This allows using npm deps of jsr deps without having to add them to the
root package.json.
Works by taking the package requirement and scanning the
`node_modules/.deno` directory for the best matching package, so it
relies on deno's node_modules structure.
Additionally to make the transition from package.json to deno.json
easier, Deno now:
1. Installs npm deps in a deno.json at the same time as installing npm
deps from a package.json.
2. Uses the alias in the import map for `node_modules/<alias>` for
better package.json compatiblity.
These now works:
```
$ deno add @std/dotenv/load
$ deno add npm:preact/hooks
```
Previously we were erroring out, because this is a "package reference"
including
a subpath.
Closes https://github.com/denoland/deno/issues/25385
---------
Signed-off-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Co-authored-by: David Sherret <dsherret@users.noreply.github.com>
`--allow-run` even with an allow list has essentially been
`--allow-all`... this locks it down more.
1. Resolves allow list for `--allow-run=` on startup to an absolute
path, then uses these paths when evaluating if a command can execute.
Also, adds these paths to `--deny-write`
1. Resolves the environment (cwd and env vars) before evaluating
permissions and before executing a command. Then uses this environment
to evaluate the permissions and then evaluate the command.
This PR serves as a part of #22907 .
---------
Signed-off-by: David Sherret <dsherret@users.noreply.github.com>
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Co-authored-by: David Sherret <dsherret@users.noreply.github.com>
Remove `--allow-hrtime` and `--deny-hrtime`. We are doing this because
it is already possible to get access to high resolution timers through
workers and SharedArrayBuffer.
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Note: this is implemented on Deploy. However, according to @magurotuna,
a thin compatibility layer might be in the works that'd prevent
breakages for PRs such as this one.
Towards #22079
`deno bundle` now produces:
```
error: ⚠️ `deno bundle` was removed in Deno 2.
See the Deno 1.x to 2.x Migration Guide for migration instructions: https://docs.deno.com/runtime/manual/advanced/migrate_deprecations
```
`deno bundle --help` now produces:
```
⚠️ `deno bundle` was removed in Deno 2.
See the Deno 1.x to 2.x Migration Guide for migration instructions: https://docs.deno.com/runtime/manual/advanced/migrate_deprecations
Usage: deno bundle [OPTIONS]
Options:
-q, --quiet Suppress diagnostic output
--unstable Enable all unstable features and APIs. Instead of using this flag, consider enabling individual unstable features
To view the list of individual unstable feature flags, run this command again with --help=unstable
```
This commit effectively turns Deno into Deno 2.0.
This is done by forcing `DENO_FUTURE=1` env var, that was available in
the past few months to try Deno 2 changes.
This commit contains several breaking changes scheduled for Deno 2:
- all deprecated JavaScript APIs are not available any more, mostly
`Deno.*` APIs
- `window` global is removed
- FFI, WebGPU and FS APIs are now stable and don't require
`--unstable-*` flags
- import assertions are no longer supported
- "bring your own node modules" is enabled by default
This is the first commit in a series that are scheduled before the Deno
2 release.
Follow up work is tracked in
https://github.com/denoland/deno/issues/25241.
---------
Co-authored-by: Asher Gomez <ashersaupingomez@gmail.com>
Co-authored-by: Nayeem Rahman <nayeemrmn99@gmail.com>
Co-authored-by: Nathan Whitaker <nathan@deno.com>
Stores normalized version constraints in the lockfile, which will
improve reproducibility and will fix a bug with duplicate specifiers
ending up in the lockfile. Also, gets rid of some duplicate data in the
specifiers area of the lockfile.
This commit remove `--lock-write` that was deprecated in v1.45 release.
Closes https://github.com/denoland/deno/issues/24167.
---------
Co-authored-by: Asher Gomez <ashersaupingomez@gmail.com>
Fix task names containing a colon not being found with `deno run`. We
were only checking for a `module not found` error message, but strings
containing a colon throw a different error.
Fixes https://github.com/denoland/deno/issues/25232
This commit enables the `log` feature for the `tracing` crate.
This allows us to examine additional detailed logs emitted by third party crates
that use `tracing` crate for logging by setting `RUST_LOG` env var or passing
`-L` option in command line.
Closes #25045
Fixes #24607.
This PR makes the logic that caches top level dependencies (things
present in import map) smarter, so we handle JSR dependencies without
root exports.
This commit deprecates "import assertions" proposal that has been
replaced with "import attributes".
Any time an import assertion is encountered a warning will be printed
to the terminal. This warning will be printed for both local and
remote files (ie. user code and dependencies).
Import assertions support will be removed in Deno 2.
PrismJS uses `WorkerGlobalScope` and `self` for detecting browser's Web
Worker context:
59e5a34713/prism.js (L11)
Now the detection logic above is broken when it's imported from Deno's
Web Worker context because we only hide `self` (Prism assumes when
`WorkerGlobalScope` is available, `self` is also available).
This change fixes the above by also hiding `WorkerGlobalScope` global in
Node compat mode.
closes #25008
This change improves the Node.js compatibility in managed npm resolution
mode by disabling the discovery of `node_modules` when the
main specifier is inside of `DENO_DIR`.
closes #22732
closes #24589
From upgrading `deno_lint`.
Previously if you had a node project that used a bunch of node globals
(`process.env`, etc), you would have to fix the errors by hand. This PR
includes a new lint that detects usages of node globals (`process`,
`setImmediate`, `Buffer`, etc.) and provides an autofix to import the
correct value. For instance:
```ts
// main.ts
const _foo = process.env.FOO;
```
`deno lint` gives you
```ts
error[no-node-globals]: NodeJS globals are not available in Deno
--> /home/foo.ts:1:14
|
1 | const _foo = process.env.FOO;
| ^^^^^^^
= hint: Add `import process from "node:process";`
docs: https://lint.deno.land/rules/no-node-globals
Found 1 problem (1 fixable via --fix)
Checked 1 file
```
And `deno lint --fix` adds the import for you:
```ts
// main.ts
import process from "node:process";
const _foo = process.env.FOO;
```
Linux/macos only currently.
Part of https://github.com/denoland/deno/issues/23524 (fixes it on
platforms other than windows).
Part of #16899 (fixes it on platforms other than windows).
After this PR, playwright is functional on mac/linux.
This commit adds capability to format HTML, Svelte, Vue, Astro and Angular
files.
"--unstable-html" is required to format HTML files, and "--unstable-component"
flag is needed to format other formats. These can also be specified in the config
file.
Close #25015
This PR integrates [Malva](https://github.com/g-plane/malva) into `deno
fmt`, which introduces the ability to format CSS, SCSS, Sass and Less
files.
On Linux x64 6.10, this PR increases about 800KiB:
```
❯ wc -c target/release/deno
125168728 target/release/deno
❯ wc -c target/release/deno
124349456 target/release/deno
```
This PR updates `deno run` to fallback to executing tasks when there is
no script with the specified name. If there are both script and a task
with the same name then `deno run` will prioritise executing the script.
This moves YAML formatting behind an unstable flag for Deno 1.46. This
will make it opt-in to start and then we can remove the flag to make it
on by default in version of Deno after that.
This can be specified by doing `deno fmt --unstable-yaml` or by
specifying the following in a deno.json file:
```json
{
"unstable": ["fmt-yaml"]
}
```
This change aims to replace all relative import specifiers targeted at
`tests/util/std` with mapped ones (using a `deno.json` file). Towards
updating the `std` git submodule.
Two small changes:
- In our BYONM errors, suggest running `deno install` instead of `npm
install` if `DENO_FUTURE` is set
- Only emit warning about `deno install` changes if you do `deno install
<foo>` with deno_future unset
Regression from
04f9db5b22
Originally I thought to fix the issue in the PR we needed to explicitly
pass through the `node-modules-dir` flag, but after applying the correct
fix that david pointed out (setting `NPM_PROCESS_STATE`) that wasn't
necessary (or correct).
We had a test for deno task with BYONM, but it only tested with
`"unstable": ["byonm"]` in deno.json, so it didn't catch this.
Originally landed in
f6fd6619e7.
Reverted in https://github.com/denoland/deno/pull/24574.
This reland contains a fix that sends "Accept: */*" header for calls made
from "FileFetcher". Absence of this header made downloading source code
from JSR broken. This is tested by ensuring this header is present in the
test server that servers JSR packages.
---------
Co-authored-by: Sean McArthur <sean@seanmonstar.com>
This makes bare specifiers for npm packages work when inside a
workspace, which emulates the same behaviour as when there's a
node_modules directory. The bare specifier can be overwritten by
specifying an import map entry or package.json dependency entry.
* https://github.com/denoland/deno_config/pull/88
Closes #24605
This commit re-implements `ext/fetch` and all dependent crates
using `hyper` and `hyper-util`, instead of `reqwest`.
The reasoning is that we want to have greater control and access
to low level `hyper` APIs when implementing `fetch` API as well
as `node:http` module.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
NPM inserts a default install script when a package has a `binding.gyp`
file.
It's possible, however, for the package to exclude the `binding.gyp`
file when they publish, and in this case the install script will never
succeed for a user of the package.
This happens with `fsevents`, for instance. They don't include the
`binding.gyp` file in their published tarball, but the default install
script appears in the manifest served by `npm`.
This causes us to warn that `fsevents` has an install script, but when
you try to run it it fails due to `binding.gyp` not existing.
This is a temporary fix, which is not perfect - specifying
`--import-map`
will break resolution of packages defined in `workspace` setting, but
erroring on `--import-map` currently causes regression in code that
worked fine in v1.44.x.
Previously when we printed out the packages that skipped install
scripts, we didn't prefix them with `npm:`. When you pass
`--allow-scripts` though, we require `npm:`, which means you can't just
copy paste the package name from the warning message.
Adds support for running npm package lifecycle scripts, opted into via a
new `--allow-scripts` flag.
With this PR, when running `deno cache` (or `DENO_FUTURE=1 deno
install`) you can specify the `--allow-scripts=pkg1,pkg2` flag to run
lifecycle scripts attached to the given packages.
Note at the moment this only works when `nodeModulesDir` is true (using
the local resolver).
When a package with un-run lifecycle scripts is encountered, we emit a
warning suggesting things may not work and to try running lifecycle
scripts. Additionally, if a package script implicitly requires
`node-gyp` and it's not found on the system, we emit a warning.
Extra things in this PR:
- Extracted out bits of `task.rs` into a separate module for reuse
- Added a couple fields to `process.config` in order to support
`node-gyp` (it relies on a few variables being there)
- Drive by fix to downloading new npm packages to test registry
---
TODO:
- [x] validation for allow-scripts args (make sure it looks like an npm
package)
- [x] make allow-scripts matching smarter
- [ ] figure out what issues this closes
---
Review notes:
- This adds a bunch of deps to our test registry due to using
`node-gyp`, so it's pretty noisy
Adds much better support for the unstable Deno workspaces as well as
support for npm workspaces. npm workspaces is still lacking in that we
only install packages into the root node_modules folder. We'll make it
smarter over time in order for it to figure out when to add node_modules
folders within packages.
This includes a breaking change in config file resolution where we stop
searching for config files on the first found package.json unless it's
in a workspace. For the previous behaviour, the root deno.json needs to
be updated to be a workspace by adding `"workspace":
["./path-to-pkg-json-folder-goes-here"]`. See details in
https://github.com/denoland/deno_config/pull/66
Closes #24340
Closes #24159
Closes #24161
Closes #22020
Closes #18546
Closes #16106
Closes #24160
Prevent panic when enabling a feature that is already enabled by
removing duplicate features.
Closes #22015
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Closes #18296.
Adds a `--frozen` (alias `--frozen-lockfile`) flag that errors out if
the lockfile is out of date. This is useful for running in CI (where an
out of date lockfile is usually a mistake) or to prevent accidental
changes in dependencies.
![Screenshot 2024-06-26 at 7 11
13 PM](https://github.com/denoland/deno/assets/17734409/538404b8-b422-4f05-89e8-4c9b1c248576)
This commit adds discovery of `.npmrc` files in user's homedir.
This is not a perfect fix as it doesn't merge multiple `.npmrc` files
together as per https://github.com/denoland/deno/issues/23954
but allows to fallback if no `.npmrc` file is discovered in the project
root.
This commit updates Deno to use `reqwest` at 0.12.4
and `rustls` at 0.22. Other related crates were updated
as well to match versions accepted by `reqwest` and `rustls`.
Note: we are not using the latest available `rustls` yet,
but this upgrade was non-trivial already, so a bump to
0.23 for `rustls` will be done in a separate commit.
Closes #23370
---------
Signed-off-by: Ryan Dahl <ry@tinyclouds.org>
Signed-off-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Co-authored-by: Ryan Dahl <ry@tinyclouds.org>
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
Fixes a regression introduced in
https://github.com/denoland/deno/pull/24170, where we wouldn't actually
set up the node modules dir on `deno install` if there was an up to date
deno lockfile present.
Previously we were relying on the fact that resolving pending module
resolution called `cache_packages` (which sets up the node modules dir).
When pending resolutions were removed, and the `resolve_pending`
function with it, we also removed the `cache_packages` call needed to
set up node modules.
Previously various reads of files in `node_modules` would error on
invalid UTF-8. These were cases involving:
- reading package.json from Rust
- reading package.json from JS
- reading CommonJS files from JS
- reading CommonJS files from Rust (for ESM translation)
- reading ESM files from Rust
Fixes #24012.
In the case of multiple packages providing a binary with a same name, we
were basically leaving the results undefined (since we set up things in
parallel, and whichever got set up first won). In addition, we were
warning about these cases, even though it's a situation that's expected
to occur.
Instead, in the case of a collision in the binary names, we prefer the
binary provided by the package with the least depth in the dependency
tree.
While I was at it, I also took moved more code to `bin_entries.rs` since
it was starting to get a bit cluttered.
This commits adds the ability to set a would-be exit code
for the Deno process without forcing an immediate exit,
through the new `Deno.exitCode` API.
- **Implements `Deno.exitCode` getter and setter**: Adds support for
setting
and retrieving a would-be exit code via `Deno.exitCode`.
This allows for asynchronous cleanup before process termination
without immediately exiting.
- **Ensures type safety**: The setter for `Deno.exitCode` validates that
the provided value is a number, throwing a TypeError if not, to ensure
that
only valid exit codes are set.
Closes to #23605
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Enhanced warning message for --env flag with run and eval subcommands.
The commit is specifically made to address issue #23674 by improving the
warning messages that appear when using the --env flag with run or eval
subcommands in the following scenarios:
1. Missing environment file.
2. Incorrect syntax in the environment file content.
**Changes made**
- Distinguishes between cases of missing environment file and wrong
syntax in the environment file content.
- Shows a concise warning message to convey the case/issue occurred.
**Code changes & enhancements**
- Implemented a match statement to handle different types of errors
received while getting and parsing the file content to display a concise
warning message, rather than simple error check and then displaying the
same warning message for whatever the type of error is.
- Updated the related existing tests to reflect the new warning
messages.
- Added two test cases to cover the wrong environment file content
syntax with both run and eval subcommands.
**Impact**
The use of --env flag with both run/eval would be more user-friendly as
it gives a precise description of what is not right when using
incorrectly.
If you could give it a look, @dsherret , I appreciate your feedback on
these changes.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This commit adds initial support for ".npmrc" files.
Currently we only discover ".npmrc" files next to "package.json" files
and discovering these files in user home dir is left for a follow up.
This pass supports "_authToken" and "_auth" configuration
for providing authentication.
LSP support has been left for a follow up PR.
Towards https://github.com/denoland/deno/issues/16105
Fixes #23571.
Previously, we required a `deno.json` to be present (or the `--lock`
flag) in order for us to resolve a `deno.lock` file. This meant that if
you were using deno in an npm-first project deno wouldn't use a
lockfile.
Additionally, while I was fixing that, I discovered there were a couple
bugs keeping the future `install` command from using a lockfile.
With this PR, `install` will actually resolve the lockfile (or create
one if not present), and update it if it's not up-to-date. This also
speeds up `deno install`, as we can use the lockfile to skip work during
npm resolution.
By default, uses a 60 second timeout, backing off 2x each time (can be
overridden using the hidden `DENO_SLOW_TEST_TIMEOUT` which we implement
only really for spec testing.
```
Deno.test(async function test() {
await new Promise(r => setTimeout(r, 130_000));
});
```
```
$ target/debug/deno test /tmp/test_slow.ts
Check file:///tmp/test_slow.ts
running 1 test from ../../../../../../tmp/test_slow.ts
test ...'test' is running very slowly (1m0s)
'test' is running very slowly (2m0s)
ok (2m10s)
ok | 1 passed | 0 failed (2m10s)
```
---------
Signed-off-by: Matt Mastracci <matthew@mastracci.com>
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This brings in [`runtimelib`](https://github.com/runtimed/runtimed) to
use:
## Fully typed structs for Jupyter Messages
```rust
let msg = connection.read().await?;
self
.send_iopub(
runtimelib::Status::busy().as_child_of(msg),
)
.await?;
```
## Jupyter paths
Jupyter paths are implemented in Rust, allowing the Deno kernel to be
installed completely via Deno without a requirement on Python or
Jupyter. Deno users will be able to install and use the kernel with just
VS Code or other editors that support Jupyter.
```rust
pub fn status() -> Result<(), AnyError> {
let user_data_dir = user_data_dir()?;
let kernel_spec_dir_path = user_data_dir.join("kernels").join("deno");
let kernel_spec_path = kernel_spec_dir_path.join("kernel.json");
if kernel_spec_path.exists() {
log::info!("✅ Deno kernel already installed");
Ok(())
} else {
log::warn!("ℹ️ Deno kernel is not yet installed, run `deno jupyter --install` to set it up");
Ok(())
}
}
```
Closes https://github.com/denoland/deno/issues/21619
Construct a new module graph container for workers instead of sharing it
with the main worker.
Fixes #17248
Fixes #23461
---------
Co-authored-by: David Sherret <dsherret@gmail.com>
This PR implements the changes we plan to make to `deno install` in deno
2.0.
- `deno install` without arguments caches dependencies from
`package.json` / `deno.json` and sets up the `node_modules` folder
- `deno install <pkg>` adds the package to the config file (either
`package.json` or `deno.json`), i.e. it aliases `deno add`
- `deno add` can also add deps to `package.json` (this is gated behind
`DENO_FUTURE` due to uncertainty around handling projects with both
`deno.json` and `package.json`)
- `deno install -g <bin>` installs a package as a globally available
binary (the same as `deno install <bin>` in 1.0)
---------
Co-authored-by: Nathan Whitaker <nathan@deno.com>
Allows writing named sub-tests. These are:
1. Filterable on the command line via `cargo test ...`
2. Run in parallel
3. Use a fresh temp and deno dir for each test (unlike steps)
This commit updates our testing npm registry to handle
additional `@denotest2` scope in addition to `@denotest`
scope. I might have to update it further in the future to handle
additional scopes, but it's good enough for now.
Part of #22607 (probably closes it, but I haven't done thorough testing)
Makes it so that `require.resolve` with `paths` specified will fallback
to using the global cache when the paths can't be found when using a
global cache (not when using a node_modules folder)
By default, `deno serve` will assign port 8000 (like `Deno.serve`).
Users may choose a different port using `--port`.
`deno serve /tmp/file.ts`
`server.ts`:
```ts
export default {
fetch(req) {
return new Response("hello world!\n");
},
};
```
This commit changes the workspace support to provide all workspace
members to be available as imports based on their names and versions.
Closes https://github.com/denoland/deno/issues/23343
This allows people to use imports like:
```ts
import "./app.css";
```
...with `deno check` in systems where there's a bundle step (ex. Vite).
This will still error when using it with `deno run` or if the referenced
file does not exist.
See test cases for behaviour.
I'm unsure whether we're planning to make the `Deno.FsFile` constructor
illegal or remove `FsFile` from the `Deno.*` namspace in Deno 2. Either
way, this PR works towards the former. I'll create a superceding PR if
the latter is planned instead.
Towards #23089
Unused locals and parameters don't make sense to surface in remote
modules. Additionally, fast check can cause these kind of diagnostics
when publishing, so they should be ignored.
Closes #22959