Right now, if one of the linters fails, the all other ones continue
running in the background. This fixes this by waiting until all linters
are done before settling.
Running `tools/wpt.ts` with a filter would cause an error if there were
extra, leftover expectations in expectations.json. These errors would
not appear if no filter was passed, often leaving the filtered version
of the test runner broken.
This also introduces a smarter bit of logic where filters can be
specified with a leading slash (`tools/wpt.ts run -- /url` is equivalent
to `tools/wpt.ts run -- url`)
Makes the prebuilt installation a bit more reliable:
- Check for 200
- Check for an executable header (MZ, ELF, etc)
- Download to a .temp file until we're certain the file is valid
- If multiple requests for a tool are made, only run one task
This PR ensures that the original signal event is fired before any
dependent signal events.
---
The enabled tests fail on `main`:
```
assert_array_equals: Abort events fired in correct order expected property 0 to be
"original-aborted" but got "clone-aborted" (expected array ["original-aborted", "clone-aborted"]
got ["clone-aborted", "original-aborted"])
```
This PR exposes garbage collector for WPT
see:
3d80f7e879/common/gc.js (L34-L36)
```
/streams/readable-streams/garbage-collection.any.html
test stderr:
Tests are running without the ability to do manual garbage collection. They will still work, but coverage will be suboptimal.
Tests are running without the ability to do manual garbage collection. They will still work, but coverage will be suboptimal.
Tests are running without the ability to do manual garbage collection. They will still work, but coverage will be suboptimal.
Tests are running without the ability to do manual garbage collection. They will still work, but coverage will be suboptimal.
file result: ok. 4 passed; 0 failed; 0 expected failure; total 4 (255ms)
----------------------------------------
/streams/readable-streams/garbage-collection.any.worker.html
test stderr:
Tests are running without the ability to do manual garbage collection. They will still work, but coverage will be suboptimal.
Tests are running without the ability to do manual garbage collection. They will still work, but coverage will be suboptimal.
Tests are running without the ability to do manual garbage collection. They will still work, but coverage will be suboptimal.
Tests are running without the ability to do manual garbage collection. They will still work, but coverage will be suboptimal.
file result: ok. 4 passed; 0 failed; 0 expected failure; total 4 (277ms)
```
This PR removes that warning and improves coverage.
This PR fixes some crashing WPT tests due to an unresolved promise.
---
This could be a [stream spec](https://streams.spec.whatwg.org) bug
When `controller.close` is called on a byob stream, there's no cleanup
of pending `readIntoRequests`. The only cleanup of pending
`readIntoRequests` happen when `.byobRequest.respond(0)` is called, it
happens
here:6ba245fe25/ext/web/06_streams.js (L2026)
which ends up calling `readIntoRequest.closeSteps(chunk);` in
6ba245fe25/ext/web/06_streams.js (L2070)
To reproduce:
```js
async function byobRead() {
const input = [new Uint8Array([8, 241, 48, 123, 151])];
const stream = new ReadableStream({
type: "bytes",
async pull(controller) {
if(input.length === 0) {
controller.close();
// controller.byobRequest.respond(0); // uncomment for fix
return
}
controller.enqueue(input.shift())
},
});
const reader = stream.getReader({ mode: 'byob' });
const r1 = await reader.read(new Uint8Array(64));
console.log(r1);
const r2 = await reader.read(new Uint8Array(64));
console.log(r2);
}
await byobRead();
```
Running the script triggers:
```
error: Top-level await promise never resolved
```
This addresses issue #19918.
## Issue description
Event messages have the wrong isTrusted value when they are not
triggered by user interaction, which differs from the browser. In
particular, all MessageEvents created by Deno have isTrusted set to
false, even though it should be true.
This is my first ever contribution to Deno, so I might be missing
something.
Fixes the WPT tests that test w/invalid codes. Also explicitly ignoring
some h2 tests to hopefully prevent flakes.
The previous changes to WebSocketStream introduced a bug where the close
errors were not made available if the `pull` method was re-entrant.
The copyright checker was allowing files with code above the copyright
line in a few places, mainly as a result of IDEs ordering imports
improperly.
This makes the check more robust, and adds a whitelist of valid lines
that may appear before the copyright line.
This is a quick tool that I've been using to build benchmarking builds
for Deno.
Usage:
Build a benchmark `HEAD~1` and `origin/main` executable:
```sh
deno run tools/build_bench.ts HEAD~1 origin/main
```
Build debug benchmark executables of the last three commits:
```sh
deno run tools/build_bench.ts --profile debug HEAD HEAD~1 HEAD~2
```
Adds an import map of the core and ext JavaScript files. This was
created manually but a script to create one automatically wouldn't be
too much of a big thing either.
This should make working on especially the Node polyfills much more
pleasant, as it gives you feedback on if your imports are correct.
Unfortunately the TypeScript declaration files of some of the internal
modules clash with the import map and override the data from the actual
files with data from the declaration files. Those do not contain all
exports nor is their data always up to date. Still, this is much better
than not having one.
Follow up to https://github.com/denoland/deno/pull/19084.
This commit adds support for globs in the configuration file as well
as CLI arguments for files.
With this change users can now use glob syntax for "include" and
"exclude" fields, like so:
```json
{
"lint": {
"include": [
"directory/test*.ts",
"other_dir/"
],
"exclude": [
"other_dir/foo*.ts",
"nested/nested2/*"
]
},
"test": {
"include": [
"data/test*.ts",
"nested/",
"tests/test[1-9].ts"
],
"exclude": [
"nested/foo?.ts",
"nested/nested2/*"
]
}
}
```
Or in CLI args like so:
```
// notice quotes here; these values will be passed to Deno verbatim
// and deno will perform glob expansion
$ deno fmt --ignore="data/*.ts"
$ deno lint "data/**/*.ts"
```
Closes https://github.com/denoland/deno/issues/17971
Closes https://github.com/denoland/deno/issues/6365
This commit reimplements most of "node:http" client APIs using
"ext/fetch".
There is some duplicated code and two removed Node compat tests that
will be fixed in follow up PRs.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Partially supersedes #19016.
This migrates `spawn` and `spawn_blocking` to `deno_core`, and removes
the requirement for `spawn` tasks to be `Send` given our single-threaded
executor.
While we don't need to technically do anything w/`spawn_blocking`, this
allows us to have a single `JoinHandle` type that works for both cases,
and allows us to more easily experiment with alternative
`spawn_blocking` implementations that do not require tokio (ie: rayon).
Async ops (+~35%):
Before:
```
time 1310 ms rate 763358
time 1267 ms rate 789265
time 1259 ms rate 794281
time 1266 ms rate 789889
```
After:
```
time 956 ms rate 1046025
time 954 ms rate 1048218
time 924 ms rate 1082251
time 920 ms rate 1086956
```
HTTP serve (+~4.4%):
Before:
```
Running 10s test @ http://localhost:4500
2 threads and 10 connections
Thread Stats Avg Stdev Max +/- Stdev
Latency 68.78us 19.77us 1.43ms 86.84%
Req/Sec 68.78k 5.00k 73.84k 91.58%
1381833 requests in 10.10s, 167.36MB read
Requests/sec: 136823.29
Transfer/sec: 16.57MB
```
After:
```
Running 10s test @ http://localhost:4500
2 threads and 10 connections
Thread Stats Avg Stdev Max +/- Stdev
Latency 63.12us 17.43us 1.11ms 85.13%
Req/Sec 71.82k 3.71k 77.02k 79.21%
1443195 requests in 10.10s, 174.79MB read
Requests/sec: 142921.99
Transfer/sec: 17.31MB
```
Suggested-By: alice@ryhl.io
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This speeds up WPT tests in two ways:
1. The `WebCryptoAPI` tests are slow, so create a parallel bucket for
each individual test instead of one for all the `WebCryptoAPI` tests.
2. If a test is expected to fail, use a shorter timeout (1 minute rather
than 4).
To make it easier to debug which tests are slowing us down.
Tests taking more than 5s have duration printed in red,
taking more than 1s in yellow and less than 1s are printed
without color.
This reverts commit a3529d0232.
This change made debugging Node tests very hard - `AssertionError` is
now printed as `[Circular *1]` giving no visibility what failed.
We need to align two implementations together and remove this one then.
This reverts commit 4c2269d64a.
> This update introduced more flakiness to the tests on CI, we are going
> to investigate and reland this update after Deno 1.32.0 is released.
No need for two almost identical implementations of the same thing
---------
Co-authored-by: Yoshiya Hinosawa <stibium121@gmail.com>
Co-authored-by: Aapo Alasuutari <aapo.alasuutari@gmail.com>
This reverts commit 29fb7709ed.
This update introduced more flakiness to the tests on CI, we are going
to investigate and reland this update after Deno 1.32.0 is released.
This PR _**temporarily**_ removes WebGPU (which has behind the
`--unstable` flag in Deno), due to performance complications due to its
presence.
It will be brought back in the future; as a point of reference, Chrome
will ship WebGPU to stable on 26/04/2023.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This commit renames "deno_core::InternalModuleLoader" to
"ExtModuleLoader" and changes the specifiers used by the
modules loaded from this loader to "ext:".
"internal:" scheme was really ambiguous and it's more characters than
"ext:", which should result in slightly smaller snapshot size.
Closes https://github.com/denoland/deno/issues/18020
- relands #17872
- updates the timeouts to be re-configurable just for CI
- fixes `./tools/wpt.ts update`
- adds option not "ignore" during, applied to wpt epoch runs only
Adds two test files: "cli/tests/unit_node/process_test.ts" and
"cli/tests/unit_node/child_process_test.ts"
---------
Co-authored-by: Yoshiya Hinosawa <stibium121@gmail.com>
This PR refactors all internal js files (except core) to be written as
ES modules.
`__bootstrap`has been mostly replaced with static imports in form in
`internal:[path to file from repo root]`.
To specify if files are ESM, an `esm` method has been added to
`Extension`, similar to the `js` method.
A new ModuleLoader called `InternalModuleLoader` has been added to
enable the loading of internal specifiers, which is used in all
situations except when a snapshot is only loaded, and not a new one is
created from it.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
The 1.30.1 release had a performance regression that would have been
caught by looking at the benchmarks page. This adds a pre-flight step to
the release checklist for the person doing the release to go to this
page and look at the output.
This would have prevented #17629
This commit removes "Deno.core" namespace. It is strictly private API
that has no stability guarantees, we were supposed to remove it long time ago.
Co-authored-by: Yoshiya Hinosawa <stibium121@gmail.com>
Updated third_party dlint to v0.37.0 for GitHub Actions. This PR
includes following changes:
* fix(prefer-primordials): Stop using array pattern assignments
* fix(prefer-primordials): Stop using global intrinsics except for
`SharedArrayBuffer`
* feat(guard-for-in): Apply new guard-for-in rule
Previously the inner request object of the original and the new request
were the same, causing the requests to be entangled and mutable changes
to one to be visible to the other. This fixes that.
Since "Deno.spawn()", "Deno.spawnSync()" and "Deno.spawnChild"
are getting deprecated, this commits rewrites all tests and utilities to
use "Deno.Command" API instead.
Implements fast scheduling of deferred op futures.
```rs
#[op(fast)]
async fn op_read(
state: Rc<RefCell<OpState>>,
rid: ResourceId,
buf: &mut [u8],
) -> Result<u32, Error> {
// ...
}
```
The future is scheduled via a fast API call and polled by the event loop
after being woken up by its waker.
<!--
Before submitting a PR, please read http://deno.land/manual/contributing
1. Give the PR a descriptive title.
Examples of good title:
- fix(std/http): Fix race condition in server
- docs(console): Update docstrings
- feat(doc): Handle nested reexports
Examples of bad title:
- fix #7123
- update docs
- fix bugs
2. Ensure there is a related issue and it is referenced in the PR text.
3. Ensure there are tests that cover the changes.
4. Ensure `cargo test` passes.
5. Ensure `./tools/format.js` passes without changing files.
6. Ensure `./tools/lint.js` passes.
-->
https://fetch.spec.whatwg.org/#http-network-or-cache-fetch
> If httpRequest’s header list contains `Range`, then append
(`Accept-Encoding`, `identity`)
> to httpRequest’s header list.
>
> This avoids a failure when handling content codings with a part of an
encoded response.
> Additionally, many servers mistakenly ignore `Range` headers if a
non-identity encoding is accepted.
Fixes the error reported in #16304.
> = note:
/usr/bin/ld:/home/abotella/Projects/deno/cli/generated_symbol_exports_list_linux.def:1:
syntax error in dynamic list
collect2: error: ld returned 1 exit status
This was caused by the format of the symbols list on Linux being
malformed (as the error implies).
The format is documented in ld's
[VERSION](https://sourceware.org/binutils/docs/ld/VERSION.html) as well
as:
> --export-dynamic-symbol-list=file
Specify a --export-dynamic-symbol for each pattern in the
file. The format of the file is the same as the version node
without scope and node name. See VERSION for more
information.
Previously, the format for the Linux symbols list was simply a list of
symbols, now it follows the format:
```
{ symbol_name_a; ...; symbol_name_z };
```
Follow-up to #16208.
- Refactors build.rs behaviour to use `-exported_symbols_list` /
`--export-dynamic-symbol-list`
- Since all build systems now rely on a symbols list file, I have added
`generate_exported_symbols_list`, which derives the symbol list file
depending on the platform, which makes `tools/napi/generate_link_win.js`
redundant.
- Fixes a missed instance of `i8` being used instead of `c_char`
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
