This is the release commit being forwarded back to main for 1.41.2
Signed-off-by: Divy Srivastava <dj.srivastava23@gmail.com>
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
<!--
Before submitting a PR, please read
https://docs.deno.com/runtime/manual/references/contributing
1. Give the PR a descriptive title.
Examples of good title:
- fix(std/http): Fix race condition in server
- docs(console): Update docstrings
- feat(doc): Handle nested reexports
Examples of bad title:
- fix #7123
- update docs
- fix bugs
2. Ensure there is a related issue and it is referenced in the PR text.
3. Ensure there are tests that cover the changes.
4. Ensure `cargo test` passes.
5. Ensure `./tools/format.js` passes without changing files.
6. Ensure `./tools/lint.js` passes.
7. Open as a draft PR if your work is still in progress. The CI won't
run
all steps, but you can add '[ci]' to a commit message to force it to.
8. If you would like to run the benchmarks on the CI, add the 'ci-bench'
label.
-->
This commit adds support for source maps for `ext/` crates that are
authored in TypeScript. As a result any exceptions thrown from eg. `ext/node`
will now have correct stack traces.
This is only enabled in debug mode as it adds about 2Mb to the binary.
Improves #19100
Fixes #20356
Replaces #20428
Changes made in deno_core to support this:
- [x] Errors must be handled in setTimeout callbacks
- [x] Microtask ordering is not-quite-right
- [x] Timer cancellation must be checked right before dispatch
- [x] Timer sanitizer
- [x] Move high-res timer to deno_core
- [x] Timers need opcall tracing
- Removes the origin call, since all origins are the same for an isolate
(ie: the main module)
- Collects the `TestDescription`s and sends them all at the same time
inside of an Arc, allowing us to (later on) re-use these instead of
cloning.
Needs a follow-up pass to remove all the cloning, but that's a thread
that is pretty long to pull
---------
Signed-off-by: Matt Mastracci <matthew@mastracci.com>
If we strip out unprintable chars, we don't see the full filename being
requested by permission prompts. Instead, we highlight and escape them
to make them visible.
This commit removes some not really necessary FFI tests and in effect
removes them from being accessible from the user code.
This lowers the number of ops accessible to user code to 16.
This moves the op sanitizer descriptions into Rust code and prepares for
eventual op import from `ext:core/ops`. We cannot import these ops from
`ext:core/ops` as the testing infrastructure ops are not always present.
Changes:
- Op descriptions live in `cli` code and are currently accessible via an
op for the older sanitizer code
- `phf` dep moved to workspace root so we can use it here
- `ops.op_XXX` changed to to `op_XXX` to prepare for op imports later
on.
Migrations:
- Error registration no longer required for Interrupted or BadResource
(these are core exception)
- `include_js_files!`/`ExtensionFileSource` changes
This commit adds a list of ops to `runtime/99_main.js` that are
currently relying on getting them from `Deno.core.ops`. All ops that are not
present in the list are removed from `Deno.core.ops` on startup (they are
imported from "virtual op module" - `ext:core/ops`) making them effectively
inaccessible to user code.
This change lowers the number of ops exposed to user code from 650 to
around 260. This number should be gradually decreased in follow-up PRs.
Follow up to #22157.
This leaves us with 4 usages of `ensureFastOps()` in `deno` itself.
There's also about 150 usages of `Deno.core.ops.<op_name>` left as well.
For removal in Deno v2. I've also updated the deprecation of
`Deno.FsWatcher.return()`, which, to be clear, I'm not in favour of
deprecating. I mention this in #15499. Either way, it's safe to merge
this PR, then decide against the deprecation.
Removes weird "frame like" characters and simplifies the output:
```
warning: Use of deprecated "Deno.isatty()" API. This API will be removed in Deno 2.
Stack trace:
at file:///Users/ib/dev/deno/foo.js:2:8
hint: Use `stdStream.isTerminal()` instead.
warning: Use of deprecated "Deno.isatty()" API. This API will be removed in Deno 2.
Stack trace:
at file:///Users/ib/dev/deno/foo.js:7:8
hint: Use `stdStream.isTerminal()` instead.
```
https://github.com/denoland/deno/assets/13602871/7a6e24bf-44ec-4dbf-ac96-2af1db9f2ab9
This commit deprecates `window` global and adds deprecation
notice on each use of `window`.
We decided to proceed with removal of `window` global variable in Deno
2.0. There's a lot of code
in the wild that uses pattern like this:
```
if (typeof window !== "undefined) {
...
}
```
to check if the code is being run in browser. However, this check passes
fine in Deno and
most often libraries that do this check try to access some browser API
that is not available
in Deno, or use DOM APIs (which are also not available in Deno).
This situation has occurred multiple times already
and it's unfeasible to expect the whole ecosystem to migrate to new
check (and even if that
happened there's a ton of code that's already shipped and won't change).
The migration is straightfoward - replace all usages of `window` with
`globalThis` or `self`.
When Deno encounters use of `window` global it will now issue a warning,
steering users
towards required changes:
```
Warning
├ Use of deprecated "window" API.
│
├ This API will be removed in Deno 2.0. Make sure to upgrade to a stable API before then.
│
├ Suggestion: Use `globalThis` or `self` instead.
│
├ Suggestion: You can provide `window` in the current scope with: `const window = globalThis`.
│
└ Stack trace:
└─ at file:///Users/ib/dev/deno/foo.js:7:1
```
Ref https://github.com/denoland/deno/issues/13367.
Most uses of `Deno.resources()` within tests, as they previously checked
for leaked resources. This is not needed as the test runner does this
automatically. Other internal uses of this API have been replaced with
the internal `Deno[Deno.internal].core.resources()`.
This change:
1. Implements `Deno.stdin.isTerminal()`, `Deno.stdout.isTerminal()` and
`Deno.stderr.isTerminal()`.
2. Deprecates `Deno.isatty()` for removal in Deno v2, in favour of the
above instance methods.
3. Replaces use of `Deno.isatty()` with the above instance methods.
Related #21995
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
This change sets the removal version of `Deno.customInspect` for Deno
v2.
Towards #22021
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This initially uses the new diagnostic printer in `deno lint`,
`deno doc` and `deno publish`. In the limit we should also update
`deno check` to use this printer.
This commit deprecates "--unstable" flag.
When "--unstable" flag is encountered a warning like this is printed:
```
The `--unstable` flag is deprecated, use granular `--unstable-*` flags instead.
Learn more at: https://docs.deno.com/runtime/manual/tools/unstable_flags
```
When "--unstable" flag is used and an unstable API is called an
additional warning like this is printed for each API call:
```
The `Deno.dlopen` API was used with `--unstable` flag. The `--unstable` flag is deprecated, use granular `--unstable-ffi` instead.
Learn more at: https://docs.deno.com/runtime/manual/tools/unstable_flags
```
When no "--unstable-*" flag is provided and an unstable API is called
following
warning is issued before exiting:
```
Unstable API 'Deno.dlopen'. The `--unstable-ffi` flag must be provided.
```
---------
Signed-off-by: Divy Srivastava <dj.srivastava23@gmail.com>
Signed-off-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
Co-authored-by: Asher Gomez <ashersaupingomez@gmail.com>
This change:
1. Sets the removal version for `Deno.RequestEvent`, `Deno.HttpConn` and
`Deno.serveHttp()` for Deno v2. I thought it might be worth calling
`warnOnDeprecatedApi()` within `Deno.Request` and `Deno.HttpConn`
methods, but I thought just having it called within `Deno.serveHttp()`
might be sufficient.
2. Removes some possibly unneeded related benchmarks.
Towards #22021
Closes https://github.com/denoland/deno/issues/21828.
This API is a huge footgun. And given that "Deno.serveHttp" is a
deprecated API that is discouraged to use (use "Deno.serve()"
instead); it makes no sense to keep this API around.
This is a step towards fully migrating to Hyper 1.
Fixes #21928.
We have a code path which empties the extension sources because they're
expected to be pre-executed in the snapshot. Instead of using
conditional compilation for that, we now just check if a snapshot was
provided.
Removes the `dont_use_runtime_snapshot` feature. We didn't allow not
providing a snapshot unless this feature was provided, now we always do.
Adds the `only_snapshotted_js_sources` feature for us to use in CLI.
This asserts that a snapshot is provided and gates the runtime
transpilation code so it isn't included in the executable.
This commit introduces deprecation warnings for "Deno.*" APIs.
This is gonna be quite noisy, but should tremendously help with user
code updates to ensure
smooth migration to Deno 2.0. The warning is printed at each unique call
site to help quickly
identify where code needs to be adjusted. There's some stack frame
filtering going on to
remove frames that are not useful to the user and would only cause
confusion.
The warning can be silenced using "--quiet" flag or
"DENO_NO_DEPRECATION_WARNINGS" env var.
"Deno.run()" API is now using this warning. Other deprecated APIs will
start warning
in follow up PRs.
Example:
```js
import { runEcho as runEcho2 } from "http://localhost:4545/run/warn_on_deprecated_api/mod.ts";
const p = Deno.run({
cmd: [
Deno.execPath(),
"eval",
"console.log('hello world')",
],
});
await p.status();
p.close();
async function runEcho() {
const p = Deno.run({
cmd: [
Deno.execPath(),
"eval",
"console.log('hello world')",
],
});
await p.status();
p.close();
}
await runEcho();
await runEcho();
for (let i = 0; i < 10; i++) {
await runEcho();
}
await runEcho2();
```
```
$ deno run --allow-read foo.js
Warning
├ Use of deprecated "Deno.run()" API.
│
├ This API will be removed in Deno 2.0. Make sure to upgrade to a stable API before then.
│
├ Suggestion: Use "Deno.Command()" API instead.
│
└ Stack trace:
└─ at file:///Users/ib/dev/deno/foo.js:3:16
hello world
Warning
├ Use of deprecated "Deno.run()" API.
│
├ This API will be removed in Deno 2.0. Make sure to upgrade to a stable API before then.
│
├ Suggestion: Use "Deno.Command()" API instead.
│
└ Stack trace:
├─ at runEcho (file:///Users/ib/dev/deno/foo.js:8:18)
└─ at file:///Users/ib/dev/deno/foo.js:13:7
hello world
Warning
├ Use of deprecated "Deno.run()" API.
│
├ This API will be removed in Deno 2.0. Make sure to upgrade to a stable API before then.
│
├ Suggestion: Use "Deno.Command()" API instead.
│
└ Stack trace:
├─ at runEcho (file:///Users/ib/dev/deno/foo.js:8:18)
└─ at file:///Users/ib/dev/deno/foo.js:14:7
hello world
Warning
├ Use of deprecated "Deno.run()" API.
│
├ This API will be removed in Deno 2.0. Make sure to upgrade to a stable API before then.
│
├ Suggestion: Use "Deno.Command()" API instead.
│
└ Stack trace:
├─ at runEcho (file:///Users/ib/dev/deno/foo.js:8:18)
└─ at file:///Users/ib/dev/deno/foo.js:17:9
hello world
hello world
hello world
hello world
hello world
hello world
hello world
hello world
hello world
hello world
Warning
├ Use of deprecated "Deno.run()" API.
│
├ This API will be removed in Deno 2.0. Make sure to upgrade to a stable API before then.
│
├ Suggestion: Use "Deno.Command()" API instead.
│
├ Suggestion: It appears this API is used by a remote dependency.
│ Try upgrading to the latest version of that dependency.
│
└ Stack trace:
├─ at runEcho (http://localhost:4545/run/warn_on_deprecated_api/mod.ts:2:18)
└─ at file:///Users/ib/dev/deno/foo.js:20:7
hello world
```
Closes #21839
This commit adds support for [Stage 3 Temporal API
proposal](https://tc39.es/proposal-temporal/docs/).
The API is available when `--unstable-temporal` flag is passed.
---------
Signed-off-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Co-authored-by: David Sherret <dsherret@gmail.com>
Co-authored-by: Kenta Moriuchi <moriken@kimamass.com>
This commit adds support for "rejectionhandled" Web Event and
"rejectionHandled" Node event.
```js
import process from "node:process";
process.on("rejectionHandled", (promise) => {
console.log("rejectionHandled", reason, promise);
});
window.addEventListener("rejectionhandled", (event) => {
console.log("rejectionhandled", event.reason, event.promise);
});
```
---------
Co-authored-by: Matt Mastracci <matthew@mastracci.com>
<!--
Before submitting a PR, please read https://deno.com/manual/contributing
1. Give the PR a descriptive title.
Examples of good title:
- fix(std/http): Fix race condition in server
- docs(console): Update docstrings
- feat(doc): Handle nested reexports
Examples of bad title:
- fix #7123
- update docs
- fix bugs
2. Ensure there is a related issue and it is referenced in the PR text.
3. Ensure there are tests that cover the changes.
4. Ensure `cargo test` passes.
5. Ensure `./tools/format.js` passes without changing files.
6. Ensure `./tools/lint.js` passes.
7. Open as a draft PR if your work is still in progress. The CI won't
run
all steps, but you can add '[ci]' to a commit message to force it to.
8. If you would like to run the benchmarks on the CI, add the 'ci-bench'
label.
-->
---------
Signed-off-by: Matt Mastracci <matthew@mastracci.com>
Co-authored-by: Matt Mastracci <matthew@mastracci.com>
Part 1 of #21713
Changes:
- Remove `.present()` and add a `presentGPUCanvasContext` (not exposed
yet to users)
- Move lazy load logic to `00_init.js`. This can be used to use webgpu
on-demand from future code (OffScreenCanvas)
Harden the code that does permission checks to protect against
re-opening of stdin.
Code that runs FFI is vulnerable to an attack where fd 0 is closed
during a permission check and re-opened with a file that contains a
positive response (ie: `y` or `A`). While FFI code is dangerous in
general, we can make it more difficult for FFI-enabled code to bypass
additional permission checks.
- Checks to see if the underlying file for stdin has changed from the
start to the end of the permission check (detects races)
- Checks to see if the message is excessively long (lowering the window
for races)
- Checks to see if stdin and stderr are still terminals at the end of
the function (making races more difficult)
Main change is that:
- "hyper" has been renamed to "hyper_v014" to signal that it's legacy
- "hyper1" has been renamed to "hyper" and should be the default
`opAsync` requires a lookup by name on each async call. This is a
mechanical translation of all opAsync calls to ensureFastOps.
The `opAsync` API on Deno.core will be removed at a later time.
This PR implements the child_process IPC pipe between parent and child.
The implementation uses Windows named pipes created by parent and passes
the inheritable file handle to the child.
I've also replace parts of the initial implementation which passed the
raw parent fd to JS with resource ids instead. This way no file handle
is exposed to the JS land (both parent and child).
`IpcJsonStreamResource` can stream upto 800MB/s of JSON data on Win 11
AMD Ryzen 7 16GB (without `memchr` vectorization)
Bumped versions for 1.39.0
Please ensure:
- [x] Target branch is correct (`vX.XX` if a patch release, `main` if
minor)
- [x] Crate versions are bumped correctly
- [x] deno_std version is incremented in the code (see
`cli/deno_std.rs`)
- [x] Releases.md is updated correctly (think relevancy and remove
reverts)
To make edits to this PR:
```shell
git fetch upstream release_1_39.0 && git checkout -b release_1_39.0 upstream/release_1_39.0
```
cc @mmastrac
---------
Co-authored-by: mmastrac <mmastrac@users.noreply.github.com>
Co-authored-by: Matt Mastracci <matthew@mastracci.com>
This PR implements the Node child_process IPC functionality in Deno on
Unix systems.
For `fd > 2` a duplex unix pipe is set up between the parent and child
processes. Currently implements data passing via the channel in the JSON
serialization format.
This fixes #21434 for `BroadcastChannel` and `WebSocketStream`.
`--unstable` still enable both, but granular unstable flags now also
work:
* `--unstable-net` now enables `WebSocketStream`.
* `--unstable-broadcast-channel` now enables `BroadcastChannel`.
* Additionally, there are now tests for all granular unstable flags.
Since `unsafe-proto` already had tests, so I didn't add any for this
one.
It also introduces a map to keep track of granular unstable ids without
having to sync multiple places.
This commit brings back usage of primordials in "40_testing.js" by
turning it back into an ES module and using new "lazy loading" functionality
of ES modules coming from "deno_core".
The same approach was applied to "40_jupyter.js".
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This commit refactors how we access "core", "internals" and
"primordials" objects coming from `deno_core`, in our internal JavaScript code.
Instead of capturing them from "globalThis.__bootstrap" namespace, we
import them from recently added "ext:core/mod.js" file.
Landing changes required for
https://github.com/denoland/deno_core/pull/359
We needed to update 99_main.js and a whole load of tests.
API changes:
- setPromiseRejectCallback becomes setUnhandledPromiseRejectionHandler.
The function is now called from eventLoopTick.
- The promiseRejectMacrotaskCallback no longer exists, as this is
automatically handled in eventLoopTick.
- ops.op_dispatch_exception now takes a second parameter: in_promise.
The preferred way to call this op is now reportUnhandledException or
reportUnhandledPromiseRejection.
This commit removes some of the technical debt related
to snapshotting JS code:
- "cli/ops/mod.rs" and "cli/build.rs" no longer define "cli" extension
which was not required anymore
- Cargo features for "deno_runtime" crate have been unified in
"cli/Cargo.toml"
- "cli/build.rs" uses "deno_runtime::snapshot::create_runtime_snapshot"
API
instead of copy-pasting the code
- "cli/js/99_main.js" was completely removed as it's not necessary
anymore
Towards https://github.com/denoland/deno/issues/21137
Fixes #21121 and #19498
Migrates fully to rustls_tokio_stream. We no longer need to maintain our
own TlsStream implementation to properly support duplex.
This should fix a number of errors with TLS and websockets, HTTP and
"other" places where it's failing.
We only want one zlib dependency.
Zlib dependencies are reorganized so they use a hidden
`__vendored_zlib_ng` flag in cli that enables zlib-ng for both libz-sys
(used by ext/node) and flate2 (used by deno_web).
This is the release commit being forwarded back to main for 1.38.1
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
Co-authored-by: littledivy <littledivy@users.noreply.github.com>
We can move all promise ID knowledge to deno_core, allowing us to better
experiment with promise implementation in deno_core.
`{un,}refOpPromise(promise)` is equivalent to
`{un,}refOp(promise[promiseIdSymbol])`
This commit adds granular `--unstable-*` flags:
- "--unstable-broadcast-channel"
- "--unstable-ffi"
- "--unstable-fs"
- "--unstable-http"
- "--unstable-kv"
- "--unstable-net"
- "--unstable-worker-options"
- "--unstable-cron"
These flags are meant to replace a "catch-all" flag - "--unstable", that
gives a binary control whether unstable features are enabled or not. The
downside of this flag that allowing eg. Deno KV API also enables the FFI
API (though the latter is still gated with a permission).
These flags can also be specified in `deno.json` file under `unstable`
key.
Currently, "--unstable" flag works the same way - I will open a follow
up PR that will print a warning when using "--unstable" and suggest to use
concrete "--unstable-*" flag instead. We plan to phase out "--unstable"
completely in Deno 2.
This PR adds unstable `Deno.cron` API to trigger execution of cron jobs.
* State: All cron state is in memory. Cron jobs are scheduled according
to the cron schedule expression and the current time. No state is
persisted to disk.
* Time zone: Cron expressions specify time in UTC.
* Overlapping executions: not permitted. If the next scheduled execution
time occurs while the same cron job is still executing, the scheduled
execution is skipped.
* Retries: failed jobs are automatically retried until they succeed or
until retry threshold is reached. Retry policy can be optionally
specified using `options.backoffSchedule`.
This commit updates the ext/kv module to use the denokv_* crates for
the protocol and the sqlite backend. This also fixes a couple of bugs in
the sqlite backend, and updates versionstamps to be updated less
linearly.
Rewrites 3 ops that used "op(deferred)" to use "op2(async(lazy))"
instead.
This will allow us to remove codepath for handling "deferred" ops in
"deno_core".
Closes #14122.
Adds two extensions to `--allow-run` behaviour:
- When `--allow-run=foo` is specified and `foo` is found in the `PATH`
at startup, `RunDescriptor::Path(which("foo"))` is added to the
allowlist alongside `RunDescriptor::Name("foo")`. Currently only the
latter is.
- When run permission for `foo` is queried and `foo` is found in the
`PATH` at runtime, either `RunDescriptor::Path(which("foo"))` or
`RunDescriptor::Name("foo")` would qualify in the allowlist. Currently
only the latter does.
Adds `runtime/shared.rs` which is imported by both `build.rs` and the
rest of the crate, containing utilities used by both.
Renames the `snapshot_from_snapshot` feature to
`exclude_runtime_main_js` since that's what it does and it's relevant
outside of snapshotting when `__runtime_js_sources` is specified.
<!--
Before submitting a PR, please read https://deno.com/manual/contributing
1. Give the PR a descriptive title.
Examples of good title:
- fix(std/http): Fix race condition in server
- docs(console): Update docstrings
- feat(doc): Handle nested reexports
Examples of bad title:
- fix #7123
- update docs
- fix bugs
2. Ensure there is a related issue and it is referenced in the PR text.
3. Ensure there are tests that cover the changes.
4. Ensure `cargo test` passes.
5. Ensure `./tools/format.js` passes without changing files.
6. Ensure `./tools/lint.js` passes.
7. Open as a draft PR if your work is still in progress. The CI won't
run
all steps, but you can add '[ci]' to a commit message to force it to.
8. If you would like to run the benchmarks on the CI, add the 'ci-bench'
label.
-->
As the title.
---------
Co-authored-by: Matt Mastracci <matthew@mastracci.com>
This patch adds a `remote` backend for `ext/kv`. This supports
connection to Deno Deploy and potentially other services compatible with
the KV Connect protocol.
To fix bugs around detection of when node emulation is required, we will
just eagerly initialize it. The improvements we make to reduce the
impact of the startup time:
- [x] Process stdin/stdout/stderr are lazily created
- [x] node.js global proxy no longer allocates on each access check
- [x] Process checks for `beforeExit` listeners before doing expensive
shutdown work
- [x] Process should avoid adding global event handlers until listeners
are added
Benchmarking this PR (`89de7e1ff`) vs main (`41cad2179`)
```
12:36 $ third_party/prebuilt/mac/hyperfine --warmup 100 -S none './deno-41cad2179 run ./empty.js' './deno-89de7e1ff run ./empty.js'
Benchmark 1: ./deno-41cad2179 run ./empty.js
Time (mean ± σ): 24.3 ms ± 1.6 ms [User: 16.2 ms, System: 6.0 ms]
Range (min … max): 21.1 ms … 29.1 ms 115 runs
Benchmark 2: ./deno-89de7e1ff run ./empty.js
Time (mean ± σ): 24.0 ms ± 1.4 ms [User: 16.3 ms, System: 5.6 ms]
Range (min … max): 21.3 ms … 28.6 ms 126 runs
```
Fixes https://github.com/denoland/deno/issues/20142
Fixes https://github.com/denoland/deno/issues/15826
Fixes https://github.com/denoland/deno/issues/20028
Closes #19399 (running without snapshots at all was suggested as an
alternative solution).
Adds a `__runtime_js_sources` pseudo-private feature to load extension
JS sources at runtime for faster development, instead of building and
loading snapshots or embedding sources in the binary. Will only work in
a development environment obviously.
Try running `cargo test --features __runtime_js_sources
integration::node_unit_tests::os_test`. Then break some behaviour in
`ext/node/polyfills/os.ts` e.g. make `function cpus() {}` return an
empty array, and run it again. Fix and then run again. No more build
time in between.
This commit adds new "--deny-*" permission flags. These are complimentary to
"--allow-*" flags.
These flags can be used to restrict access to certain resources, even if they
were granted using "--allow-*" flags or the "--allow-all" ("-A") flag.
Eg. specifying "--allow-read --deny-read" will result in a permission error,
while "--allow-read --deny-read=/etc" will allow read access to all FS but the
"/etc" directory.
Runtime permissions APIs ("Deno.permissions") were adjusted as well, mainly
by adding, a new "PermissionStatus.partial" field. This field denotes that
while permission might be granted to requested resource, it's only partial (ie.
a "--deny-*" flag was specified that excludes some of the requested resources).
Eg. specifying "--allow-read=foo/ --deny-read=foo/bar" and then querying for
permissions like "Deno.permissions.query({ name: "read", path: "foo/" })"
will return "PermissionStatus { state: "granted", onchange: null, partial: true }",
denoting that some of the subpaths don't have read access.
Closes #18804.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Co-authored-by: Nayeem Rahman <nayeemrmn99@gmail.com>
This addresses issue #19918.
## Issue description
Event messages have the wrong isTrusted value when they are not
triggered by user interaction, which differs from the browser. In
particular, all MessageEvents created by Deno have isTrusted set to
false, even though it should be true.
This is my first ever contribution to Deno, so I might be missing
something.
Code run within Deno-mode and Node-mode should have access to a
slightly different set of globals. Previously this was done through a
compile time code-transform for Node-mode, but this is not ideal and has
many edge cases, for example Node's globalThis having a different
identity than Deno's globalThis.
This commit makes the `globalThis` of the entire runtime a semi-proxy.
This proxy returns a different set of globals depending on the caller's
mode. This is not a full proxy, because it is shadowed by "real"
properties on globalThis. This is done to avoid the overhead of a full
proxy for all globalThis operations.
The globals between Deno-mode and Node-mode are now properly segregated.
This means that code running in Deno-mode will not have access to Node's
globals, and vice versa. Deleting a managed global in Deno-mode will
NOT delete the corresponding global in Node-mode, and vice versa.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Co-authored-by: Aapo Alasuutari <aapo.alasuutari@gmail.com>
Currently the resolution for extension sources is different depending on
whether `include_js_files_for_snapshotting`
is enabled. If sources are embedded it uses `include_str!()` which is
module-relative. If sources are read at runtime paths are joined to
`CARGO_MANIFEST_DIR` and are package-relative. This makes them both
package-relative.
Fixes `cargo run -p deno_runtime --example extension_with_esm --features
include_js_files_for_snapshotting`.
…nclusion" (#19519)"
This reverts commit 28a4f3d0f5.
This change causes failures when used outside Deno repo:
```
============================================================
Deno has panicked. This is a bug in Deno. Please report this
at https://github.com/denoland/deno/issues/new.
If you can reliably reproduce this panic, include the
reproduction steps and re-run with the RUST_BACKTRACE=1 env
var set and include the backtrace in your report.
Platform: linux x86_64
Version: 1.34.3+b37b286
Args: ["/opt/hostedtoolcache/deno/0.0.0-b37b286f7fa68d5656f7c180f6127bdc38cf2cf5/x64/deno", "test", "--doc", "--unstable", "--allow-all", "--coverage=./cov"]
thread 'main' panicked at 'called `Result::unwrap()` on an `Err` value: Failed to read "/home/runner/work/deno/deno/core/00_primordials.js"
Caused by:
No such file or directory (os error 2)', core/runtime/jsruntime.rs:699:8
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
```
Relands #19463. This time the `ExtensionFileSourceCode` enum is
preserved, so this effectively just splits feature
`include_js_for_snapshotting` into `exclude_js_sources` and
`runtime_js_sources`, adds a `force_include_js_sources` option on
`extension!()`, and unifies `ext::Init_ops_and_esm()` and
`ext::init_ops()` into `ext::init()`.
`ZeroCopyBuf` was convenient to use, but sometimes it did hide details
that some copies were necessary in certain cases. Also it made it way to easy
for the caller to pass around and convert into different values. This commit
splits `ZeroCopyBuf` into `JsBuffer` (an array buffer coming from V8) and
`ToJsBuffer` (a Rust buffer that will be converted into a V8 array buffer).
As a result some magical conversions were removed (they were never used)
limiting the API surface and preparing for changes in #19534.
A few easy migrations of module code from the runtime to the module map.
The module map already has a few places where it needs a handle scope,
so we're not coupling it any further with the v8 runtime.
`init_runtime_module_map` is replaced with an option to reduce API
surface of JsRuntime.
`module_resolve_callback` now lives in the `ModuleMap` and we use a
annex data to avoid having to go through the `Rc<RefCell<...>>` stored
in the `JsRuntime`'s isolate.
… (#19463)"
This reverts commit ceb03cfb03.
This is being reverted because it causes 3.5Mb increase in the binary
size,
due to runtime JS code being included in the binary, even though it's
already snapshotted.
CC @nayeemrmn
Remove `ExtensionFileSourceCode::LoadedFromFsDuringSnapshot` and feature
`include_js_for_snapshotting` since they leak paths that are only
applicable in this repo to embedders. Replace with feature
`exclude_js_sources`. Additionally the feature
`force_include_js_sources` allows negating it, if both features are set.
We need both of these because features are additive and there must be a
way of force including sources for snapshot creation while still having
the `exclude_js_sources` feature. `force_include_js_sources` is only set
for build deps, so sources are still excluded from the final binary.
You can also specify `force_include_js_sources` on any extension to
override the above features for that extension. Towards #19398.
But there was still the snapshot-from-snapshot situation where code
could be executed twice, I addressed that by making `mod_evaluate()` and
scripts like `core/01_core.js` behave idempotently. This allowed
unifying `ext::init_ops()` and `ext::init_ops_and_esm()` into
`ext::init()`.
This commit adds ability to print metrics of the Tokio
runtime to the console by passing "DENO_TOKIO_METRICS=1"
env var.
Metrics will be printed every second, but this can be changed
by "DENO_TOKIO_METRICS_INTERVAL=500" env var.
In case you would consider including specific implementations and not
only build fixes, here's the implementation of the ```rss()``` function
for OpenBSD.
Spend quite some time trying to get this working. With proper example
would have been a lot faster. So this is pr with the example. I also
rearranged examples a little bit to allow for addition of more examples
This cleans up `JsRuntime` a bit more:
* We no longer print cargo's rerun-if-changed messages in `JsRuntime` --
those are printed elsewhere
* We no longer special case the OwnedIsolate for snapshots. Instead we
make use of an inner object that has the `Drop` impl and allows us to
`std::mem::forget` it if we need to extract the isolate for a snapshot
* The `snapshot` method is only available on `JsRuntimeForSnapshot`, not
`JsRuntime`.
* `OpState` construction is slightly cleaner, though I'd still like to
extract more
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Rather than disallowing `ext:` resolution, clear the module map after
initializing extensions so extension modules are anonymized. This
operation is explicitly called in `deno_runtime`. Re-inject `node:`
specifiers into the module map after doing this.
Fixes #17717.
This commit fixes emitting "unhandledrejection" event when there are
"node:" or "npm:" imports.
Before this commit the Node "unhandledRejection" event was emitted
using a regular listener for Web "unhandledrejection" event. This
listener was installed before any user listener had a chance to be
installed which effectively prevent emitting "unhandledrejection"
events to user code.
Closes https://github.com/denoland/deno/issues/16928
**THIS PR HAS GIT CONFLICTS THAT MUST BE RESOLVED**
This is the release commit being forwarded back to main for 1.33.4
Please ensure:
- [x] Everything looks ok in the PR
- [ ] The release has been published
To make edits to this PR:
```shell
git fetch upstream forward_v1.33.4 && git checkout -b forward_v1.33.4 upstream/forward_v1.33.4
```
Don't need this PR? Close it.
cc @levex
Co-authored-by: levex <levex@users.noreply.github.com>
Co-authored-by: Levente Kurusa <lkurusa@kernelstuff.org>
Partially supersedes #19016.
This migrates `spawn` and `spawn_blocking` to `deno_core`, and removes
the requirement for `spawn` tasks to be `Send` given our single-threaded
executor.
While we don't need to technically do anything w/`spawn_blocking`, this
allows us to have a single `JoinHandle` type that works for both cases,
and allows us to more easily experiment with alternative
`spawn_blocking` implementations that do not require tokio (ie: rayon).
Async ops (+~35%):
Before:
```
time 1310 ms rate 763358
time 1267 ms rate 789265
time 1259 ms rate 794281
time 1266 ms rate 789889
```
After:
```
time 956 ms rate 1046025
time 954 ms rate 1048218
time 924 ms rate 1082251
time 920 ms rate 1086956
```
HTTP serve (+~4.4%):
Before:
```
Running 10s test @ http://localhost:4500
2 threads and 10 connections
Thread Stats Avg Stdev Max +/- Stdev
Latency 68.78us 19.77us 1.43ms 86.84%
Req/Sec 68.78k 5.00k 73.84k 91.58%
1381833 requests in 10.10s, 167.36MB read
Requests/sec: 136823.29
Transfer/sec: 16.57MB
```
After:
```
Running 10s test @ http://localhost:4500
2 threads and 10 connections
Thread Stats Avg Stdev Max +/- Stdev
Latency 63.12us 17.43us 1.11ms 85.13%
Req/Sec 71.82k 3.71k 77.02k 79.21%
1443195 requests in 10.10s, 174.79MB read
Requests/sec: 142921.99
Transfer/sec: 17.31MB
```
Suggested-By: alice@ryhl.io
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
**THIS PR HAS GIT CONFLICTS THAT MUST BE RESOLVED**
This is the release commit being forwarded back to main for 1.33.3
Please ensure:
- [x] Everything looks ok in the PR
- [x] The release has been published
To make edits to this PR:
```shell
git fetch upstream forward_v1.33.3 && git checkout -b forward_v1.33.3 upstream/forward_v1.33.3
```
Don't need this PR? Close it.
cc @levex
Co-authored-by: Levente Kurusa <lkurusa@kernelstuff.org>
This is the initial support for npm and node specifiers in `deno
compile`. The npm packages are included in the binary and read from it via
a virtual file system. This also supports the `--node-modules-dir` flag,
dependencies specified in a package.json, and npm binary commands (ex.
`deno compile --unstable npm:cowsay`)
Closes #16632
This now allows circular imports across extensions.
Instead of load + eval of all ESM files in declaration order, all files
are only loaded. Eval is done recursively by V8, only evaluating
files that are listed in `Extension::esm_entry_point` fields.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
1. Boxed `File` and `FileSystem` to allow more easily passing this
through the CLI code (as shown within this pr).
2. `StdFileResource` is now `FileResource`. `FileResource` now contains
an `Rc<dyn File>`.
**THIS PR HAS GIT CONFLICTS THAT MUST BE RESOLVED**
This is the release commit being forwarded back to main for 1.33.2
Please ensure:
- [x] Everything looks ok in the PR
- [x] The release has been published
To make edits to this PR:
```shell
git fetch upstream forward_v1.33.2 && git checkout -b forward_v1.33.2 upstream/forward_v1.33.2
```
Don't need this PR? Close it.
cc @levex
Co-authored-by: levex <levex@users.noreply.github.com>
Co-authored-by: Levente Kurusa <lkurusa@kernelstuff.org>
Fixes #18979.
This changes the predicate for allowing `ext:` specifier resolution from
`snapshot_loaded_and_not_snapshotting` to `ext_resolution_allowed` which
is only set to true during the extension module loading phase. Module
loaders as used in core
are now declared as `ExtModuleLoader` rather than `dyn ModuleLoader`.
This removes the tty stuff that's hanging on the file resources and
instead stores them in a separate `TtyModeStore`. Although this will
cause the tty store items to not be removed when the resource is
removed, I think this is ok to do because there will be a small number
of resources this is every done with and usually those resources won't
ever be closed.
This commit changes how paths for npm packages are handled,
by canonicalizing them when resolving. This is done so that instead
of returning
"node_modules/<package_name>@<version>/node_modules/<dep>/index.js"
(which is a symlink) we "node_modules/<dep>@<dep_version>/index.js.
Fixes https://github.com/denoland/deno/issues/18924
Fixes https://github.com/bluwy/create-vite-extra/issues/31
---------
Co-authored-by: David Sherret <dsherret@gmail.com>
We can make `NodePermissions` rely on interior mutability (which the
`PermissionsContainer` is already doing) in order to not have to clone
everything all the time. This also reduces the chance of an accidental
`borrow` while `borrrow_mut`.
This is just a straight refactor and I didn't do any cleanup in
ext/node. After this PR we can start to clean it up and make things
private that don't need to be public anymore.
This commit changes how "disabled" ops behave. Instead of using "void"
functions under the hood, they now explicitly throw errors saying
that a given op doesn't exist.
`current_dir().unwrap()` joined with a Path is equivalent to the
implementation in `resolve_from_cwd()`. Manually tested on Ubuntu 22.04
and Windows 11.
Signed-off-by: Elijah Conners <business@elijahpepe.com>
This commit abstracts out the specifics of the underlying system calls
FS operations behind a new `FileSystem` and `File` trait in the
`ext/fs` extension.
This allows other embedders to re-use ext/fs, but substituting in a
different FS backend.
This is likely not the final form of these traits. Eventually they will
be entirely `deno_core::Resource` agnostic, and will live in a seperate
crate.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This is a follow-on to the earlier work in reducing string copies,
mainly focused on ensuring that ASCII strings are easy to provide to the
JS runtime.
While we are replacing a 16-byte reference in a number of places with a
24-byte structure (measured via `std::mem::size_of`), the reduction in
copies wins out over the additional size of the arguments passed into
functions.
Benchmarking shows approximately the same if not slightly less wallclock
time/instructions retired, but I believe this continues to open up
further refactoring opportunities.
This commit adds associated type to "NodeEnv" trait, called "Fs".
The "Fs" type has a trait bound on "NodeFs", which specifies APIs
required for all ops and resolution APIs to function.
A "RealFs" implementation of "NodeFs" is exported from the "deno_node"
crate, that provides a default implementation for the trait.
All code in "deno_node" extension was changed to use the "NodeFs" trait
to handle file system operations, instead of relying on APIs from the
standard library.
This commit changes the type parameter for "deno_node" extension, from
`P: NodePermission` to `Env: NodeEnv`.
`NodeEnv` is a new trait that has associated type `P: NodePermission`.
This is a stepping stone to support swappable file system for the
extension, that will be added as a second associated type to the
`NodeEnv` trait.
1. Rewrites the tests to be more back and forth rather than getting the
output all at once (which I believe was causing the hangs on linux and
maybe mac)
2. Runs the pty tests on the linux ci.
3. Fixes a bunch of tests that were just wrong.
4. Adds timeouts on the pty tests.
This commit changes how data required to bootstrap main and worker
runtime is serialized.
Instead of relying on serde_v8 and using JSON object,
we're doing manual serialization to a "v8::Array". This limits number
of V8 strings that need to be serialized by 16.
It also made it clear that some data could be obtained during
snapshotting instead of during bootstrap.
Since we can preserve ops in the snapshot these days, we no longer
need to have "Deno[Deno.internal].nodeUnstable" namespace.
Instead, various built-in Node.js modules can use appropriate APIs
directly.
This will improve diagnostics and catch any non-ASCII extension code
early.
This will use `debug_assert!` rather than `assert!` to avoid runtime
costs, and ensures (in debug_assert mode only) that all extension source
files are ASCII as we load them.
This commit adds unstable "Deno.openKv()" API that allows to open
a key-value database at a specified path.
---------
Co-authored-by: Luca Casonato <hello@lcas.dev>
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Reduce the number of copies and allocations of script code by carrying
around ownership/reference information from creation time.
As an advantage, this allows us to maintain the identity of `&'static
str`-based scripts and use v8's external 1-byte strings (to avoid
incorrectly passing non-ASCII strings, debug `assert!`s gate all string
reference paths).
Benchmark results:
Perf improvements -- ~0.1 - 0.2ms faster, but should reduce garbage
w/external strings and reduces data copies overall. May also unlock some
more interesting optimizations in the future.
This requires adding some generics to functions, but manual
monomorphization has been applied (outer/inner function) to avoid code
bloat.
Moving some code around in `ext/node` is it's a bit better well defined
and makes it possible for others to embed it.
I expect to see no difference in startup perf with this change.
This commit changes the build process in a way that preserves already
registered ops in the snapshot. This allows us to skip creating hundreds of
"v8::String" on each startup, but sadly there is still some op registration
going on startup (however we're registering 49 ops instead of >200 ops).
This situation could be further improved, by moving some of the ops
from "runtime/" to a separate extension crates.
---------
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
Follow-up to #18210:
* we are passing the generated `cfg` object into the state function
rather than passing individual config fields
* reduce cloning dramatically by making the state_fn `FnOnce`
* `take` for `ExtensionBuilder` to avoid more unnecessary copies
* renamed `config` to `options`
This implements two macros to simplify extension registration and centralize a lot of the boilerplate as a base for future improvements:
* `deno_core::ops!` registers a block of `#[op]`s, optionally with type
parameters, useful for places where we share lists of ops
* `deno_core::extension!` is used to register an extension, and creates
two methods that can be used at runtime/snapshot generation time:
`init_ops` and `init_ops_and_esm`.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This commit removes compression for the runtime JS code.
It means that we will have a bigger binary, but faster startup. After
several discussion in the CLI team we decided it's worth to trade
about 3Mb of binary size for 2ms faster startup time. With WebGPU
removed in 35196eab27
it shouldn't have such a big impact on the binary size.
This PR _**temporarily**_ removes WebGPU (which has behind the
`--unstable` flag in Deno), due to performance complications due to its
presence.
It will be brought back in the future; as a point of reference, Chrome
will ship WebGPU to stable on 26/04/2023.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
To be able to preserve "Deno.core.ops" we need to ensure that
ops are registered in the same order in various places, otherwise
we will get mismatch in external references ordering.
Prerequisite for https://github.com/denoland/deno/pull/18080
These methods are confusing because the arguments are backwards. I feel
like they should have never been added to `Option<T>` and that clippy
should suggest rewriting to
`map(...).unwrap_or(...)`/`map(...).unwrap_or_else(|| ...)`
https://github.com/rust-lang/rfcs/issues/1025
