes https://github.com/denoland/deno/issues/21994
Introduces the first cppgc backed Resource into Deno.
This fixes the memory leak when using `X509Certificate`
**Comparison**:
```js
import { X509Certificate } from 'node:crypto';
const r = Deno.readFileSync('cli/tests/node_compat/test/fixtures/keys/agent1-cert.pem');
setInterval(() => {
for (let i = 0; i < 10000; i++) {
const cert = new X509Certificate(r);
}
}, 1000);
```
Memory usage after 5 secs
`main`: 1692MB
`cppgc`: peaks at 400MB
<!--
Before submitting a PR, please read https://deno.com/manual/contributing
1. Give the PR a descriptive title.
Examples of good title:
- fix(std/http): Fix race condition in server
- docs(console): Update docstrings
- feat(doc): Handle nested reexports
Examples of bad title:
- fix #7123
- update docs
- fix bugs
2. Ensure there is a related issue and it is referenced in the PR text.
3. Ensure there are tests that cover the changes.
4. Ensure `cargo test` passes.
5. Ensure `./tools/format.js` passes without changing files.
6. Ensure `./tools/lint.js` passes.
7. Open as a draft PR if your work is still in progress. The CI won't
run
all steps, but you can add '[ci]' to a commit message to force it to.
8. If you would like to run the benchmarks on the CI, add the 'ci-bench'
label.
-->
Ultimately, it came down to using incorrect property names in the
`FakeSocket` constructor. The values are passed under `remoteAddress`,
not `hostname` and `remotePort` instead of `port`.
Fixes https://github.com/denoland/deno/issues/21980
This commit adds support for "rejectionhandled" Web Event and
"rejectionHandled" Node event.
```js
import process from "node:process";
process.on("rejectionHandled", (promise) => {
console.log("rejectionHandled", reason, promise);
});
window.addEventListener("rejectionhandled", (event) => {
console.log("rejectionhandled", event.reason, event.promise);
});
```
---------
Co-authored-by: Matt Mastracci <matthew@mastracci.com>
<!--
Before submitting a PR, please read https://deno.com/manual/contributing
1. Give the PR a descriptive title.
Examples of good title:
- fix(std/http): Fix race condition in server
- docs(console): Update docstrings
- feat(doc): Handle nested reexports
Examples of bad title:
- fix #7123
- update docs
- fix bugs
2. Ensure there is a related issue and it is referenced in the PR text.
3. Ensure there are tests that cover the changes.
4. Ensure `cargo test` passes.
5. Ensure `./tools/format.js` passes without changing files.
6. Ensure `./tools/lint.js` passes.
7. Open as a draft PR if your work is still in progress. The CI won't
run
all steps, but you can add '[ci]' to a commit message to force it to.
8. If you would like to run the benchmarks on the CI, add the 'ci-bench'
label.
-->
---------
Signed-off-by: Matt Mastracci <matthew@mastracci.com>
Co-authored-by: Matt Mastracci <matthew@mastracci.com>
<!--
Before submitting a PR, please read https://deno.com/manual/contributing
1. Give the PR a descriptive title.
Examples of good title:
- fix(std/http): Fix race condition in server
- docs(console): Update docstrings
- feat(doc): Handle nested reexports
Examples of bad title:
- fix #7123
- update docs
- fix bugs
2. Ensure there is a related issue and it is referenced in the PR text.
3. Ensure there are tests that cover the changes.
4. Ensure `cargo test` passes.
5. Ensure `./tools/format.js` passes without changing files.
6. Ensure `./tools/lint.js` passes.
7. Open as a draft PR if your work is still in progress. The CI won't
run
all steps, but you can add '[ci]' to a commit message to force it to.
8. If you would like to run the benchmarks on the CI, add the 'ci-bench'
label.
-->
Fixes https://github.com/denoland/deno/issues/21836
Fixes #20516
Follow up to #21747 and #21746
This tackles the last point of #20516 where certain inputs weren't
accepted in the other zlib methods
This adds the `toU8` conversion of `_brotli` to `_zlib.mjs`, when we
create the ZLibBuffer, we'll sanitize the input. I noticed that the
async had no handler for `string` input so I added that as well.
Fixes https://github.com/denoland/deno/issues/21734
Changes:
- Use default encode when options do not provide a encode callback.
- Remove internal TS for `node:querystring`. Its not helping catching
bugs like this because of invalid type assumptions and use of `any`,
more of a maintenance burden.
This fixes point 3 of https://github.com/denoland/deno/issues/20516
This PR creates consistency between the sync and async versions of the
brotli compress where we will always return a buffer like Node.
This fixes point 2 of #20516
This adds a conversion from Dataview/Buffer by returning `obj.buffer`
which can be converted to a `UInt8Array`.
Question: Regarding point 4 of the mentioned issue would it be
appropriate to copy the toU8 helper to the `zlib.mjs` methods?
Main change is that:
- "hyper" has been renamed to "hyper_v014" to signal that it's legacy
- "hyper1" has been renamed to "hyper" and should be the default
`opAsync` requires a lookup by name on each async call. This is a
mechanical translation of all opAsync calls to ensureFastOps.
The `opAsync` API on Deno.core will be removed at a later time.
Node HTTP/2 was using the default h2 `Bytes` datatype when we can be
making using of `BufView` like we do in `Deno.serve`.
`fetch` and `Deno.serverHttp` can't make use of `BufView` because they
are using `reqwest` which is stuck on hyper 0.x at this time.
This PR implements the child_process IPC pipe between parent and child.
The implementation uses Windows named pipes created by parent and passes
the inheritable file handle to the child.
I've also replace parts of the initial implementation which passed the
raw parent fd to JS with resource ids instead. This way no file handle
is exposed to the JS land (both parent and child).
`IpcJsonStreamResource` can stream upto 800MB/s of JSON data on Win 11
AMD Ryzen 7 16GB (without `memchr` vectorization)
Bumped versions for 1.39.0
Please ensure:
- [x] Target branch is correct (`vX.XX` if a patch release, `main` if
minor)
- [x] Crate versions are bumped correctly
- [x] deno_std version is incremented in the code (see
`cli/deno_std.rs`)
- [x] Releases.md is updated correctly (think relevancy and remove
reverts)
To make edits to this PR:
```shell
git fetch upstream release_1_39.0 && git checkout -b release_1_39.0 upstream/release_1_39.0
```
cc @mmastrac
---------
Co-authored-by: mmastrac <mmastrac@users.noreply.github.com>
Co-authored-by: Matt Mastracci <matthew@mastracci.com>
This PR implements the Node child_process IPC functionality in Deno on
Unix systems.
For `fd > 2` a duplex unix pipe is set up between the parent and child
processes. Currently implements data passing via the channel in the JSON
serialization format.
This problem occurred trying to load tensorflow.js
```
> import * as tf from 'npm:@tensorflow/tfjs';
Uncaught SyntaxError: Identifier 'mod' has already been declared at file:///Users/ry/Library/Caches/deno/npm/registry.npmjs.org/@tensorflow/tfjs/4.14.0/dist/tf.node.js:167:14
at async <anonymous>:1:33
```
This commit adds a no-op flushHeaders method to the ServerResponse
object. It is a nop because the ServerResponse implementation is based
on top of the Deno server API instead of the Node `OutgoingMessage`
base.
Fixes #21509
This PR is an attempt to fix
https://github.com/denoland/deno/issues/20293, in which node modules
connecting to databases fail due to TLS errors. I ran into this
attempting to use
[node-postgres](https://github.com/brianc/node-postgres) to connect to a
[Neon](https://neon.tech) database.
Investigating via `--inspect-brk` led me to notice that the hostname
eventually passed to `Deno.startTls` was null. The hostname is
determined by the following code:
f6b889b432/ext/node/polyfills/_tls_wrap.ts (L87-L89)
This logic doesn't appear to be correct. I couldn't find reference to
`servername` existing on the `secureContext` in either Node's or Deno's
docs. There's a lot of scope here, and it's my first time reading
through this code, so I could be missing something!
Node uses [the following
logic](2e458d9736/lib/_tls_wrap.js (L1679-L1682)
) to determine the hostname for certificate validation:
```
const hostname = options.servername ||
options.host ||
(options.socket && options.socket._host) ||
'localhost';
```
This PR updates the `TLSSocket` polyfill to use behave similarly (though
I omitted the default to `localhost` at the end; I'm not sure if
including it is necessary or correct). With this change, `node-postgres`
connects to my TLS endpoint successfully (aside: Neon requires SNI,
which also works as expected).
---
I tried to update the tests in
https://github.com/denoland/deno/blob/main/cli/tests/unit_node/tls_test.ts
to exercise this change, but the test fails for me on `main` on Linux. I
investigated briefly and noticed that the test fixture
`cli/tests/testdata/tls/localhost.crt` doesn't appear to include the
`subjectAltName` specified in `domains.txt`. I believe the certificate
isn't matching `localhost`, but that's where I ended investigating.
This commit refactors how we access "core", "internals" and
"primordials" objects coming from `deno_core`, in our internal JavaScript code.
Instead of capturing them from "globalThis.__bootstrap" namespace, we
import them from recently added "ext:core/mod.js" file.
Add support for signing with a RSA PEM private key: `pkcs8` and `pkcs1`.
Fixes https://github.com/denoland/deno/issues/18972
Ref #21124
Verified fix with `npm:sshpk`. Unverfied but fixes
`npm:google-auth-library`, `npm:web-push` & `oracle/oci-typescript-sdk`
---------
Signed-off-by: Divy Srivastava <dj.srivastava23@gmail.com>
Switch `ext/fetch` over to `resourceForReadableStream` to simplify and
unify implementation with `ext/serve`. This allows us to work in Rust
with resources only.
Two additional changes made to `resourceForReadableStream` were
required:
- Add an optional length to `resourceForReadableStream` which translates
to `size_hint`
- Fix a bug where writing to a closed stream that was full would panic
We only want one zlib dependency.
Zlib dependencies are reorganized so they use a hidden
`__vendored_zlib_ng` flag in cli that enables zlib-ng for both libz-sys
(used by ext/node) and flate2 (used by deno_web).
This is the release commit being forwarded back to main for 1.38.1
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
Co-authored-by: littledivy <littledivy@users.noreply.github.com>
We can move all promise ID knowledge to deno_core, allowing us to better
experiment with promise implementation in deno_core.
`{un,}refOpPromise(promise)` is equivalent to
`{un,}refOp(promise[promiseIdSymbol])`
Towards #20996
`deno_whoami` is lightweight on unix and has zero framework dependency
on macOS. https://github.com/denoland/deno_whoami
---------
Signed-off-by: Divy Srivastava <dj.srivastava23@gmail.com>
Workaround the circular references issue by using a initializer function
to give tty stream class to `initStdin`.
Fixes https://github.com/denoland/deno/issues/21024
Fixes https://github.com/denoland/deno/issues/20611
Fixes https://github.com/denoland/deno/issues/20890
Fixes https://github.com/denoland/deno/issues/20336
`create-svelte` works now:
```
divy@mini /t/a> ~/gh/deno/target/debug/deno run -A --unstable --reload npm:create-svelte@latest sveltekit-deno
create-svelte version 5.1.1
┌ Welcome to SvelteKit!
│
◇ Which Svelte app template?
│ Skeleton project
│
◇ Add type checking with TypeScript?
│ Yes, using JavaScript with JSDoc comments
│
◇ Select additional options (use arrow keys/space bar)
│ none
│
└ Your project is ready!
✔ Type-checked JavaScript
https://www.typescriptlang.org/tsconfig#checkJs
Install community-maintained integrations:
https://github.com/svelte-add/svelte-add
Next steps:
1: cd sveltekit-deno
2: npm install
3: git init && git add -A && git commit -m "Initial commit" (optional)
4: npm run dev -- --open
To close the dev server, hit Ctrl-C
Stuck? Visit us at https://svelte.dev/chat
```
---------
Signed-off-by: Divy Srivastava <dj.srivastava23@gmail.com>
This commit improves "node:http2" module implementation, by enabling
to use "options.createConnection" callback when starting an HTTP2
session.
This change enables to pass basic client-side test with "grpc-js/grpc"
package.
Smaller fixes like "Http2Session.unref()" and "Http2Session.setTimeout()"
were handled as well.
Fixes #16647
For the following example, if I set the encoding to `base64url`, it'll
throw an unexpected TypeError:
```ts
import { Buffer } from "node:buffer";
Buffer.from("IntcImhlbGxvXCI6XCJoZGQvZStpXCJ9Ig", "base64url").toString();
// error: Uncaught TypeError: src.subarray is not a function
// const buf = Buffer.from(
// ^
// at blitBuffer (ext:deno_node/internal/buffer.mjs:1779:15)
// at Uint8Array.base64urlWrite (ext:deno_node/internal/buffer.mjs:691:10)
// at Object.write (ext:deno_node/internal/buffer.mjs:2195:11)
// at Uint8Array.write (ext:deno_node/internal/buffer.mjs:794:14)
// at fromString (ext:deno_node/internal/buffer.mjs:214:22)
// at _from (ext:deno_node/internal/buffer.mjs:119:12)
// at Function.from (ext:deno_node/internal/buffer.mjs:157:10)
// at file:///Users/foodieats/temp/buffer1.ts:3:20
```
The error caused by `base64urlWrite` function, it should call
`forgivingBase64UrlDecode` not `forgivingBase64UrlEncode`
Also fixed #20563 .
This commit adds "deno jupyter" subcommand which
provides a Deno kernel for Jupyter notebooks.
The implementation is mostly based on Deno's REPL and
reuses large parts of it (though there's some clean up that
needs to happen in follow up PRs). Not all functionality of
Jupyter kernel is implemented and some message type
are still not implemented (eg. "inspect_request") but
the kernel is fully working and provides all the capatibilities
that the Deno REPL has; including TypeScript transpilation
and npm packages support.
Closes https://github.com/denoland/deno/issues/13016
---------
Co-authored-by: Adam Powers <apowers@ato.ms>
Co-authored-by: Kyle Kelley <rgbkrk@gmail.com>
This commit improves compatibility of "node:http2" module by polyfilling
"connect" method and "ClientHttp2Session" class. Basic operations like
streaming, header and trailer handling are working correctly.
Refing/unrefing is still a TODO and "npm:grpc-js/grpc" is not yet working
correctly.
---------
Co-authored-by: Matt Mastracci <matthew@mastracci.com>
Fixes https://github.com/denoland/deno/issues/19816
In that issue, I suggest switching over the other brotli functionality
to the Rust API provided by the `brotli` crate. Here, I only do that
with the `brotli_decompress` function to fix the bug with buffers longer
than 4096 bytes.
