Towards #18455
This commit implements `checkPrimeSync` and `checkPrime` in node:crypto
using the Miller-Rabin primality test (fun fact: it actually is a test
for composite numbers)
It first compares the candidate against many known small primes and if
not, proceeds to run the Miller-Rabin primality test.
http://nickle.org/examples/miller-rabin.5c used as reference
implementation.
This gets SQLite off the flamegraph and reduces initialization time by
somewhere between 0.2ms and 0.5ms. In addition, I took the opportunity
to move all the cache management code to a single place and reduce
duplication. While the PR has a net gain of lines, much of that is just
being a bit more deliberate with how we're recovering from errors.
The existing caches had various policies for dealing with cache
corruption, so I've unified them and tried to isolate the decisions we
make for recovery in a single place (see `open_connection` in
`CacheDB`). The policy I chose was:
1. Retry twice to open on-disk caches
2. If that fails, try to delete the file and recreate it on-disk
3. If we fail to delete the file or re-create a new cache, use a
fallback strategy that can be chosen per-cache: InMemory (temporary
cache for the process run), BlackHole (ignore writes, return empty
reads), or Error (fail on every operation).
The caches all use the same general code now, and share the cache
failure recovery policy.
In addition, it cleans up a TODO in the `NodeAnalysisCache`.
This internal node hook is used by libraries such as `ts-node` when used
as a require hook `node -r ts-node/register`. That combination is often
used with test frameworks like `mocha` or `jasmine`.
We had a reference to `Module._preloadModules` in our code, but the
implementation was missing. While fixing this I also noticed that the
`fakeParent` module that we create internally always threw because of
the `pathDirname` check on the module id in the constructor of `Mdoule`.
So this code path was probably broken for a while.
```txt
✖ ERROR: Error: Empty filepath.
at pathDirname (ext:deno_node/01_require.js:245:11)
at new Module (ext:deno_node/01_require.js:446:15)
at Function.Module._resolveFilename (ext:deno_node/01_require.js:754:28)
at Function.resolve (ext:deno_node/01_require.js:1015:19)
```
This commit adds the `crypto.createSecretKey` API.
Key management: This follows the same approach as our WebCrypto
CryptoKey impl where we use WeakMap for storing key material and a
handle is passed around, such that (only internal) JS can access the key
material and we don't have to explicitly close a Rust resource.
As a result, `createHmac` now accepts a secret KeyObject.
Closes https://github.com/denoland/deno/issues/17844
No need for two almost identical implementations of the same thing
---------
Co-authored-by: Yoshiya Hinosawa <stibium121@gmail.com>
Co-authored-by: Aapo Alasuutari <aapo.alasuutari@gmail.com>
Previously the mapping between `AnyValue::Bool` and `KeyPart::Bool` was
inverted.
This patch also allows using the empty key `[]` as range start/end to
`snapshot_read`.
Currently `Deno.openKv(":memory:")` requests read+write permissions for
`./:memory:` even though no file is read or written. Also added some
guards for special sqlite paths that were unintentionally opted into.
This commit adds unstable "Deno.openKv()" API that allows to open
a key-value database at a specified path.
---------
Co-authored-by: Luca Casonato <hello@lcas.dev>
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This PR changes the inspect result of anonymous functions from
`[Function]` to `[Function (anonymous)]`. This behavior is aligned
to `util.inspect` of Node.js.
Moving some code around in `ext/node` is it's a bit better well defined
and makes it possible for others to embed it.
I expect to see no difference in startup perf with this change.
This commit adds support for spawning Web Workers in self-contained
binaries created with "deno compile" subcommand.
As long as module requested in "new Worker" constructor is part of the
eszip (by means of statically importing it beforehand, or using "--include"
flag), then the worker can be spawned.
This change will enable dynamic imports and web workers to use modules
not reachable from the main module, by passing a list of extra side
module roots as options to `deno compile`.
This can be done by specifying "--include" flag that accepts a file path or a
URL. This flag can be specified multiple times, to include several modules.
The modules specified with "--include" flag, will be added to the produced
"eszip".
This PR _**temporarily**_ removes WebGPU (which has behind the
`--unstable` flag in Deno), due to performance complications due to its
presence.
It will be brought back in the future; as a point of reference, Chrome
will ship WebGPU to stable on 26/04/2023.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Closes #17831. This change hides the indices of any indexed collection
when triggering tab completion for object properties in the REPL.
An example is shown in the issue, but for verbosity here is another.
Before the change:
```
> const arr = new Uint8ClampedArray([1, 2, 3])
undefined
> arr.
0 map
1 reverse
2 reduce
...
```
After the change:
```
> const arr = new Uint8ClampedArray([1, 2, 3])
undefined
> arr.
constructor reduce
BYTES_PER_ELEMENT reduceRight
buffer set
...
```
Co-authored-by: David Sherret <dsherret@users.noreply.github.com>
This commit adds support for retrieving `dev` information
when stating files on Windows.
Additionally `Deno.FileInfo` interfaces was changed to always
return 0 for fields that we don't retrieve information for on Windows.
Closes https://github.com/denoland/deno/issues/18053
---------
Co-authored-by: David Sherret <dsherret@gmail.com>
This commit changes "deno_core" to not rely on implicitly calling
"std::env::current_dir()" when resolving module specifiers using
APIs from "deno_core::modules_specifier".
Supersedes https://github.com/denoland/deno/pull/15454
This commit changes current "deno_core::resolve_url_or_path" API to
"resolve_url_or_path_deprecated" and adds new "resolve_url_or_path"
API that requires to explicitly pass the directory from which paths
should be resolved to.
Some of the call sites were updated to use the new API, the reminder
of them will be updated in a follow up PR.
Towards landing https://github.com/denoland/deno/pull/15454
Creating the node_modules folder when the packages are already
downloaded can take a bit of time and not knowing what is going on can
be confusing. It's better to show a progress bar.
This commit renames "deno_core::InternalModuleLoader" to
"ExtModuleLoader" and changes the specifiers used by the
modules loaded from this loader to "ext:".
"internal:" scheme was really ambiguous and it's more characters than
"ext:", which should result in slightly smaller snapshot size.
Closes https://github.com/denoland/deno/issues/18020
We use information about build in several extension crates like
"ext/node" or "runtime/". In an effort to move "fs" APIs to a separate
crate it is a prerequisite to have this information available outside
of the "runtime/" crate.
This commit moves definition of "build" object to "Deno.core" that is
later forwarded to "Deno.build".
This commit changes "include_js_files!" macro from "deno_core"
in a way that "dir" option doesn't cause specifiers to be rewritten
to include it.
Example:
```
include_js_files! {
dir "js",
"hello.js",
}
```
The above definition required embedders to use:
`import ... from "internal:<ext_name>/js/hello.js"`.
But with this change, the "js" directory in which the files are stored
is an implementation detail, which for embedders results in:
`import ... from "internal:<ext_name>/hello.js"`.
The directory the files are stored in, is an implementation detail and
in some cases might result in a significant size difference for the
snapshot. As an example, in "deno_node" extension, we store the
source code in "polyfills" directory; which resulted in each specifier
to look like "internal:deno_node/polyfills/<module_name>", but with
this change it's "internal:deno_node/<module_name>".
Given that "deno_node" has over 100 files, many of them having
several import specifiers to the same extension, this change removes
10 characters from each import specifier.
denoland/eszip#115 added support for statically-analyzed dynamic imports
in eszip, which made `deno compile` support dynamic imports starting
from #17858. This PR adds a test for it.
----
This test is adapted from PR #17663.
Closes #17908
This lazily does an "npm install" when any package name matches what's
found in the package.json or when running a script from package.json
with deno task.
Part of #17916
Closes #17928
This is a super basic initial implementation. We don't create a
`node_modules/.bin` folder at the moment and add it to the PATH like we
should which is necessary to make command name resolution in the
subprocess work properly (ex. you run a script that launches another
script that then tries to launch an "npx command"... this won't work
atm).
Closes #17492
This commit enables resolution of "bare specifiers" (eg. "import express
from 'express';") if a "package.json" file is discovered.
It's a step towards being able to run projects authored for Node.js
without any changes.
With this commit we are able to successfully run Vite projects without
any changes to the user code.
---------
Co-authored-by: David Sherret <dsherret@gmail.com>
This commit adds new "A" option to the interactive permission prompt, that will
allow all subsequent permissions for given group (domain). Ie. when querying for
permissions to access eg. env variables responding with "A" will allow access
to all environmental variables.
This works for all permission domains and should make permission prompts
more ergonomic for users.
This changes npm specifiers to be handled by deno_graph and resolved to
an npm package name and version when the specifier is encountered. It
also slightly changes how npm specifier resolution occurs—previously it
would collect all the npm specifiers and resolve them all at once, but
now it resolves them on the fly as they are encountered in the module
graph.
https://github.com/denoland/deno_graph/pull/232
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This commits adds auto-discovery of "package.json" file when running
"deno run" and "deno task" subcommands. In case of "deno run" the
"package.json" is being looked up starting from the directory of the
script that is being run, stopping early if "deno.json(c)" file is found
(ie. FS tree won't be traversed "up" from "deno.json").
When "package.json" is discovered the "--node-modules-dir" flag is
implied, leading to creation of local "node_modules/" directory - we
did that, because most tools relying on "package.json" will expect
"node_modules/" directory to be present (eg. Vite). Additionally
"dependencies" and "devDependencies" specified in the "package.json"
are downloaded on startup.
This is a stepping stone to supporting bare specifier imports, but
the actual integration will be done in a follow up commit.
---------
Co-authored-by: David Sherret <dsherret@gmail.com>
This PR adds the remaining ~650 Node.js compat test cases from std/node.
Among these 650 cases, about 130 cases are now failing. These failing
cases are prefixed with `TODO:` in `tests/node_compat/config.json`.
These will be addressed in later PRs.
Adds two test files: "cli/tests/unit_node/process_test.ts" and
"cli/tests/unit_node/child_process_test.ts"
---------
Co-authored-by: Yoshiya Hinosawa <stibium121@gmail.com>
This PR changes Node.js/npm compatibility layer to use polyfills for
built-in Node.js
embedded in the snapshot (that are coming from "ext/node" extension).
As a result loading `std/node`, either from
"https://deno.land/std@<latest>/" or
from "DENO_NODE_COMPAT_URL" env variable were removed. All code that is
imported via "npm:" specifiers now uses code embedded in the snapshot.
Several fixes were applied to various modules in "ext/node" to make
tests pass.
---------
Co-authored-by: Yoshiya Hinosawa <stibium121@gmail.com>
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
This was not caught in the previous test case, as the response body was
smaller than the size of `HEAD` response.
This made `nwritten < responseLen` check in `writeFixedResponse` to
fail, and not trigger `op_flash_respond_async` as a result.
When the response body is larger than the `HEAD` though, as in the
updated test case (`HEAD` i 120 bytes, where our response is 300 bytes),
it would think that we still have something to send, and effectively
panic, as `op_flash_respond` already removed the request from the pool.
This change, makes the `handleResponse` function always calculate the
number of bytes to transmit when `HEAD` request is encountered.
Effectively ignoring `Content-Length` of the body, but still setting it
correctly in the request header itself.
Fixes https://github.com/denoland/deno/issues/17737
This PR refactors all internal js files (except core) to be written as
ES modules.
`__bootstrap`has been mostly replaced with static imports in form in
`internal:[path to file from repo root]`.
To specify if files are ESM, an `esm` method has been added to
`Extension`, similar to the `js` method.
A new ModuleLoader called `InternalModuleLoader` has been added to
enable the loading of internal specifiers, which is used in all
situations except when a snapshot is only loaded, and not a new one is
created from it.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This commit changes handling of config file to enable
specifying "imports" and "scopes" objects effectively making
the configuration file an import map.
"imports" and "scopes" take precedence over "importMap" configuration,
but have lower priority than "--importmap" CLI flag.
Co-authored-by: David Sherret <dsherret@users.noreply.github.com>
Co-authored-by: David Sherret <dsherret@gmail.com>
This commit adds sync versions of async APIs to "Deno.permissions"
namespace.
Following APIs were added:
- "Deno.permissions.querySync"
- "Deno.permissions.requestSync"
- "Deno.permissions.revokeSync"
Allows to change behavior of `deno fmt` to use "ASI" setting for
semicolons instead of always prefering them, this is done
by "--options-semi=asi" flag or `"semi": "asi"` setting
in the config file.
This commit removes "Deno.core" namespace. It is strictly private API
that has no stability guarantees, we were supposed to remove it long time ago.
Co-authored-by: Yoshiya Hinosawa <stibium121@gmail.com>
The way the standalone mode handles the `--cert` flag is different to
all other modes. This is because `--cert` takes a path to the
certificate file, which is directly added to the root cert store; except
for compile mode, where its byte contents are stored in the standalone
metadata, and they are added to the root cert store after the
`ProcState` is created.
This change instead changes `Flags::ca_file` (an `Option<String>`) into
`Flags::ca_data`, which can represent a `String` file path or a
`Vec<u8>` with the certificate contents. That way, standalone mode can
create a `ProcState` whose root cert store alreay contains the
certificate.
This change also adds a tests for certificates in standalone mode, since
there weren't any before.
This refactor will help with implementing web workers in standalone mode
in the future.
Updated third_party dlint to v0.37.0 for GitHub Actions. This PR
includes following changes:
* fix(prefer-primordials): Stop using array pattern assignments
* fix(prefer-primordials): Stop using global intrinsics except for
`SharedArrayBuffer`
* feat(guard-for-in): Apply new guard-for-in rule
The leading cause of the problem was that `handleResponse` has
`tryRespondChunked` passed as an argument, which in turn is implemented
as a call to `core.ops.op_try_flash_respond_chuncked`, that throws in
the repro code.
`handleResponse` was not handled correctly, as it not returned any
value, and had no `catch` attached to it.
It also effectively was never correctly handled inside two other blocks
with `resp.then` and `PromisePrototypeCatch(PromisePrototypeThen(resp,
"..."))` as well, as it just short-circuited the promise with an empty
resolve, instead of relying on the last `(async () => {})` block.
This change makes `handleResponse` return a correct value and attach
`onError` handler to the "non-thenable" variant of response handling
code.
This commit changes "ProcState" to store "file_fetcher" field in an "Arc",
allowing it to be preserved between restarts and thus keeping the state
alive between the restarts. File watchers for "deno test" and "deno bench"
now reset "ProcState" between restarts.
This commit changes signature of "deno_core::ModuleLoader::resolve" to pass
an enum indicating whether or not we're resolving a specifier for dynamic import.
Additionally "CliModuleLoader" was changes to store both "parent permissions" (or
"root permissions") as well as "dynamic permissions" that allow to check for permissions
in top-level module load an dynamic imports.
Then all code paths that have anything to do with Node/npm compat are now checking
for permissions which are passed from module loader instance associated with given
worker.
Turns out we were cloning permissions which after prompting were discarded,
so the state of permissions was never preserved. To handle that we need to store
all permissions behind "Arc<Mutex<>>" (because there are situations where we
need to send them to other thread).
Testing and benching code still uses "Permissions" in most places - it's undesirable
to share the same permission set between various test/bench files - otherwise
granting or revoking permissions in one file would influence behavior of other test
files.
Previously, `Deno.permissions.[revoke|request]()` wouldn't correctly
process the `path: URL` when `name` was `ffi`. This change fixes that
behaviour and adds a new function, `formDescriptor()`, to ensure `URL`
arguments are consistently handled across
`Deno.permissions.[query|revoke|request]()`.
This commit fixes "Add all missing imports" quick fix; before
it was replacing all occurrences with the same specifier. Now
every line returned from TSC is processed individually.
This commit adds "Deno.Conn.ref()" and "Deno.Conn.unref()" methods.
These methods can be used to make connection block or not block the
event loop from finishing. Refing/unrefing only influences "read"
operations - ie. scheduling writes to a connection _do_ keep event
loop alive.
Required for https://github.com/denoland/deno/issues/16710
This commit fixes handling of rejected promises in dynamic imports
evaluation.
Previously we were running callbacks for next ticks and macrotasks
_before_ polling
dynamic imports and checked for unhandled rejections immediately after.
This is wrong,
as `unhandledrejection` event is dispatched and its callbacks are run as
macrotasks.
This commit changes order of actions performed by the event loop to
following:
- poll async ops
- poll dynamic imports
- run next tick callbacks
- run macrotask callbacks
- check for unhandled promise rejections
This commit fixes formatting of JSError with "errors" property. Before this
commit all instances of "Error" were treated as if they were "AggregateError"
if they had "errors" property. After this commit only actual instances of
"AggregateError" are formatted in such a way, while instances of "Error"
that have "errors" property are formatted without showing details of "errors".
Previously, errored streaming response bodies did not cause the HTTP
stream to be aborted. It instead caused the stream to be closed gracefully,
which had the result that the client could not detect the difference
between a successful response and an errored response.
This commit fixes the issue by aborting the stream on error.
Right now an error in a request body stream causes an uncatchable
global promise rejection. This PR fixes this to instead propagate the
error correctly into the promise returned from `fetch`.
It additionally fixes errored readable stream bodies being treated as
successfully completed bodies by Rust.
This commit changes implementation of "Deno.memoryUsage()" to return
correct value for "rss" field. To do that we implement a specialized function
per os to retrieve this information.
This commit adds new "--inspect-wait" flag which works similarly
to "--inspect-brk" in that it waits for inspector session to be
established before running code. However it doesn't break on the first
statement of user code, but instead runs it as soon as a session
is established.
This commit removes three unstable Deno APIs:
- "Deno.spawn()"
- "Deno.spawnSync()"
- "Deno.spawnChild()"
These APIs were replaced by a unified "Deno.Command" API.
This allows the user to completely opt out from the lock file or rename
it without having to use `--no-lock` and/or `--lock` in all commands.
## Don’t Use Lock File
```json
{
"lock": false
}
```
## Use Lock File With a Different Name
```json
{
"lock": "deno2.lock"
}
```
The CLI args `--no-lock` and `--lock` will always override what is in
the config file.
Co-authored-by: David Sherret <dsherret@users.noreply.github.com>
This commit changes "deno repl" command to run with no permissions by
default and accept "--allow-*" flags.
This change is dictated by the fact that currently there is no way to
run REPL with limited permissions. Technically it's a breaking
change in the CLI command, but there's agreement in the team
that it has merit and it's a good solution.
Running just "deno" command still starts the REPL with full permissions
allowed, but now a banner is printed to inform users about that:
This commit adds "InspectorTester" struct which is used in
inspector tests - it encapsulated various functionalities that
we need (like reading/writing to WebSocket), but also adds
better error handling which should help with debugging flaky
tests.
Previously the inner request object of the original and the new request
were the same, causing the requests to be entangled and mutable changes
to one to be visible to the other. This fixes that.
Currently runtime exception are only displayed at the program end in
terminal, which makes it only a partial fix, as a full fix requires
https://github.com/denoland/rusty_v8/pull/1149 which adds new bindings
to the inspector that allows to notify it about thrown exceptions.
This will be handled in a follow up commit.
This commit completely rewrites inspector session polling.
Until now, there was a single function responsible for polling inspector
sessions which could have been called when polling the "JsRuntime"
as well as from internal inspector functions. There are some cases
where it's required to have reentrant polling of sessions (eg. when
"debugger" statement is run) which should be blocking until inspector
sends appropriate message to continue execution. This was not possible
before, because polling of sessions didn't have reentry ability.
As a consequence, session polling was split into two separate functions:
a) one to be used when polling from async context (on each tick of event
loop in "JsRuntime")
b) one to be used when polling synchronously and potentially blocking
(used by various inspector methods).
There are further cleanups and simplifications to be made in inspector
code, but this rewrite solves the problem at hand (being able to
evaluate
"debugger" JS statement and continue inspector functionality).
Co-authored-by: Bert Belder <bertbelder@gmail.com>
Since "Deno.spawn()", "Deno.spawnSync()" and "Deno.spawnChild"
are getting deprecated, this commits rewrites all tests and utilities to
use "Deno.Command" API instead.
This commit updates unhelpful messages that are raised when event loop
stalls on unresolved top-level promises.
Instead of "Module evaluation is still pending but there are no pending
ops or dynamic imports. This situation is often caused by unresolved
promises." and "Dynamically imported module evaluation is still pending
but there are no pending ops. This situation is often caused by
unresolved promises." we are now printing a message like:
error: Top-level await promise never resolved
[SOURCE LINE]
^
at [FUNCTION NAME] ([FILENAME])
eg:
error: Top-level await promise never resolved
await new Promise((_resolve, _reject) => {});
^
at <anonymous>
(file:///Users/ib/dev/deno/cli/tests/testdata/test/unresolved_promise.ts:1:1)
Co-authored-by: David Sherret <dsherret@users.noreply.github.com>
Refactors the `Deno.Command` class to not handle any state, but only being an intermediary to calling its methods, and as such any methods and properties besides `output`, `outputSync` & `spawn` have been removed. Interracting with a `spawn`ed subprocess now works by using the methods and properties on the returned class of the `spawn` method.
…ed promises in mind (#16616)"
This reverts commit fd023cf793.
There are reports saying that Vite is often hanging in 1.28.2 and this
is
the only PR that changed something with HTTP server. I think we should
hold off on trying to fix this and instead focus on #16787
CC @magurotuna
This commit changes "JsRuntime" to send "executionContextDestroyed"
notification when the program finishes and shows a prompt informing
that runtime is waiting for inspector to disconnect.
This PR resets the revert commit made by #16610, bringing back #16383
which attempts to fix the issue happening when we use the flash server
with `--watch` option enabled.
Also, some code changes are made to pass the regression test added in
#16610.
This code checks if permission flags are incorrectly defined after the
module name (e.g. `deno run mod.ts --allow-read` instead of the correct
`deno run --allow-read mod.ts`). If so, a simple warning is displayed.
For CommonJS packages we were not trying different extensions for files
specified as subpath of the package ([package_name]/[subpath]).
This commit fixes that.
If "--lock-write" flag was present we never passed instance of the lockfile to
the npm resolver, which made it skip adding discovered npm packages to
the lockfile. This commit fixes that, by always passing lockfile to the npm
resolver and only regenerating resolver snapshot is "--lock-write" is not
present.
Closes https://github.com/denoland/deno/issues/16666
Supports package names that aren't all lowercase.
This stores the package with a leading underscore (since that's not
allowed in npm's registry and no package exists with a leading
underscore) then base32 encoded (A-Z0-9) so it can be lowercased and
avoid collisions.
Global cache dir:
```
$DENO_DIR/npm/registry.npmjs.org/_{base32_encode(package_name).to_lowercase()}/{version}
```
node_modules dir `.deno` folder:
```
node_modules/.deno/_{base32_encode(package_name).to_lowercase()}@{version}/node_modules/<package-name>
```
Within node_modules folder:
```
node_modules/<package-name>
```
So, direct childs of the node_modules folder can have collisions between
packages like `JSON` vs `json`, but this is already something npm itself
doesn't handle well. Plus, Deno doesn't actually ever resolve to the
`node_modules/<package-name>` folder, but just has that for
compatibility. Additionally, packages in the `.deno` dir could have
collissions if they have multiple dependencies that only differ in
casing or a dependency that has different casing, but if someone is
doing that then they're already going to have trouble with npm and they
are asking for trouble in general.
If resolving types for an npm package, we didn't find "types" entry in
the conditional exports declaration we were falling-through to regular
resolution, instead of short-circuiting and giving up on resolving
types, which might lead to unwarranted errors.
Closes https://github.com/denoland/deno/issues/16649
1. There was a lot of cloning going on with `NpmPackageInfo`. This is
now stored in an `Arc<NpmPackageInfo>` and cloning only happens on the
individual version.
2. The package cache is now cleared from memory after resolution.
3. This surfaced a bug in `deno cache` and I noticed it can be more
efficient if we have multiple root specifiers if we provide all the
specifiers as roots.
This PR adds copies of several unstable APIs that are available
in "Deno[Deno.internal].nodeUnstable" namespace.
These copies do not perform unstable check (ie. don't require
"--unstable" flag to be present). Otherwise they work exactly
the same, including permission checks.
These APIs are not meant to be used by users directly and
can change at any time.
Copies of following APIs are available in that namespace:
- Deno.spawnChild
- Deno.spawn
- Deno.spawnSync
- Deno.serve
- Deno.upgradeHttpRaw
- Deno.listenDatagram
This commit makes "npm:" specifiers not require "--unstable" flag.
At the moment some APIs used by Node polyfills still require
"--unstable" which will be addressed in follow up PRs.
This adds support for peer dependencies in npm packages.
1. If not found higher in the tree (ancestor and ancestor siblings),
peer dependencies are resolved like a dependency similar to npm 7.
2. Optional peer dependencies are only resolved if found higher in the
tree.
3. This creates "copy packages" or duplicates of a package when a
package has different resolution due to peer dependency resolution—see
https://pnpm.io/how-peers-are-resolved. Unlike pnpm though, duplicates
of packages will have `_1`, `_2`, etc. added to the end of the package
version in the directory in order to minimize the chance of hitting the
max file path limit on Windows. This is done for both the local
"node_modules" directory and also the global npm cache. The files are
hard linked in this case to reduce hard drive space.
This is a first pass and the code is definitely more inefficient than it
could be.
Closes #15823
This commit fixes CJS resolution when there's a local "node_modules/"
directory.
Before this commit relative imports from CJS files where resolved
relative to
root directory of the package instead of relative to referrer file.
When streaming a resource in ext/http, with compression enabled, we
didn't flush individual chunks. This became very problematic when we
enabled `req.body` from `fetch` for FastStream recently.
This commit now correctly flushes each resource chunk after compression.
This commit adds autodiscovery of lockfile.
This only happens if Deno discovers the configuration file (either
"deno.json" or "deno.jsonc"). In such case Deno tries to load
"deno.lock"
file that sits next to the configuration file, or creates one for user
if
the lockfile doesn't exist yet.
As a consequence, "--lock" and "--lock-write" flags had been updated.
"--lock" no longer requires a value, if one is not provided, it defaults
to "./deno.lock" resolved from the current working directory.
"--lock-write"
description was updated to say that it forces to overwrite a lockfile.
Autodiscovery is currently not handled by the LSP.
In order for test cases to pass regardless of each individual's environment,
this commit adds calls to `slice` method when printing the filenames so
we can avoid getting `console.log` to truncate them.
Fixes #16305
This test has hung a lot recently on macOS. I am not sure if this is
because of a bug in the test or because of the macOS runner that is extremely
slow and flaky in general.
V8's JIT can do a better job knowing the argument count and also enable
fast call path (in future).
This also lets us call async ops without `opAsync`:
```js
const { ops } = Deno.core;
await ops.op_void_async();
```
this patch: 4405286 ops/sec
main: 3508771 ops/sec
This commit stabilizes "Deno.consoleSize()" API.
There is one change compared to previous unstable API,
in that the API doesn't accept any arguments. Console size
is established by querying syscalls for stdio streams at fd
0, 1 and 2.
This commit adds a `reuseAddress` option for UDP sockets. When this
option is enabled, one can listen on an address even though it is
already being listened on from a different process or thread. The new
socket will steal the address from the existing socket.
On Windows and Linux this uses the `SO_REUSEADDR` option, while on other
Unixes this is done with `SO_REUSEPORT`.
This behavior aligns with what libuv does.
TCP sockets still unconditionally set the `SO_REUSEADDR` flag - this
behavior matches Node.js and Go. This PR does not change this behaviour.
Co-authored-by: Luca Casonato <hello@lcas.dev>
When listening on a UNIX socket path, Deno currently tries to unlink
this path prior to actually listening. The implementation of this
behaviour is VERY racy, involves 2 additional syscalls, and does not
match the behaviour of any other runtime (Node.js, Go, Rust, etc).
This commit removes this behaviour. If a user wants to listen on an
existing socket, they must now unlink the file themselves prior to
listening.
This change in behaviour only impacts --unstable APIs, so it is not
a breaking change.
