* refactor "compile" and "runtimeCompile" in "compiler.ts" and factor out
separate methods for "compile" and "bundle" operations
* remove noisy debug output from "compiler.ts"
* provide "Serialize" implementations for enums in "msg.rs"
* rename "analyze_dependencies_and_references" to "pre_process_file" and
move it to "tsc.rs"
* refactor ModuleGraph to use more concrete types and properly annotate
locations where errors occur
* remove dead code from "file_fetcher.rs" - "SourceFile.types_url" is no
longer needed, as type reference parsing is done in "ModuleGraph"
* remove unneeded field "source_path" from ".meta" files stored for
compiled source file (towards #6080)
This commit provides a "system_loader_es5.js" bundle loader which will be added
to the bundle when the target is < ES2017, which is the minimum target syntax
required for "system_loader.js".
Supports #5913 (via Deno.bundle()) with a couple caveats:
* Allowing "deno bundle" to take a different target is not supported, as we
specifically ignore "target" when passed in a TypeScript config file. This is
because deno bundle is really intended to generate bundles that work in Deno.
It is an unintentional side effect that some bundles are loadable in browsers.
* While a target of "es3" will be accepted, the module loader will still only be
compatible with ES5 or later. Realistically no one should be expecting bundles
generated by Deno to be used on IE8 and prior, and there is just too much
"baggage" to support that at this point.
This is a minor variation of 75bb9d, which exposed some sort of internal V8 bug.
Ref #6358
This is 100% authored by Kitson Kelly. Github might change the author when landing
so I'm leaving this in:
Co-authored-by: Kitson Kelly <me@kitsonkelly.com>
This commit provides a "system_loader_es5.js" bundle loader which will be added
to the bundle when the target is < ES2017, which is the minimum target syntax
required for "system_loader.js".
Supports #5913 (via Deno.bundle()) with a couple caveats:
* Allowing "deno bundle" to take a different target is not supported, as we
specifically ignore "target" when passed in a TypeScript config file. This is
because deno bundle is really intended to generate bundles that work in Deno.
It is an unintentional side effect that some bundles are loadable in browsers.
* While a target of "es3" will be accepted, the module loader will still only be
compatible with ES5 or later. Realistically no one should be expecting bundles
generated by Deno to be used on IE8 and prior, and there is just too much
"baggage" to support that at this point.
The tests for testing that `Deno.truncateSync` and `Deno.truncate`
require write permissions seem to not call the functions they are
testing *at all* and are calling `Deno.mkdir` and `Deno.mkdirSync`
instead.
This commit replaces those calls with calls to `Deno.truncateSync`
and `Deno.truncate` respectively.
Currently WebAssembly runtime errors don't propagate up to the user as
they use urls to denote where the error occurred which get caught by the source-map
pipeline which doesn't support the wasm scheme.
This commit:
* added default file globs so "deno lint" can be run
without arguments (just like "deno fmt")
* added test for globs in "deno lint"
* upgrade "deno_lint" crate to v0.1.9
This commit fixes several regressions in TS compiler:
* double compilation of same module during same process run
* compilation of JavaScript entry point with non-JS imports
* unexpected skip of emit during compilation
Additional checks were added to ensure "allowJs" setting is
used in TS compiler if JavaScript has non-JS dependencies.
Currently sync operations on stdin are failing because tokio::Stdin
cannot be converted to a std::File.
This commit replaces tokio::stdin with a raw file descriptor
wrapped in a std::fs::File which can be converted to a
tokio::File and back again making the synchronous version
of op_read actually work.
$HOME is meaningless on Windows. It may be set by users or by third
party software, but it is non-standard and should not be relied upon.
Likewise, $USERPROFILE is meaningless on other platforms.
This reverts commit c4c6a8dae4
There is some controversy about this change because vscode doesn't interpret the fragments correctly. Needs more discussion before landing.
This commit fixes regression that caused TS dependencies
not being compiled.
Check was added that ensures TS compiler is run if
any of dependencies in module graph is TS/TSX/JSX.
This PR addresses many problems with module graph loading
introduced in #5029, as well as many long standing issues.
"ModuleGraphLoader" has been wired to "ModuleLoader" implemented
on "State" - that means that dependency analysis and fetching is done
before spinning up TS compiler worker.
Basic dependency tracking for TS compilation has been implemented.
Errors caused by import statements are now annotated with import
location.
Co-authored-by: Ryan Dahl <ry@tinyclouds.org>
Since everything that Deno loads is treated as an ES Module,
it means that all code is treated as "use strict" except for
when using the REPL. This PR changes that so code in the
REPL is also always evaluated with "use strict". There are
also a couple other places where we load code as scripts
which should also use "use strict" just in case.
This commit changes how error occurring in SWC are handled.
Changed lexer settings to properly handle TS decorators.
Changed output of SWC error to annotate with position in file.
This commit fixes a bug introduced in #5029 that caused bad
handling of redirects during module analysis.
Also ensured that duplicate modules are not downloaded.
This commit disabled flaky test in cli/module_graph.rs.
The test uses 019_media_types.ts which was known to be flaky
for some time. Test should be reenabled once test HTTP server
is rewritten to Rust.
This commit completely overhauls how module analysis is
performed in TS compiler by moving the logic to Rust.
In the current setup module analysis is performed using
"ts.preProcessFile" API in a special TS compiler worker
running on a separate thread.
"ts.preProcessFile" allowed us to build a lot of functionality
in CLI including X-TypeScript-Types header support
and @deno-types directive support. Unfortunately at the
same time complexity of the ops required to perform
supporting tasks exploded and caused some hidden
permission escapes.
This PR introduces "ModuleGraphLoader" which can parse
source and load recursively all dependent source files; as
well as declaration files. All dependencies used in TS
compiler and now fetched and collected upfront in Rust
before spinning up TS compiler.
To achieve feature parity with existing APIs this commit
includes a lot of changes:
* add "ModuleGraphLoader"
- can fetch local and remote sources
- parses source code using SWC and extracts imports, exports, file references, special
headers
- this struct inherited all of the hidden complexity and cruft from TS version and requires
several follow up PRs
* rewrite cli/tsc.rs to perform module analysis upfront and send all required source code to
TS worker in one message
* remove op_resolve_modules and op_fetch_source_files from cli/ops/compiler.rs
* run TS worker on the same thread
This commit removes "check_stderr" setting from itest! macro used
to generate integration tests. Without this setting on tests discarded
output of stderr making it very hard to debug the problem in test.
Numerous tests were changed by adding "--quiet" flag to not display
"Compile"/"Download" prompts.
This commit fixes panic occurring if $DENO_DIR is set to a relative
path, eg. "DENO_DIR=denodir deno run main.ts".
Before creating DenoDir instance given path is checked and if necessary
resolved against current working directory.
Additional sanity checks were put in place to ensure all caches
receive absolute path for the location.
This commit fixes problems with source maps in Chrome Devtools
by substituting source map URL generated by TS compiler with
actual file URL pointing to DENO_DIR.
Dummy value of "source_map_url" has been removed from
"ScriptOrigin".
Also fixes lock file which used compiled source code to generate
lock hash; it now uses source code of the file that is
being compiled.
This PR hot-fixes permission escapes in dynamic imports, workers
and runtime compiler APIs.
"permissions" parameter was added to public APIs of SourceFileFetcher
and appropriate permission checks are performed during loading of
local and remote files.
* Prepend underscores to private modules
* Remove collectUint8Arrays() It would be a misuse of Deno.iter()'s result.
* Move std/_util/async.ts to std/async
* Move std/util/sha*.ts to std/hash
Importing .wasm files is non-standardized therefore deciding to
support current functionality past 1.0 release is risky.
Besides that .wasm import posed many challenges in our codebase
due to complex interactions with TS compiler which spawned
thread for each encountered .wasm import.
This commit removes:
- cli/compilers/wasm.rs
- cli/compilers/wasm_wrap.js
- two integration tests related to .wasm imports
This commit updates "deno_typescript" crate to properly map
bundle entrypoint file to internal specifier.
All import specifiers were remapped from "file:///a/b/c.ts" to
"$deno$/a/b/c.ts", but that was not the case for entrypoint file
"main.ts" and "compiler.ts".
Because of that internal stack traces were inconsistent; showing
"file:///some/random/path/on/ci/machine.ts" URL in frames that
originate from "main.ts" or "compiler.ts" and "$deno$/file.ts"
for all other imports.
This PR removes op_cache and refactors how Deno interacts with TS compiler.
Ultimate goal is to completely sandbox TS compiler worker; it should operate on
simple request -> response basis. With this commit TS compiler no longer
caches compiled sources as they are generated but rather collects all sources
and sends them back to Rust when compilation is done.
Additionally "Diagnostic" and its children got refactored to use "Deserialize" trait
instead of manually implementing JSON deserialization.
The issue is solved by proxying websocket messages over a pair of
`futures::mpsc::unbounded` channels. As these are are implemented in
the 'futures' crate, they can't participate in Tokio's cooperative
task yielding.
refactor: Parse URLs more sequentially. This makes it easier to change matching behaviour depending on the protocol.
fix: Fail when a host isn't given for certain protocols.
fix: Convert back-slashes info forward-slashes.
This PR removes the hack in CLI that allows to run scripts with shorthand: deno script.ts.
Removing this functionality because it hacks around short-comings of clap our CLI parser. We agree that this shorthand syntax is desirable, but it needs to be rethinked and reimplemented. For 1.0 we should go with conservative approach that is correct.
This PR adds prepare_load hook method to ModuleLoader trait. It allows implementors to perform preparation work before starting actual module loading into isolate. It's meant to be used in CLI; where "transpilation" step will be explicitly performed during prepare_load instead of doing it adhoc for each module if needed.
Keep in mind Buffer.toString() still exists, but returns [object Object].
Reason for removal of Buffer.toString() was that it implicitly used
TextDecoder with fixed "utf-8" encoding and no way to customize
the encoding.
This change is to prevent needed a separate stat syscall for each file
when using readdir.
For consistency, this PR also modifies std's `WalkEntry` interface to
extend `DirEntry` with an additional `path` field.
This commit removes "combined" interfaces from cli/js/io.ts; in the
like of "ReadCloser", "WriteCloser" in favor of using intersections
of concrete interfaces.
Changed `URL.port` implementation to match [WHATWG
specifications](https://url.spec.whatwg.org/#port-state).
This PR matches the behaviour of other browsers:
1. a `TypeError` must be thrown when passing an URL with an invalid
port to the constructor.
2. When setting an invalid port, using property setter, I haven't found
what should happen in this case, so I mimic **Firefox** & **Node**
behaviour. If an invalid port is set, it will use the previous value.
**Chrome** sets the value to `'0'` if an invalid port is set. I prefer
to keep the previous valid value. (I can use Chrome's behaviour if you
think it's better, it's a simple value change)
```
url.port = '3000'; // valid
url.port = 'deno'; // invalid
assertEquals(url.port, '3000');
```
3. If the port value equals the current protocol default port value,
`port` will be an empty string.
When creating a console instance, one must pass "printFunc" arg
which is used internally by Console to output messages.
Due to numerous refactors there was a single method ("console.clear()")
that used "Deno.stdout" instead of "printFunc".
This commit unifies how "Console" outpus message, by using
"printFunc" in all methods; consequently "Deno.stdout" is no longer
imported in "cli/js/console.ts" making it a standalone module that doesn't
depend on any CLI-specific APIs.
Deno.runTests() interface is not yet good enough to be exposed
publicly with stability guarantees.
This commit removes public API related to testing: Deno.runTests()
and Deno.TestMessage, but keeps them exposed on Deno.internal object
so they can be used with "deno test" subcommand.
* Allows union and intersection types to have same multi-line behaviour as arguments (more like prettier).
* Stops line breaks before `extends` in conditional type, which would have been a parser error.
* Check for `// dprint-ignore-file` comment before parsing. This allow files that panic in swc to be ignored.
* Fixes a bug in "multi-line" detection.
Refactors Event and EventTarget so that they better encapsulate their
non-public data as well as are more forward compatible with things like
DOM Nodes.
Moves `dom_types.ts` -> `dom_types.d.ts` which was always the intention,
it was a legacy of when we used to build the types from the code and the
limitations of the compiler. There was a lot of cruft in `dom_types`
which shouldn't have been there, and mis-alignment to the DOM standards.
This generally has been eliminated, though we still have some minor
differences from the DOM (like the removal of some deprecated
methods/properties).
Adds `DOMException`. Strictly it shouldn't inherit from `Error`, but
most browsers provide a stack trace when one is thrown, so the behaviour
in Deno actually better matches the browser.
`Event` still doesn't log to console like it does in the browser. I
wanted to get this raised and that could be an enhancement later on (it
currently doesn't either).
- Removes the __fetch namespace from `deno types`
- Response.redirect should be a static.
- Response.body should not be AsyncIterable.
- Disables the deno_proxy benchmark
- Makes std/examples/curl.ts buffer the body before printing to stdout
Fixes #4000 and fixes #4476. Now always tries to fetch reference types
for JS files. Does not throw if it fails, since Typescript compiler will
complain if the file is not there(it will try to fetch it again first)
and people who just use JS should not be bothered by this error.
Not sure about my test, it passes and catches the bug but maybe there is
a better way to express it.
* Reduce "testing" interfaces
* Use a callback instead of a generator for Deno.runTests()
* Default RunTestsOptions::reportToConsole to true
* Compose TestMessage into a single interface
* Properly track isFile, isSymlink, isDirectory
These don't exhaust all the possibilities, so none of them should be
defined as "neither of the others".
* empty
1. Array elements are now grouped the same as in Node.js
2. Limit to 100 (Node.js default) elements to display in iterable
3. Print each element in new line if excessing max line length (same as in Node.js)
4. Print length of the TypedArray
5. Print information about empty items in Array
This is a first pass implementation which is still missing several important
features:
- support for --inspect-brk (#4503)
- support for source maps (#4501)
- support for piping console.log to devtools console (#4502)
Co-authored-by: Bert Belder <bertbelder@gmail.com>
Co-authored-by: Matt Harrison <mt.harrison86@gmail.com>
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
* Remove DENO_BUILD_MODE and DENO_BUILD_PATH
Also remove outdated docs related to ninja/gn.
* fix
* remove parameter to build_mode()
* remove arg parsing from benchmark.py
This a complex boring PR that shifts around code (primarily) in cli/fs.rs and
cli/ops/fs.rs. The gain of this refactoring is to ease the way for #4188 and
#4017, and also to avoid some future development pain.
Mostly there is no change in functionality. Except:
* squashed bugs where op_utime and op_chown weren't using `resolve_from_cwd`
* eliminated the use of the external `remove_dir_all` crate.
* op_chmod now only queries metadata to verify file/dir exists on Windows (it
will already fail on Unix if it doesn't)
* op_chown now verifies the file/dir's existence on Windows like chmod does.
* add tests for "Deno.core.encode" and "Deno.core.decode" for empty inputs
* use "Deno.core.encode" in "TextEncoder"
* use "Deno.core.decode" in "TextDecoder"
* remove "core_decode" and "core_encode" benchmarks
After splitting "failFast" and "exitOnFail" arguments, there was a situation where failing tests did not exit with code 1.
* fixed argument value passed to Deno.runTests() in deno test
* fixed argument value passed to Deno.runTests() in std/testing/runner.ts
* added integration tests for deno test to ensure failFast and exitOnFail work as expected
* don't write test file to file system, but keep it in memory
This PR brings assertOps and assertResources sanitizers to Deno.test() API.
assertOps checks that test doesn't leak async ops, ie. there are no unresolved
promises originating from Deno APIs. Enabled by default, can be disabled using
Deno.TestDefinition.disableOpSanitizer.
assertResources checks that test doesn't leak resources, ie. all resources used
in test are closed. For example; if a file is opened during a test case it must be
explicitly closed before test case finishes. It's most useful for asynchronous
generators. Enabled by default, can be disabled using
Deno.TestDefinition.disableResourceSanitizer.
We've used those sanitizers in internal runtime tests and it proved very useful in
surfacing incorrect tests which resulted in interference between the tests.
All tests have been sanitized.
Closes #4208
Fixes #4101
Previously, we would just provide the raw JSON to the TypeScript
compiler worker, but TypeScript does not transform JSON. This caused
a problem when emitting a bundle, that the JSON would just be "inlined"
into the output, instead of being transformed into a module.
This fixes this problem by providing the compiled JSON to the TypeScript
compiler, so TypeScript just sees JSON as a "normal" TypeScript module.
This PR attempts to fix intermittent errors occurring on Windows for "cli/tests/unit_test_runner.ts." Runner has been reworked to create only single TCP listener instead of one listener per worker.
Additionally worker doesn't close TCP socket - it waits for parent process to close the socket and only then exits.
This commit changes output of default test reporter to resemble output from Rust test runner;
first the name of running test is printed with "...", then after test has run result is printed on the same line.
* Split "Deno.TestEvent.Result" into "TestStart" and "TestEnd";
* changes TestReporter interface to support both events;
Co-authored-by: Ryan Dahl <ry@tinyclouds.org>
This commits add two new methods to "Deno.core" namespace: "encode" and "decode".
Those methods are bound in Rust to provide a) fast b) generally available of encoding and decoding UTF-8 strings.
Both methods are now used in "cli/js/dispatch_json.ts".
* drop server guard before unit test result check
To prevent cascading test failures when js_unit_test http server
guard is dropped before asserting that tests were successful.
This is really a band-aid and doesn't solve underlying issue with
http server.
* Update CLI for unit_test_runner.ts
* Change cli/js/tests/unit_test_runner.ts command line interface to work in 3
modes:
- "one-off" - run tests that match permissions of currently running
process
- "master" - run tests for all possible permission combinations, by
spawning subprocesses running in "worker" mode and communicating via
TCP socket; requires elevated permissions
- "worker" - run tests for set of permissions provided by CLI arg;
requires elevated permissions to setup TCP connection to "master";
after initial setup process drops permissions to given set
* Support filtering of tests by string passed after "--" CLI arg
* Update cli/js/tests/README.md
Rewrites "cli/js/unit_test_runner.ts" to communicate with spawned subprocesses
using TCP socket.
* Rewrite "Deno.runTests()" by factoring out testing logic to private "TestApi"
class. "TestApi" implements "AsyncIterator" that yields "TestEvent"s,
which is an interface for different types of event occuring during running
tests.
* Add "reporter" argument to "Deno.runTests()" to allow users to provide custom
reporting mechanism for tests. It's represented by "TestReporter" interface,
that implements hook functions for each type of "TestEvent". If "reporter"
is not provided then default console reporting is used (via
"ConsoleReporter").
* Change how "unit_test_runner" communicates with spawned suprocesses. Instead
of parsing text data from child's stdout, a TCP socket is created and used
for communication. "unit_test_runner" can run in either "master" or "worker"
mode. Former is responsible for test discovery and establishing needed
permission combinations; while latter (that is spawned by "master") executes
tests that match given permission set.
* Use "SocketReporter" that implements "TestReporter" interface to send output
of tests to "master" process. Data is sent as stringified JSON and then
parsed by "master" as structured data. "master" applies it's own reporting
logic to output tests to console (by reusing default "ConsoleReporter").
