1. Renames zap/fast-check to instead be a `no-slow-types` lint rule.
1. This lint rule is automatically run when doing `deno lint` for
packages (deno.json files with a name, version, and exports field)
1. This lint rules still occurs on publish. It can be skipped by running
with `--no-slow-types`
This change deprecates
`Deno.CreateHttpClientOptions.{certChain,privateKey}` in favour of
`Deno.CreateHttpClientOptions.{cert,key}`.
Closes #22278
Co-authored-by: Matt Mastracci <matthew@mastracci.com>
The format of the sanitizers will change a little bit:
- If multiple async ops leak and traces are on, we repeat the async op
header once per stack trace.
- All leaks are aggregated under a "Leaks detected:" banner as the new
timers are eventually going to be added, and these are neither ops nor
resources.
- `1 async op` is now `An async op`
- If ops and resources leak, we show both (rather than op leaks masking
resources)
Follow-on to https://github.com/denoland/deno/pull/22226
Splitting the sleep and interval ops allows us to detect an interval
timer. We also remove the use of the `op_async_void_deferred` call.
A future PR will be able to split the op sanitizer messages for timers
and intervals.
This changes the lockfile to not store JSR specifiers in the "remote"
section. Instead a single JSR integrity is stored per package in the
lockfile, which is a hash of the version's `x.x.x_meta.json` file, which
contains hashes for every file in the package. The hashes in this file
are then compared against when loading.
Additionally, when using `{ "vendor": true }` in a deno.json, the files
can be modified without causing lockfile errors—the checksum is only
checked when copying into the vendor folder and not afterwards
(eventually we should add this behaviour for non-jsr specifiers as
well). As part of this change, the `vendor` folder creation is not
always automatic in the LSP and running an explicit cache command is
necessary. The code required to track checksums in the LSP would have
been too complex for this PR, so that all goes through deno_graph now.
The vendoring is still automatic when running from the CLI.
Note: tests are not the only part of the codebase that uses `std`. Other
parts, like `tools/`, do too. So, it could be argued that this is a
little misleading. Either way, I'm doing this as discussed with
@mmastrac.
This introduces the `denort` binary - a slim version of deno without
tooling. The binary is used as the default for `deno compile`.
Improves `deno compile` final size by ~2.5x (141 MB -> 61 MB) on Linux
x86_64.
This implementation heavily depends on there being a lockfile, meaning
JSR specifiers will always diagnose as uncached unless it's there. In
practice this affects cases where a `deno.json` isn't being used. Our
NPM specifier support isn't subject to this.
The reason for this is that the version constraint solving code is
currently buried in `deno_graph` and not usable from the LSP, so the
only way to reuse that logic is the solved-version map in the lockfile's
`packages.specifiers`.
This looks like a massive PR, but it's only a move from cli/tests ->
tests, and updates of relative paths for files.
This is the first step towards aggregate all of the integration test
files under tests/, which will lead to a set of integration tests that
can run without the CLI binary being built.
While we could leave these tests under `cli`, it would require us to
keep a more complex directory structure for the various test runners. In
addition, we have a lot of complexity to ignore various test files in
the `cli` project itself (cargo publish exclusion rules, autotests =
false, etc).
And finally, the `tests/` folder will eventually house the `test_ffi`,
`test_napi` and other testing code, reducing the size of the root repo
directory.
For easier review, the extremely large and noisy "move" is in the first
commit (with no changes -- just a move), while the remainder of the
changes to actual files is in the second commit.
Removes the `FileFetcher`'s internal cache because I don't believe it's
necessary (we already cache this kind of stuff in places like deno_graph
or config files in different places). Removing it fixes this bug because
this functionality was already implemented in deno_graph and lowers
memory usage of the CLI a little bit.
This PR separates integration tests from CLI tests into a new project
named `cli_tests`. This is a prerequisite for an integration test runner
that can work with either the CLI binary in the current project, or one
that is built ahead of time.
## Background
Rust does not have the concept of artifact dependencies yet
(https://github.com/rust-lang/cargo/issues/9096). Because of this, the
only way we can ensure a binary is built before running associated tests
is by hanging tests off the crate with the binary itself.
Unfortunately this means that to run those tests, you _must_ build the
binary and in the case of the deno executable that might be a 10 minute
wait in release mode.
## Implementation
To allow for tests to run with and without the requirement that the
binary is up-to-date, we split the integration tests into a project of
their own. As these tests would not require the binary to build itself
before being run as-is, we add a stub integration `[[test]]` target in
the `cli` project that invokes these tests using `cargo test`.
The stub test runner we add has `harness = false` so that we can get
access to a `main` function. This `main` function's sole job is to
`execvp` the command `cargo test -p deno_cli`, effectively "calling"
another cargo target.
This ensures that the deno executable is always correctly rebuilt before
running the stub test runner from `cli`, and gets us closer to be able
to run the entire integration test suite on arbitrary deno executables
(and therefore split the build into multiple phases).
The new `cli_tests` project lives within `cli` to avoid a large PR. In
later PRs, the test data will be split from the `cli` project. As there
are a few thousand files, it'll be better to do this as a completely
separate PR to avoid noise.
- Move a workers test to js_unit_tests and make it work
- (slightly) repair the websocketstream_test and make it a JS unit test.
This test was being ignored and rotted quite a bit, but there's some
value in running as much of it as we can.
- Merge the two websocket test files
This removes the majority of `../../../../../../test_util` relative
imports from the codebase, allowing us to move this code more easily in
the future.
This commit removes some not really necessary FFI tests and in effect
removes them from being accessible from the user code.
This lowers the number of ops accessible to user code to 16.
Hacky quick fix. The real fix is a lot more work to do (move the
`SourceTextInfo` into all the diagnostics in order to make this less
error pone). I've already started on it, but it will require a lot of
downstream create changes.
Closes #22288
Auth tokens may be specified for one of the following:
- `abc123@deno.land`: `deno.land`, `www.deno.land`, etc
- `abc123@deno.land:8080`: `deno.land:8080`, `www.deno.land:8080`, etc
- `abc123@1.1.1.1`: IP `1.1.1.1` only
- `abc123@1.1.1.1:8080`: IP `1.1.1.1`, port 8080 only
- `abc123@[ipv6]`: IPv6 `[ipv6]` only
- `abc123@[ipv6]:8080`: IPv6 `[ipv6]`, port 8080 only
Leading dots are ignored, so `.deno.dev` is equivalent to `deno.dev`.
This moves the op sanitizer descriptions into Rust code and prepares for
eventual op import from `ext:core/ops`. We cannot import these ops from
`ext:core/ops` as the testing infrastructure ops are not always present.
Changes:
- Op descriptions live in `cli` code and are currently accessible via an
op for the older sanitizer code
- `phf` dep moved to workspace root so we can use it here
- `ops.op_XXX` changed to to `op_XXX` to prepare for op imports later
on.
This commit adds `ppid` getter for `node:process` to improve Node
compatibility one step further.
There is one problem though, which is that `Deno.ppid`, which
`process.ppid` internally calls, is actually of type `bigint` although
it's supposed to be `number`. I filed an issue for this (#22166). For
the time being, explciit type conversion from `bigint` to `number` is
applied to match the Node.js behavior.
Fixes https://github.com/denoland/deno/issues/22180
Matches the Node.js implementation more closely. Removed types, they do
not help just make it harder to debug with stack traces.
This commit adds a list of ops to `runtime/99_main.js` that are
currently relying on getting them from `Deno.core.ops`. All ops that are not
present in the list are removed from `Deno.core.ops` on startup (they are
imported from "virtual op module" - `ext:core/ops`) making them effectively
inaccessible to user code.
This change lowers the number of ops exposed to user code from 650 to
around 260. This number should be gradually decreased in follow-up PRs.
Step 1 of the Rustification of sanitizers, which unblocks the faster
timers.
This replaces the resource sanitizer with a Rust one, using the new APIs
in deno_core.
This commit adds automatic expansion of "imports" field in "deno.json"
file.
If "npm:" or "jsr:" imports are encountered we automatically try to add
a "directory" remapping.
Previously users had to specify entries for both `foo` and `foo/` to be
able to import like
`import { symbol1 } from "foo";` and `import { symbol2 } from
"foo/some_file.js"`:
```
{
"imports": {
"foo": "npm:@foo/bar",
"foo/": "npm:/@foo/bar/",
}
```
With this change users can only add entry for `foo`:
```
{
"imports": {
"foo": "npm:@foo/bar",
}
```
The entry for `foo/` will be provided automatically.
Similarly if user provides "directory" remapping explicitly, we will not
overwrite it.
For removal in Deno v2. There are two issues:
1. Any script being run causes the output of `warnOnDeprecatedApi()` to
be printed, even when none of the `rid` properties are called.
2. `.rid` of these classes is used in multiple tests. I'm not sure how
to account for that. I thought of having `STDIN_RID`, and friends,
constants, whose values can be shared between the tests and the classes
themselves. Should we go with that or do something else?
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
For removal in Deno v2. I've also updated the deprecation of
`Deno.FsWatcher.return()`, which, to be clear, I'm not in favour of
deprecating. I mention this in #15499. Either way, it's safe to merge
this PR, then decide against the deprecation.
- changed `Deno.UnsafeWindowSurface` typings from accepting
`Deno.UnsafePointerView` to `Deno.PointerValue`
- added width and height to `GPUCanvasConfiguration`
Removes weird "frame like" characters and simplifies the output:
```
warning: Use of deprecated "Deno.isatty()" API. This API will be removed in Deno 2.
Stack trace:
at file:///Users/ib/dev/deno/foo.js:2:8
hint: Use `stdStream.isTerminal()` instead.
warning: Use of deprecated "Deno.isatty()" API. This API will be removed in Deno 2.
Stack trace:
at file:///Users/ib/dev/deno/foo.js:7:8
hint: Use `stdStream.isTerminal()` instead.
```
https://github.com/denoland/deno/assets/13602871/7a6e24bf-44ec-4dbf-ac96-2af1db9f2ab9
This commit deprecates `window` global and adds deprecation
notice on each use of `window`.
We decided to proceed with removal of `window` global variable in Deno
2.0. There's a lot of code
in the wild that uses pattern like this:
```
if (typeof window !== "undefined) {
...
}
```
to check if the code is being run in browser. However, this check passes
fine in Deno and
most often libraries that do this check try to access some browser API
that is not available
in Deno, or use DOM APIs (which are also not available in Deno).
This situation has occurred multiple times already
and it's unfeasible to expect the whole ecosystem to migrate to new
check (and even if that
happened there's a ton of code that's already shipped and won't change).
The migration is straightfoward - replace all usages of `window` with
`globalThis` or `self`.
When Deno encounters use of `window` global it will now issue a warning,
steering users
towards required changes:
```
Warning
├ Use of deprecated "window" API.
│
├ This API will be removed in Deno 2.0. Make sure to upgrade to a stable API before then.
│
├ Suggestion: Use `globalThis` or `self` instead.
│
├ Suggestion: You can provide `window` in the current scope with: `const window = globalThis`.
│
└ Stack trace:
└─ at file:///Users/ib/dev/deno/foo.js:7:1
```
Ref https://github.com/denoland/deno/issues/13367.
This commit adds support for [TC39 Decorator
Proposal](https://github.com/tc39/proposal-decorators).
These decorators are only available in transpiled sources - ie.
non-JavaScript files (because of lack of support in V8).
This entails that "experimental TypeScript decorators" are not available
by default
and require to be configured, with a configuration like this:
```
{
"compilerOptions": {
"experimentalDecorators": true
}
}
```
Closes https://github.com/denoland/deno/issues/19160
---------
Signed-off-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Co-authored-by: crowlkats <crowlkats@toaxl.com>
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
This change sets the removal version for the `deno bundle` sub-command
for Deno v2. The warnings appear when `deno bundle` is run and in the
`--help` menu.
This change:
1. Implements `Deno.FsFile.sync()` and `Deno.FsFile.syncSync()`.
2. Deprecates `Deno.fsync()` and `Deno.fsyncSync()` for removal in Deno
v2, in favour of the above corresponding methods.
Related #21995
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This change:
1. Implements `Deno.FsFile.dataSync()` and `Deno.FsFile.dataSyncSync()`.
2. Deprecates `Deno.fdatasync()` and `Deno.fdatasyncSync()` for removal
in Deno v2, in favour of the above corresponding methods.
3. Replaces use of `Deno.fdatasync()` and `Deno.fdatasyncSync()` with
the above instance methods.
Related #21995
Most uses of `Deno.resources()` within tests, as they previously checked
for leaked resources. This is not needed as the test runner does this
automatically. Other internal uses of this API have been replaced with
the internal `Deno[Deno.internal].core.resources()`.
This change:
1. Implements `Deno.stdin.isTerminal()`, `Deno.stdout.isTerminal()` and
`Deno.stderr.isTerminal()`.
2. Deprecates `Deno.isatty()` for removal in Deno v2, in favour of the
above instance methods.
3. Replaces use of `Deno.isatty()` with the above instance methods.
Related #21995
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
This commit adds `import.meta.filename` and `import.meta.dirname` APIs.
These APIs return string representation of filename and containing
dirname.
They are only defined for local modules (modules that have `file:///`
scheme).
Example:
```ts
console.log(import.meta.filename, import.meta.dirname)
```
Unix:
```
$ deno run /dev/my_module.ts
/dev/my_module.ts /dev/
```
Windows:
```
$ deno run C:\dev\my_module.ts
C:\dev\my_module.ts C:\
```
This change sets the removal version of `Deno.customInspect` for Deno
v2.
Towards #22021
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
It appears the `--prompt` flag has done nothing for some time. Perhaps,
since #13650. Classifying this as a dead functionality removal for this
reason.
Did this while working on #22021.
This change:
1. Sets the removal version for `Deno.ListenTlsOptions.certFile`,
`Deno.ListenTlsOptions.keyFile` and `Deno.ConnectTlsOptions.certFile`
for Deno v2, in favour of the `cert`, `key` and `caCerts` options,
respectively.
2. Replaces use of the deprecated options with the new recommended
options.
Towards #22021
This initially uses the new diagnostic printer in `deno lint`,
`deno doc` and `deno publish`. In the limit we should also update
`deno check` to use this printer.
This commit deprecates "--unstable" flag.
When "--unstable" flag is encountered a warning like this is printed:
```
The `--unstable` flag is deprecated, use granular `--unstable-*` flags instead.
Learn more at: https://docs.deno.com/runtime/manual/tools/unstable_flags
```
When "--unstable" flag is used and an unstable API is called an
additional warning like this is printed for each API call:
```
The `Deno.dlopen` API was used with `--unstable` flag. The `--unstable` flag is deprecated, use granular `--unstable-ffi` instead.
Learn more at: https://docs.deno.com/runtime/manual/tools/unstable_flags
```
When no "--unstable-*" flag is provided and an unstable API is called
following
warning is issued before exiting:
```
Unstable API 'Deno.dlopen'. The `--unstable-ffi` flag must be provided.
```
---------
Signed-off-by: Divy Srivastava <dj.srivastava23@gmail.com>
Signed-off-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
Co-authored-by: Asher Gomez <ashersaupingomez@gmail.com>
This change removes the currently deprecated `Deno.cron()` overload with
`options` as a potential last argument.
This might be fine to do now, in a major release, as `Deno.cron()` is an
unstable API. I thought of doing this while working on #22021. If this
is not ready to remove, I can instead set the removal version of this
overload for Deno v2.
Note: this overload was deprecated in Deno v1.38.2 (#21225). So it's
been deprecated for over 2 months.
This change:
1. Sets the removal version for `Deno.RequestEvent`, `Deno.HttpConn` and
`Deno.serveHttp()` for Deno v2. I thought it might be worth calling
`warnOnDeprecatedApi()` within `Deno.Request` and `Deno.HttpConn`
methods, but I thought just having it called within `Deno.serveHttp()`
might be sufficient.
2. Removes some possibly unneeded related benchmarks.
Towards #22021
Closes https://github.com/denoland/deno/issues/21828.
This API is a huge footgun. And given that "Deno.serveHttp" is a
deprecated API that is discouraged to use (use "Deno.serve()"
instead); it makes no sense to keep this API around.
This is a step towards fully migrating to Hyper 1.
Fixes #21928.
We have a code path which empties the extension sources because they're
expected to be pre-executed in the snapshot. Instead of using
conditional compilation for that, we now just check if a snapshot was
provided.
Removes the `dont_use_runtime_snapshot` feature. We didn't allow not
providing a snapshot unless this feature was provided, now we always do.
Adds the `only_snapshotted_js_sources` feature for us to use in CLI.
This asserts that a snapshot is provided and gates the runtime
transpilation code so it isn't included in the executable.
This change takes advantage of explicit resources management for
`FsFile` instances and tweaks documentation to encourage the use of it.
---------
Signed-off-by: Asher Gomez <ashersaupingomez@gmail.com>
<!--
Before submitting a PR, please read https://deno.com/manual/contributing
1. Give the PR a descriptive title.
Examples of good title:
- fix(std/http): Fix race condition in server
- docs(console): Update docstrings
- feat(doc): Handle nested reexports
Examples of bad title:
- fix #7123
- update docs
- fix bugs
2. Ensure there is a related issue and it is referenced in the PR text.
3. Ensure there are tests that cover the changes.
4. Ensure `cargo test` passes.
5. Ensure `./tools/format.js` passes without changing files.
6. Ensure `./tools/lint.js` passes.
7. Open as a draft PR if your work is still in progress. The CI won't
run
all steps, but you can add '[ci]' to a commit message to force it to.
8. If you would like to run the benchmarks on the CI, add the 'ci-bench'
label.
-->
We were missing the `constants` export in the promise `fs` API which is
available in node.
```ts
import { constants, promises } from "node:fs";
import { constants as fsPromiseConstants } from "node:fs/promises";
console.log(constants === promises.constants); // logs: true
console.log(constants === fsPromiseConstants); // logs: true
```
Fixes https://github.com/denoland/deno/issues/21994
<!--
Before submitting a PR, please read https://deno.com/manual/contributing
1. Give the PR a descriptive title.
Examples of good title:
- fix(std/http): Fix race condition in server
- docs(console): Update docstrings
- feat(doc): Handle nested reexports
Examples of bad title:
- fix #7123
- update docs
- fix bugs
2. Ensure there is a related issue and it is referenced in the PR text.
3. Ensure there are tests that cover the changes.
4. Ensure `cargo test` passes.
5. Ensure `./tools/format.js` passes without changing files.
6. Ensure `./tools/lint.js` passes.
7. Open as a draft PR if your work is still in progress. The CI won't
run
all steps, but you can add '[ci]' to a commit message to force it to.
8. If you would like to run the benchmarks on the CI, add the 'ci-bench'
label.
-->
Ultimately, it came down to using incorrect property names in the
`FakeSocket` constructor. The values are passed under `remoteAddress`,
not `hostname` and `remotePort` instead of `port`.
Fixes https://github.com/denoland/deno/issues/21980
This commit introduces deprecation warnings for "Deno.*" APIs.
This is gonna be quite noisy, but should tremendously help with user
code updates to ensure
smooth migration to Deno 2.0. The warning is printed at each unique call
site to help quickly
identify where code needs to be adjusted. There's some stack frame
filtering going on to
remove frames that are not useful to the user and would only cause
confusion.
The warning can be silenced using "--quiet" flag or
"DENO_NO_DEPRECATION_WARNINGS" env var.
"Deno.run()" API is now using this warning. Other deprecated APIs will
start warning
in follow up PRs.
Example:
```js
import { runEcho as runEcho2 } from "http://localhost:4545/run/warn_on_deprecated_api/mod.ts";
const p = Deno.run({
cmd: [
Deno.execPath(),
"eval",
"console.log('hello world')",
],
});
await p.status();
p.close();
async function runEcho() {
const p = Deno.run({
cmd: [
Deno.execPath(),
"eval",
"console.log('hello world')",
],
});
await p.status();
p.close();
}
await runEcho();
await runEcho();
for (let i = 0; i < 10; i++) {
await runEcho();
}
await runEcho2();
```
```
$ deno run --allow-read foo.js
Warning
├ Use of deprecated "Deno.run()" API.
│
├ This API will be removed in Deno 2.0. Make sure to upgrade to a stable API before then.
│
├ Suggestion: Use "Deno.Command()" API instead.
│
└ Stack trace:
└─ at file:///Users/ib/dev/deno/foo.js:3:16
hello world
Warning
├ Use of deprecated "Deno.run()" API.
│
├ This API will be removed in Deno 2.0. Make sure to upgrade to a stable API before then.
│
├ Suggestion: Use "Deno.Command()" API instead.
│
└ Stack trace:
├─ at runEcho (file:///Users/ib/dev/deno/foo.js:8:18)
└─ at file:///Users/ib/dev/deno/foo.js:13:7
hello world
Warning
├ Use of deprecated "Deno.run()" API.
│
├ This API will be removed in Deno 2.0. Make sure to upgrade to a stable API before then.
│
├ Suggestion: Use "Deno.Command()" API instead.
│
└ Stack trace:
├─ at runEcho (file:///Users/ib/dev/deno/foo.js:8:18)
└─ at file:///Users/ib/dev/deno/foo.js:14:7
hello world
Warning
├ Use of deprecated "Deno.run()" API.
│
├ This API will be removed in Deno 2.0. Make sure to upgrade to a stable API before then.
│
├ Suggestion: Use "Deno.Command()" API instead.
│
└ Stack trace:
├─ at runEcho (file:///Users/ib/dev/deno/foo.js:8:18)
└─ at file:///Users/ib/dev/deno/foo.js:17:9
hello world
hello world
hello world
hello world
hello world
hello world
hello world
hello world
hello world
hello world
Warning
├ Use of deprecated "Deno.run()" API.
│
├ This API will be removed in Deno 2.0. Make sure to upgrade to a stable API before then.
│
├ Suggestion: Use "Deno.Command()" API instead.
│
├ Suggestion: It appears this API is used by a remote dependency.
│ Try upgrading to the latest version of that dependency.
│
└ Stack trace:
├─ at runEcho (http://localhost:4545/run/warn_on_deprecated_api/mod.ts:2:18)
└─ at file:///Users/ib/dev/deno/foo.js:20:7
hello world
```
Closes #21839
Transpiler doing type checking such as the ones used in dnt or bundler
fail because of incompatible Worker types if env like browser are
targeted.
Signed-off-by: Jérôme Benoit <jerome.benoit@sap.com>
This commit removes the requirement for `--unstable` flag in `deno
jupyter` subcommand. The process will no longer exit if this flag is not
provided, however the subcommand itself is still considered unstable
and might change in the future.
Required for https://github.com/denoland/deno/pull/21452
This commit adds support for [Stage 3 Temporal API
proposal](https://tc39.es/proposal-temporal/docs/).
The API is available when `--unstable-temporal` flag is passed.
---------
Signed-off-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Co-authored-by: David Sherret <dsherret@gmail.com>
Co-authored-by: Kenta Moriuchi <moriken@kimamass.com>
This commit removes conditional type-checking of unstable APIs.
Before this commit `deno check` (or any other type-checking command and
the LSP) would error out if there was an unstable API in the code, but not
`--unstable` flag provided.
This situation hinders DX and makes it harder to configure Deno. Failing
during runtime unless `--unstable` flag is provided is enough in this case.
This was incorrectly being stored so the AOT cache for JSR specifiers
wasn't being used. I added a wrapper type to help prevent the API being
used incorrectly.
This commit adds support for "rejectionhandled" Web Event and
"rejectionHandled" Node event.
```js
import process from "node:process";
process.on("rejectionHandled", (promise) => {
console.log("rejectionHandled", reason, promise);
});
window.addEventListener("rejectionhandled", (event) => {
console.log("rejectionhandled", event.reason, event.promise);
});
```
---------
Co-authored-by: Matt Mastracci <matthew@mastracci.com>
<!--
Before submitting a PR, please read https://deno.com/manual/contributing
1. Give the PR a descriptive title.
Examples of good title:
- fix(std/http): Fix race condition in server
- docs(console): Update docstrings
- feat(doc): Handle nested reexports
Examples of bad title:
- fix #7123
- update docs
- fix bugs
2. Ensure there is a related issue and it is referenced in the PR text.
3. Ensure there are tests that cover the changes.
4. Ensure `cargo test` passes.
5. Ensure `./tools/format.js` passes without changing files.
6. Ensure `./tools/lint.js` passes.
7. Open as a draft PR if your work is still in progress. The CI won't
run
all steps, but you can add '[ci]' to a commit message to force it to.
8. If you would like to run the benchmarks on the CI, add the 'ci-bench'
label.
-->
---------
Signed-off-by: Matt Mastracci <matthew@mastracci.com>
Co-authored-by: Matt Mastracci <matthew@mastracci.com>
Ensures the Deno process is brought down even when the runtime gets hung
up on something.
Marvin found that the lsp was running without a parent vscode around so
this is maybe/probably related.
Fixes https://github.com/denoland/deno/issues/21840
The problem was hard to reproduce as its a race condition. I've added a
test that reproduces the problem 1/10 tries. We should move the
idleTimeout handling to Rust (maybe even built into fastwebsocket).
We were calling `expand_glob` on our excludes, which is very expensive
and unnecessary because we can pattern match while traversing instead.
1. Doesn't expand "exclude" globs. Instead pattern matches while walking
the directory.
2. Splits up the "include" into base paths and applicable file patterns.
This causes less pattern matching to occur because we're only pattern
matching on patterns that might match and not ones in completely
unrelated directories.
This defines the removal version of v2 for the following APIs that
favour the Streams API:
* `Deno.copy()`
* `Deno.File`
* `Deno.iter()`
* `Deno.Buffer`
* `Deno.readAll()`
* `Deno.readAllSync()`
* `Deno.writeAll()`
* `Deno.writeAllSync()`
* `Deno.FsWatcher.return()`
Part 1 of a potential 3 part series. Ref #13449
The current implementation passes key material back and forth RustCrypto
group of crates and ring. ring does not implement p521 yet.
This PR adds support for P521 named curve in `generateKey` and
`importKey` where we use RustCrypto. Other parts should be moved over to
the RustGroup group of crates for consistency.
This PR fixes #21658.
- `check` subcommand sees `exclude` option in `deno.json`. When some
paths passed with `check` command listed in `exclude`, they are ignored.
- When some files are listed in `exclude` and imported indirectly among
module graph, they are checked.
Harden the code that does permission checks to protect against
re-opening of stdin.
Code that runs FFI is vulnerable to an attack where fd 0 is closed
during a permission check and re-opened with a file that contains a
positive response (ie: `y` or `A`). While FFI code is dangerous in
general, we can make it more difficult for FFI-enabled code to bypass
additional permission checks.
- Checks to see if the underlying file for stdin has changed from the
start to the end of the permission check (detects races)
- Checks to see if the message is excessively long (lowering the window
for races)
- Checks to see if stdin and stderr are still terminals at the end of
the function (making races more difficult)
Fixes #20516
Follow up to #21747 and #21746
This tackles the last point of #20516 where certain inputs weren't
accepted in the other zlib methods
This adds the `toU8` conversion of `_brotli` to `_zlib.mjs`, when we
create the ZLibBuffer, we'll sanitize the input. I noticed that the
async had no handler for `string` input so I added that as well.
Fixes https://github.com/denoland/deno/issues/21734
Changes:
- Use default encode when options do not provide a encode callback.
- Remove internal TS for `node:querystring`. Its not helping catching
bugs like this because of invalid type assumptions and use of `any`,
more of a maintenance burden.
This fixes point 3 of https://github.com/denoland/deno/issues/20516
This PR creates consistency between the sync and async versions of the
brotli compress where we will always return a buffer like Node.
This fixes point 2 of #20516
This adds a conversion from Dataview/Buffer by returning `obj.buffer`
which can be converted to a `UInt8Array`.
Question: Regarding point 4 of the mentioned issue would it be
appropriate to copy the toU8 helper to the `zlib.mjs` methods?
These tests started failing on CI on Dec 28th, 2023 returning
ENOTFOUND. It's unclear what's going on, since `dig -x
8.8.8.8.in-addr.arpa`.
It needs a deeper investigation, but I want to unblock main branch
in the meantime.
Main change is that:
- "hyper" has been renamed to "hyper_v014" to signal that it's legacy
- "hyper1" has been renamed to "hyper" and should be the default
`opAsync` requires a lookup by name on each async call. This is a
mechanical translation of all opAsync calls to ensureFastOps.
The `opAsync` API on Deno.core will be removed at a later time.
When we migrate to op-import-per-extension, we will want to ensure that
ops have one and only one place where they are imported. This tackles
the ops that are imported via `ensureFastOps`, but does not yet tackle
direct `ops` imports.
Landing ahead of https://github.com/denoland/deno_core/pull/393
Node HTTP/2 was using the default h2 `Bytes` datatype when we can be
making using of `BufView` like we do in `Deno.serve`.
`fetch` and `Deno.serverHttp` can't make use of `BufView` because they
are using `reqwest` which is stuck on hyper 0.x at this time.
This commit adds a way to connect to the TS compiler host that is run
as part of the "deno lsp" subcommand. This can be done by specifying
"DENO_LSP_INSPECTOR" variable.
---------
Co-authored-by: Nayeem Rahman <nayeemrmn99@gmail.com>
This PR implements the child_process IPC pipe between parent and child.
The implementation uses Windows named pipes created by parent and passes
the inheritable file handle to the child.
I've also replace parts of the initial implementation which passed the
raw parent fd to JS with resource ids instead. This way no file handle
is exposed to the JS land (both parent and child).
`IpcJsonStreamResource` can stream upto 800MB/s of JSON data on Win 11
AMD Ryzen 7 16GB (without `memchr` vectorization)
`napi_open_handle_scope` was returning a bogus handle_scope and we were
trying to close it in `napi_close_handle_scope`.
This is a bit of a challenge to test, but the following testcase comes
from #21601 and appears to be fixed by this.
```
import { decode } from "https://deno.land/std@0.209.0/encoding/base64.ts";
import sharp from "npm:sharp";
const img = 'iVBORw0KGgoAAAANSUhEUgAAAQAAAAEAAQMAAABmvDolAAAAA1BMVEWq09/P7Lz1AAAAH0lEQVRoge3BAQ0AAADCoPdPbQ43oAAAAAAAAAAAvg0hAAABmmDh1QAAAABJRU5ErkJggg==';
Deno.test("async", async () => {
const id = setTimeout(() => Deno.exit(1), 1000);
await sharp(decode(img)).toBuffer();
await sharp(decode(img)).toBuffer();
clearTimeout(id);
});
```
Fixes https://github.com/denoland/deno/issues/21594
I verified locally that this fixes the problem. I'm working on testing
harness for Jupyter kernel to catch regressions like this and will
add it in a follow up PR.
Bumped versions for 1.39.0
Please ensure:
- [x] Target branch is correct (`vX.XX` if a patch release, `main` if
minor)
- [x] Crate versions are bumped correctly
- [x] deno_std version is incremented in the code (see
`cli/deno_std.rs`)
- [x] Releases.md is updated correctly (think relevancy and remove
reverts)
To make edits to this PR:
```shell
git fetch upstream release_1_39.0 && git checkout -b release_1_39.0 upstream/release_1_39.0
```
cc @mmastrac
---------
Co-authored-by: mmastrac <mmastrac@users.noreply.github.com>
Co-authored-by: Matt Mastracci <matthew@mastracci.com>
This change deprecates `Deno.Reader`, `Deno.ReaderSync`, `Deno.Writer`,
`Deno.WriterSync` and `Deno.Closer` in favour of the [Web Streams
API](https://developer.mozilla.org/en-US/docs/Web/API/Streams_API).
After discussing with Yoshiya, we both thought now might be the right
time to deprecate these interfaces with v2 getting closer.
This PR implements the Node child_process IPC functionality in Deno on
Unix systems.
For `fd > 2` a duplex unix pipe is set up between the parent and child
processes. Currently implements data passing via the channel in the JSON
serialization format.
Part 2 of removing middleware.
This is somewhat awkward because `V8CrossThreadTaskSpawner` requires
tasks to be `Send`, but NAPI makes heavy use of `!Send` pointers. In
addition, Rust causes a closure to be `!Send` if you pull a `!Send`
value out of a struct.
---------
Signed-off-by: Matt Mastracci <matthew@mastracci.com>
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
Adds performance measurements for all ops used by the LSP. Also changes
output of "Language server status" page to include more precise
information.
Current suspicion is that computing "script version" takes a long time
for some users.
This problem occurred trying to load tensorflow.js
```
> import * as tf from 'npm:@tensorflow/tfjs';
Uncaught SyntaxError: Identifier 'mod' has already been declared at file:///Users/ry/Library/Caches/deno/npm/registry.npmjs.org/@tensorflow/tfjs/4.14.0/dist/tf.node.js:167:14
at async <anonymous>:1:33
```
This commit adds a no-op flushHeaders method to the ServerResponse
object. It is a nop because the ServerResponse implementation is based
on top of the Deno server API instead of the Node `OutgoingMessage`
base.
Fixes #21509
This fixes #21434 for `BroadcastChannel` and `WebSocketStream`.
`--unstable` still enable both, but granular unstable flags now also
work:
* `--unstable-net` now enables `WebSocketStream`.
* `--unstable-broadcast-channel` now enables `BroadcastChannel`.
* Additionally, there are now tests for all granular unstable flags.
Since `unsafe-proto` already had tests, so I didn't add any for this
one.
It also introduces a map to keep track of granular unstable ids without
having to sync multiple places.
This commit brings back usage of primordials in "40_testing.js" by
turning it back into an ES module and using new "lazy loading" functionality
of ES modules coming from "deno_core".
The same approach was applied to "40_jupyter.js".
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Adds an `--unstable-sloppy-imports` flag which supports the
following for `file:` specifiers:
* Allows writing `./mod` in a specifier to do extension probing.
- ex. `import { Example } from "./example"` instead of `import { Example
} from "./example.ts"`
* Allows writing `./routes` to do directory extension probing for files
like `./routes/index.ts`
* Allows writing `./mod.js` for *mod.ts* files.
This functionality is **NOT RECOMMENDED** for general use with Deno:
1. It's not as optimal for perf:
https://marvinh.dev/blog/speeding-up-javascript-ecosystem-part-2/
1. It makes tooling in the ecosystem more complex in order to have to
understand this.
1. The "Deno way" is to be explicit about what you're doing. It's better
in the long run.
1. It doesn't work if published to the Deno registry because doing stuff
like extension probing with remote specifiers would be incredibly slow.
This is instead only recommended to help with migrating existing
projects to Deno. For example, it's very useful for getting CJS projects
written with import/export declaration working in Deno without modifying
module specifiers and for supporting TS ESM projects written with
`./mod.js` specifiers.
This feature will output warnings to guide the user towards correcting
their specifiers. Additionally, quick fixes are provided in the LSP to
update these specifiers:
Landing changes required for
https://github.com/denoland/deno_core/pull/359
We needed to update 99_main.js and a whole load of tests.
API changes:
- setPromiseRejectCallback becomes setUnhandledPromiseRejectionHandler.
The function is now called from eventLoopTick.
- The promiseRejectMacrotaskCallback no longer exists, as this is
automatically handled in eventLoopTick.
- ops.op_dispatch_exception now takes a second parameter: in_promise.
The preferred way to call this op is now reportUnhandledException or
reportUnhandledPromiseRejection.
This commit stabilizes "Deno.HttpServer.shutdown" API as well as
Unix socket support in "Deno.serve" API.
---------
Co-authored-by: Yoshiya Hinosawa <stibium121@gmail.com>
A bit hacky, but it works. Essentially, this will check for all the
scripts in the node_modules/.bin directory then force them to run with
Deno via deno_task_shell.
This commit adds a method of `Symbol.dispose` to the object returned
from `Deno.createHttpClient`, so we can make use of [explicit resource
management](https://github.com/tc39/proposal-explicit-resource-management)
by declaring it with `using`.
This commit adds support for a new `kv.watch()` method that allows
watching for changes to a key-value pair. This is useful for cases
where you want to be notified when a key-value pair changes, but
don't want to have to poll for changes.
---------
Co-authored-by: losfair <zhy20000919@hotmail.com>
Add support for signing with a RSA PEM private key: `pkcs8` and `pkcs1`.
Fixes https://github.com/denoland/deno/issues/18972
Ref #21124
Verified fix with `npm:sshpk`. Unverfied but fixes
`npm:google-auth-library`, `npm:web-push` & `oracle/oci-typescript-sdk`
---------
Signed-off-by: Divy Srivastava <dj.srivastava23@gmail.com>
This commit removes some of the technical debt related
to snapshotting JS code:
- "cli/ops/mod.rs" and "cli/build.rs" no longer define "cli" extension
which was not required anymore
- Cargo features for "deno_runtime" crate have been unified in
"cli/Cargo.toml"
- "cli/build.rs" uses "deno_runtime::snapshot::create_runtime_snapshot"
API
instead of copy-pasting the code
- "cli/js/99_main.js" was completely removed as it's not necessary
anymore
Towards https://github.com/denoland/deno/issues/21137
This PR causes Deno to include more files in the graph based on how a
template literal looks that's provided to a dynamic import:
```ts
const file = await import(`./dir/${expr}`);
```
In this case, it will search the `dir` directory and descendant
directories for any .js/jsx/etc modules and include them in the graph.
To opt out of this behaviour, move the template literal to a separate
line:
```ts
const specifier = `./dir/${expr}`
const file = await import(specifier);
```
Switch `ext/fetch` over to `resourceForReadableStream` to simplify and
unify implementation with `ext/serve`. This allows us to work in Rust
with resources only.
Two additional changes made to `resourceForReadableStream` were
required:
- Add an optional length to `resourceForReadableStream` which translates
to `size_hint`
- Fix a bug where writing to a closed stream that was full would panic
This commit changes LSP log names by prefixing them, we now have these
prefixes:
- `lsp.*` - requests coming from the client
- `tsc.request.*` - requests coming from clients that are routed to TSC
- `tsc.op.*` - ops called by the TS host
- `tsc.host.*` - requests that call JavaScript runtime that runs
TypeScript compiler host
Additionall `Performance::mark` was split into `Performance::mark` and
`Performance::mark_with_args` to reduce verbosity of code and logs.
This commit removes "ThrottledCancellationToken" in favor of
"CancellationToken".
Since calling into Rust to check if Tokio's cancellation token has
already been canceled is really cheap, there's no need for us to
throttle this check and let TSC burn up CPU with heavy computation.
When an old request is obsoleted while the user is typing, the client
will say so to the server and tower-lsp will drop the future associated
with that request.
This wires that up to the ts server by having any request's token be
cancelled when the surrounding state is dropped.
The self-upgrade feature is undesirable when deno is installed from
(Linux) distribution repository - using a system package manager. This
change will allow package maintainers to build deno with the "upgrade"
subcommand and background check disabled.
When the user runs `deno upgrade <args>` and the upgrade feature is
disabled, it will exit with error message explaining that this deno
binary was built without the upgrade feature.
Note: This patch is already used in the Alpine Linux’s
[deno](https://pkgs.alpinelinux.org/packages?name=deno) package.
What `Deno.ChildProcess` actually implements is `AsyncDisposable`, but the type
declaration says it's `Disposable`. This PR fixes the type declaration to match
the actual implementation.
Issue was main does canary builds, which broke this test because it
didn't handle searching for a canary release. Tested by building as
canary locally.
This PR updates the deprecation notices to point to the same replacement
APIs that the Standard Library points to. I've also tweaked the notices
to be a little more presentable/navigatable.
In particular, a follow-up PR in std will be made that documents the use
of `toArrayBuffer()`.
Closes #21193
Towards #20976
This commit adds unstable workspace support. This is extremely
bare-bones and
minimal first-pass at this.
With this change `deno.json` supports specifying `workspaces` key, that
accepts a list of subdirectories. Each workspace can have its own import
map. It's required to specify a `"name"` and `"version"` properties in the
configuration file for the workspace:
```jsonc
// deno.json
{
"workspaces": [
"a",
"b"
},
"imports": {
"express": "npm:express@5"
}
}
```
``` jsonc
// a/deno.json
{
"name": "a",
"version": "1.0.2",
"imports": {
"kleur": "npm:kleur"
}
}
```
```jsonc
// b/deno.json
{
"name": "b",
"version": "0.51.0",
"imports": {
"chalk": "npm:chalk"
}
}
```
`--unstable-workspaces` flag is required to use this feature:
```
$ deno run --unstable-workspaces mod.ts
```
---------
Co-authored-by: David Sherret <dsherret@gmail.com>
This PR changes the `Deno.cron` API:
* Marks the existing function as deprecated
* Introduces 2 new overloads, where the handler arg is always last:
```ts
Deno.cron(
name: string,
schedule: string,
handler: () => Promise<void> | void,
)
Deno.cron(
name: string,
schedule: string,
options?: { backoffSchedule?: number[]; signal?: AbortSignal },
handler: () => Promise<void> | void,
)
```
This PR also fixes a bug, when other crons continue execution after one
of the crons was closed using `signal`.
Fixes #21121 and #19498
Migrates fully to rustls_tokio_stream. We no longer need to maintain our
own TlsStream implementation to properly support duplex.
This should fix a number of errors with TLS and websockets, HTTP and
"other" places where it's failing.
This PR uses the new `cancel` method of `TransformStream` to properly
clean up the internal `TextDecoder` used in `TextDecoderStream` if the
stream is cancelled.
Fixes #13142
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
We only want one zlib dependency.
Zlib dependencies are reorganized so they use a hidden
`__vendored_zlib_ng` flag in cli that enables zlib-ng for both libz-sys
(used by ext/node) and flate2 (used by deno_web).
This also updates deno_graph, which has the JSR change to use "exports".
It's not yet useful atm, so I've made this PR a fix about the deno doc
--lint error message improvements. I'll do a follow-up PR that adds
exports to the deno.json
This is the release commit being forwarded back to main for 1.38.1
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
Co-authored-by: littledivy <littledivy@users.noreply.github.com>
This PR reduces the time to run `queue persistence with inflight
messages` test from 60 seconds down to about 6 seconds.
The test simulates a crash to ensure that inflight messages are cleaned
up and re-queued when the new process starts. Since messages are
considered dead after 5 seconds of being queued, reopening the db within
5 seconds does not re-queue the messages on startup (they do get
re-queued after 60 seconds, which is the cleanup frequency). By waiting
for 5 seconds before reopening the db, the test ensures that the cleanup
happens quickly when the db is opened.
We can move all promise ID knowledge to deno_core, allowing us to better
experiment with promise implementation in deno_core.
`{un,}refOpPromise(promise)` is equivalent to
`{un,}refOp(promise[promiseIdSymbol])`
Remove tokio-rustls as a direct dependency of Deno and refactor
test_server to reduce code duplication.
All tcp and tls listener paths go through the same streams now, with the
exception of the simpler Hyper http-only handlers (those can be done in
a later follow-up).
Minor bugs fixed:
- gRPC server should only serve h2
- WebSocket over http/2 had a port overlap
- Restored missing eye-catchers for some servers (still missing on Hyper
ones)
This commit moves all Chrome Devtools Protocol messages to `cli/cdp.rs`
and refactors all places using these types to pull them from a common
place.
No functional changes.
As pointed out in https://github.com/denoland/deno/issues/21067 , it's
confusing that `deno doc --lint mod.ts` outputs the documentation to
stdout on success. Instead, it would be better if it outputted how many
files were checked similar to what `deno lint` does on success. It still
outputs the documentation if `--lint` or `--html` are provided so this
is non-breaking.
This commit adds granular `--unstable-*` flags:
- "--unstable-broadcast-channel"
- "--unstable-ffi"
- "--unstable-fs"
- "--unstable-http"
- "--unstable-kv"
- "--unstable-net"
- "--unstable-worker-options"
- "--unstable-cron"
These flags are meant to replace a "catch-all" flag - "--unstable", that
gives a binary control whether unstable features are enabled or not. The
downside of this flag that allowing eg. Deno KV API also enables the FFI
API (though the latter is still gated with a permission).
These flags can also be specified in `deno.json` file under `unstable`
key.
Currently, "--unstable" flag works the same way - I will open a follow
up PR that will print a warning when using "--unstable" and suggest to use
concrete "--unstable-*" flag instead. We plan to phase out "--unstable"
completely in Deno 2.
Implements `WebSocket` over http/2. This requires a conformant http/2
server supporting the extended connect protocol.
Passes approximately 100 new WPT tests (mostly `?wpt_flags=h2` versions
of existing websockets APIs).
This is implemented as a fallback when http/1.1 fails, so a server that
supports both h1 and h2 WebSockets will still end up on the http/1.1
upgrade path.
The patch also cleas up the websockets handshake to split it up into
http, https+http1 and https+http2, making it a little less intertwined.
This uncovered a likely bug in the WPT test server:
https://github.com/web-platform-tests/wpt/issues/42896
This PR adds unstable `Deno.cron` API to trigger execution of cron jobs.
* State: All cron state is in memory. Cron jobs are scheduled according
to the cron schedule expression and the current time. No state is
persisted to disk.
* Time zone: Cron expressions specify time in UTC.
* Overlapping executions: not permitted. If the next scheduled execution
time occurs while the same cron job is still executing, the scheduled
execution is skipped.
* Retries: failed jobs are automatically retried until they succeed or
until retry threshold is reached. Retry policy can be optionally
specified using `options.backoffSchedule`.
This change adds the `--env=[FILE]` flag to the `run`, `compile`,
`eval`, `install` and `repl` subcommands. Environment variables set in
the CLI overwrite those defined in the `.env` file.
Adds a new `--lint` flag to `deno doc` that surfaces three kinds of
diagnostics:
1. Diagnostic for non-exported type referenced in an exported type.
* Why? People often forget to export types from a module in TypeScript.
To supress this diagnostic, add an `@internal` jsdoc tag to the internal
type.
1. Diagnostic for missing return type or missing property type on a
**public** type.
* Why? Otherwise `deno doc` will not display good documentation. Adding
explicit types also helps with type checking performance.
1. Diagnostic for missing jsdoc on a **public** type.
* Why? Everything should be documented. This diagnostic can be supressed
by adding a jsdoc comment description.
If the lint passes, `deno doc` generates documentation as usual.
For example, checking for deno doc diagnostics on the CI:
```shellsession
$ deno doc --lint mod.ts second_entrypoint.ts > /dev/null
```
This feature is incredibly useful for library authors.
## Why not include this in `deno lint`?
1. The command needs the documenation output in order to figure out the
diagnostics.
1. `deno lint` doesn't understand where the entrypoints are. That's
critical for the diagnostics to be useful.
1. It's much more performant to do this while generating documentation.
1. There is precedence in rustdoc (ex. `#![warn(missing_docs)]`).
## Why not `--check`?
It is confusing with `deno run --check`, since that means to run type
checking (and confusing with `deno check --docs`).
## Output Future Improvement
The output is not ideal atm, but it's fine for a first pass. We will
improve it in the future.
Closes https://github.com/denoland/deno_lint/pull/972
Closes https://github.com/denoland/deno_lint/issues/970
Closes https://github.com/denoland/deno/issues/19356
Use new https://github.com/denoland/rustls-tokio-stream project instead
of tokio-rustls for direct websocket connections. This library was
written from the ground up to be more reliable and should help with
various bugs that may occur due to underlying bugs in the old library.
Believed to fix #20355, #18977, #20948
This commit updates the ext/kv module to use the denokv_* crates for
the protocol and the sqlite backend. This also fixes a couple of bugs in
the sqlite backend, and updates versionstamps to be updated less
linearly.
This commit adds `--unstable-hmr` flag, that enabled Hot Module Replacement.
This flag works like `--watch` and accepts the same arguments. If
HMR is not possible the process will be restarted instead.
Currently HMR is only supported in `deno run` subcommand.
Upon HMR a `CustomEvent("hmr")` will be dispatched that contains
information which file was changed in its `details` property.
---------
Co-authored-by: Valentin Anger <syrupthinker@gryphno.de>
Co-authored-by: David Sherret <dsherret@gmail.com>
This commit adds support for multiple entry points to `deno doc`.
Unfortunately to achieve that, I had to change the semantics of the
command to explicitly require `--filter` parameter for filtering
symbols, instead of treating second free argument as the filter argument.
`deno doc --builtin` is still supported, but cannot be mixed with
actual entrypoints.
Upgrades to deno_doc 0.70 which includes the feature for showing
non-exported types referenced in exported types as well as a much more
advanced deno doc that uses a symbol graph.
As title. This will help use the two independently from the other, which
will help in an upcoming deno doc PR where I need to parse the source
files with scope analysis.
This PR adds a new unstable "bring your own node_modules" (BYONM)
functionality currently behind a `--unstable-byonm` flag (`"unstable":
["byonm"]` in a deno.json).
This enables users to run a separate install command (ex. `npm install`,
`pnpm install`) then run `deno run main.ts` and Deno will respect the
layout of the node_modules directory as setup by the separate install
command. It also works with npm/yarn/pnpm workspaces.
For this PR, the behaviour is opted into by specifying
`--unstable-byonm`/`"unstable": ["byonm"]`, but in the future we may
make this the default behaviour as outlined in
https://github.com/denoland/deno/issues/18967#issuecomment-1761248941
This is an extremely rough initial implementation. Errors are
terrible in this and the LSP requires frequent restarts. Improvements
will be done in follow up PRs.
This commit introduces "WatcherCommunicator" struct that
is used facilitate bi-directional communication between CLI
file watcher and the watched function.
Prerequisite for https://github.com/denoland/deno/pull/20876
This brings in [`display`](https://github.com/rgbkrk/display.js) as part
of the `Deno.jupyter` namespace.
Additionally these APIs were added:
- "Deno.jupyter.md"
- "Deno.jupyter.html"
- "Deno.jupyter.svg"
- "Deno.jupyter.format"
These APIs greatly extend capabilities of rendering output in Jupyter
notebooks.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This commit improves "node:http2" module implementation, by enabling
to use "options.createConnection" callback when starting an HTTP2
session.
This change enables to pass basic client-side test with "grpc-js/grpc"
package.
Smaller fixes like "Http2Session.unref()" and "Http2Session.setTimeout()"
were handled as well.
Fixes #16647
Otherwise you can not return `Deno.Server` from async functions.
Co-authored-by: Yoshiya Hinosawa <stibium121@gmail.com>
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This fixes #20767.
We were losing `this` and then when an exception was happening, it
didn't show up in the output because we weren't bubbling up exceptions
from within a user defined function for displaying. I thought about
doing a `.call(object)` but didn't want to get in the way of a bound
`this` that a user or library was already putting on the function.
Adds `buffers` to the `Deno.jupyter.broadcast` API to send binary data
via comms. This affords the ability to send binary data via websockets
to the jupyter widget frontend.
fixes #20454
Current KV queues implementation assumes that `enqueue` and
`listenQueue` are called on the same instance of `Deno.Kv`. It's
possible that the same Deno process opens multiple KV instances pointing
to the same fs path, and in that case `listenQueue` should still get
notified of messages enqueued through a different KV instance.
This makes `CliNpmResolver` a trait. The terminology used is:
- **managed** - Deno manages the node_modules folder and does an
auto-install (ex. `ManagedCliNpmResolver`)
- **byonm** - "Bring your own node_modules" (ex. `ByonmCliNpmResolver`,
which is in this PR, but unimplemented at the moment)
Part of #18967
This API is providing hoops to jump through with undergoing migration to
`#[op2]` macro.
The overhead of supporting this API is non-trivial and besides internal
use of it in test sanitizers is very rarely used in the wild.
This helps reduce flakes where a test starts an HTTP server and makes a
request using fetch, then shuts down the server, then starting a new
test with a new server, but the connection pool still has a "not quite
closed yet" connection to the old server, and a new request to the new
server gets sent on the closed connection, which obviously errors out.
Previously could flake on the op sanitizer because the
`await makeTempFile()` promise could leak out of the test. Now we ensure
the request is fully handled before returning.
We can go one level down in abstraction and avoid using the public
`ReadableStream` APIs.
This patch ~5% perf boost on small ReadableStream:
```
Running 10s test @ http://localhost:8080/
2 threads and 10 connections
Thread Stats Avg Stdev Max +/- Stdev
Latency 148.32us 108.95us 3.88ms 95.71%
Req/Sec 33.24k 2.68k 37.94k 73.76%
668188 requests in 10.10s, 77.74MB read
Requests/sec: 66162.91
Transfer/sec: 7.70MB
```
main:
```
Running 10s test @ http://localhost:8080/
2 threads and 10 connections
Thread Stats Avg Stdev Max +/- Stdev
Latency 150.23us 67.61us 4.39ms 94.80%
Req/Sec 31.81k 1.55k 35.56k 83.17%
639078 requests in 10.10s, 74.36MB read
Requests/sec: 63273.72
Transfer/sec: 7.36MB
```
When sending configuration requests to the client, reads `javascript`
and `typescript` sections in addition to `deno`.
The LSP's initialization options now accepts `javascript` and
`typescript` namespaces.
Give auto-import completion entries a sort-text suffix depending on if
the specifier parses as a URL. This will favour relative and bare
(likely import-mapped) specifiers.
Adds an experimental unstable built-in package manager to Deno, but it is
currently not usable because the registry infrastructure hasn't been
setup and it points to a non-existent url by default. The default
registry url can be configured via the `DENO_REGISTRY_URL` environment
variable.
This commit changes ordering of quickfix actions, by sorting them in
following order:
- TSC fixes
- Deno fixes
- deno_lint fixes
Co-authored-by: Nayeem Rahman <nayeemrmn99@gmail.com>
Closes #20535.
# Screenshots
## JSON
<img width="779" alt="image"
src="https://github.com/denoland/deno/assets/836375/668bb1a6-3f76-4b36-974e-cdc6c93f94c3">
## Vegalite
<img width="558" alt="image"
src="https://github.com/denoland/deno/assets/836375/a5e70908-6b87-42d8-85c3-1323ad52a00f">
# Implementation
Instead of going the route of recursively getting all the objects under
`application/.*json` keys, I went with `JSON.stringify`ing in denospace
then parsing it from rust. One of the key benefits of serializing and
deserializing is that non-JSON-able entries will get stripped
automatically. This also keeps the code pretty simple.
In the future we should _only_ do this for `application/.*json` keys.
cc @mmastrac
"Fixes" the exception display issue of #20524 on older versions of
Jupyter that required `evalue` to be truthy. For now, until we can do
proper processing of the `ExceptionDetails` this will make Jupyter
Notebook 6.5.1 and below happy.
This is the alternative "just work now" PR to #20530
This commit improves async op sanitizer speed by only delaying metrics
collection if there are pending ops. This
results in a speedup of around 30% for small CPU bound unit tests.
It performs this check and possible delay on every collection now,
fixing an issue with parent test leaks into steps.
This commit adds "deno jupyter" subcommand which
provides a Deno kernel for Jupyter notebooks.
The implementation is mostly based on Deno's REPL and
reuses large parts of it (though there's some clean up that
needs to happen in follow up PRs). Not all functionality of
Jupyter kernel is implemented and some message type
are still not implemented (eg. "inspect_request") but
the kernel is fully working and provides all the capatibilities
that the Deno REPL has; including TypeScript transpilation
and npm packages support.
Closes https://github.com/denoland/deno/issues/13016
---------
Co-authored-by: Adam Powers <apowers@ato.ms>
Co-authored-by: Kyle Kelley <rgbkrk@gmail.com>
This commit improves compatibility of "node:http2" module by polyfilling
"connect" method and "ClientHttp2Session" class. Basic operations like
streaming, header and trailer handling are working correctly.
Refing/unrefing is still a TODO and "npm:grpc-js/grpc" is not yet working
correctly.
---------
Co-authored-by: Matt Mastracci <matthew@mastracci.com>
This adds the ability to pattern match unordered lines. For example, the
downloading messages may appear in any order
```
[UNORDERED_START]
Download https://localhost:4546/a.ts
Download https://localhost:4546/b.ts
[UNORDERED_END]
Hello!
```
Additionally, I've made the pattern matching slightly more strict and the output better.
TaskQueue is being removed from `deno_core` and replaced with an unsync
version in deno_unsyc.
https://github.com/denoland/deno_core/pull/193
This is a change in preparation for that. The remaining
`deno_core::TaskQueue` usage in this repo should be replaced with
`deno_core::unsync::TaskQueue` once upgraded.
### What
Skip writing files from the template if the files already exist in the
project directory.
### Why
When I run deno init in a directory that already has a main.ts, or one
of the other template files, I usually want to initialize a workspace
around a file I've started working in. A hard error in this case seems
counter productive. An informational message about what's being skipped
seems sufficient.
Close #20433
Removes usage of `serde_json::Value` in several ops used in TSC, in
favor of using strongly typed structs. This will unblock more
changes in https://github.com/denoland/deno/pull/20462.
This PR implements a graceful shutdown API for Deno.serve, allowing all
current connections to drain from the server before shutting down, while
preventing new connections from being started or new transactions on
existing connections from being created.
We split the cancellation handle into two parts: a listener handle, and
a connection handle. A graceful shutdown cancels the listener only,
while allowing the connections to drain. The connection handle aborts
all futures. If the listener handle is cancelled, we put the connections
into graceful shutdown mode, which disables keep-alive on http/1.1 and
uses http/2 mechanisms for http/2 connections.
In addition, we now guarantee that all connections are complete or
cancelled, and all resources are cleaned up when the server `finished`
promise resolves -- we use a Rust-side server refcount for this.
Performance impact: does not appear to affect basic serving performance
by more than 1% (~126k -> ~125k)
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
LSP testing APIs now obey the various file inclusion settings:
- Modules shown in the text explorer now respect the `exclude`,
`test.exclude` and `test.include` fields in `deno.json`, as well as
`deno.enablePaths` in VSCode settings.
- Modules with testing code lens now respect the `"exclude"`,
`test.exclude` and `test.include` fields in `deno.json`. Code lens
already respects `deno.enablePaths`.
This allows us to opt in to extremely detailed tracing from dependency
libraries, like so:
```
cargo run --features tracing/log,tracing/max_level_trace -- test --log-level=trace -A --unstable ./cli/tests/unit/serve_test.ts
```
It will not impact normal operation as it requires the
`tracing/max_level_trace` and `tracing/log` to be active.
Note that tracing is already a dependency -- this just makes it a direct
dep of cli so we can access its features more easily.
Fixes https://github.com/denoland/deno/issues/19816
In that issue, I suggest switching over the other brotli functionality
to the Rust API provided by the `brotli` crate. Here, I only do that
with the `brotli_decompress` function to fix the bug with buffers longer
than 4096 bytes.
Previously we pre-computed enabled paths into `Config::enabled_paths`,
and had to keep updating it. Now we determine enabled paths directly
from `Config::settings` on demand as a single source of truth.
Removes `Config::root_uri`. If `InitializeParams::rootUri` is given, and
it doesn't correspond to a folder in
`InitializeParams::workspaceFolders`, prepend it to
`Config::workspace_folders` as a mocked folder.
Includes groundwork for
https://github.com/denoland/vscode_deno/issues/908. In a minor version
cycle or two we can fix that in vscode_deno, and it won't break for Deno
versions post this patch due to the corrected deserialization logic for
`enablePaths`.
Keys are expensive metadata. We track it for various purposes, e.g.
transaction conflict check, and key expiration.
This patch limits the total key size in an atomic operation to 80 KiB
(81920 bytes). This helps ensure efficiency in implementations.
Fixes #19802.
Properly respect when clients do not have the `workspace/configuration`
capability, a.k.a. when an editor cannot provide scoped settings on
request from the LSP.
- Fix one spot where we weren't checking for the capability before
sending this request.
- For `enablePaths`, fall back to the settings passed in the
initialization options in more cases.
- Respect the `workspace/configuration` capability in the test harness
client.
See:
https://microsoft.github.io/language-server-protocol/specifications/lsp/3.17/specification/#workspace_configuration.
Closes #14122.
Adds two extensions to `--allow-run` behaviour:
- When `--allow-run=foo` is specified and `foo` is found in the `PATH`
at startup, `RunDescriptor::Path(which("foo"))` is added to the
allowlist alongside `RunDescriptor::Name("foo")`. Currently only the
latter is.
- When run permission for `foo` is queried and `foo` is found in the
`PATH` at runtime, either `RunDescriptor::Path(which("foo"))` or
`RunDescriptor::Name("foo")` would qualify in the allowlist. Currently
only the latter does.
Previously:
```rust
pub struct TestDefinition {
pub id: String,
pub name: String,
pub range: SourceRange,
pub steps: Vec<TestDefinition>,
}
pub struct TestDefinitions {
pub discovered: Vec<TestDefinition>,
pub injected: Vec<lsp_custom::TestData>,
pub script_version: String,
}
```
Now:
```rust
pub struct TestDefinition {
pub id: String,
pub name: String,
pub range: Option<Range>,
pub is_dynamic: bool, // True for 'injected' module, not statically detected but added at runtime.
pub parent_id: Option<String>,
pub step_ids: HashSet<String>,
}
pub struct TestModule {
pub specifier: ModuleSpecifier,
pub script_version: String,
pub defs: HashMap<String, TestDefinition>,
}
```
Storing the test tree as a literal tree diminishes the value of IDs,
even though vscode stores them that way. This makes all data easily
accessible from `TestModule`. It unifies the interface between
'discovered' and 'injected' tests. This unblocks some enhancements wrt
syncing tests between the LSP and extension, such as this TODO:
61f08d5a71/client/src/testing.ts (L251-L259)
and https://github.com/denoland/vscode_deno/issues/900. We should also
get more flexibility overall.
`TestCollector` is cleaned up, now stores a `&mut TestModule` directly
and registers tests as it comes across them with
`TestModule::register()`. This method ensures sanity in the redundant
data from having both of `TestDefinition::{parent_id,step_ids}`.
All of the messy conversions between `TestDescription`,
`LspTestDescription`, `TestDefinition`, `TestData` and `TestIdentifier`
are cleaned up. They shouldn't have been using `impl From` and now the
full list of tests is available to their implementations.
We never want tests to hit the real npm registry because this causes
test flakes. In addition, we set a sentinal "unset" value for
`NPM_CONFIG_REGISTRY` to ensure that all tests requiring npm go through
the test server.
Adds `runtime/shared.rs` which is imported by both `build.rs` and the
rest of the crate, containing utilities used by both.
Renames the `snapshot_from_snapshot` feature to
`exclude_runtime_main_js` since that's what it does and it's relevant
outside of snapshotting when `__runtime_js_sources` is specified.
The fix for #20188 was not entirely correct -- we were unlocking the
global buffer incorrectly. This PR introduces a lock state that ensures
we only unlock a lock we have taken out.
When a TCP connection is force-closed (ie: browser refresh), the
underlying future we pass to Hyper is dropped which may cause us to try
to drop the body resource while the OpState lock is still held.
Preconditions for this bug to trigger:
- The body resource must have been taken
- The response must return a resource (which requires us to take the
OpState lock)
- The TCP connection must have been dropped before this
Fixes #20315 and #20298
The motivation is If I'm using deno lint --rules, I want to see all the
rules especially the one that have no tags, since the recommend ones are
already active
This change also prints the tags associated with the rule inline.
<!--
Before submitting a PR, please read https://deno.com/manual/contributing
1. Give the PR a descriptive title.
Examples of good title:
- fix(std/http): Fix race condition in server
- docs(console): Update docstrings
- feat(doc): Handle nested reexports
Examples of bad title:
- fix #7123
- update docs
- fix bugs
2. Ensure there is a related issue and it is referenced in the PR text.
3. Ensure there are tests that cover the changes.
4. Ensure `cargo test` passes.
5. Ensure `./tools/format.js` passes without changing files.
6. Ensure `./tools/lint.js` passes.
7. Open as a draft PR if your work is still in progress. The CI won't
run
all steps, but you can add '[ci]' to a commit message to force it to.
8. If you would like to run the benchmarks on the CI, add the 'ci-bench'
label.
-->
As the title.
---------
Co-authored-by: Matt Mastracci <matthew@mastracci.com>
Disables `BenchContext::start()` and `BenchContext::end()` for low
precision benchmarks (less than 0.01s per iteration). Prints a warning
when they are used in such benchmarks, suggesting to remove them.
```ts
Deno.bench("noop", { group: "noops" }, () => {});
Deno.bench("noop with start/end", { group: "noops" }, (b) => {
b.start();
b.end();
});
```
Before:
```
cpu: 12th Gen Intel(R) Core(TM) i9-12900K
runtime: deno 1.36.2 (x86_64-unknown-linux-gnu)
file:///home/nayeem/projects/deno/temp3.ts
benchmark time (avg) iter/s (min … max) p75 p99 p995
----------------------------------------------------------------------------- -----------------------------
noop 2.63 ns/iter 380,674,131.4 (2.45 ns … 27.78 ns) 2.55 ns 4.03 ns 5.33 ns
noop with start and end 302.47 ns/iter 3,306,146.0 (200 ns … 151.2 µs) 300 ns 400 ns 400 ns
summary
noop
115.14x faster than noop with start and end
```
After:
```
cpu: 12th Gen Intel(R) Core(TM) i9-12900K
runtime: deno 1.36.1 (x86_64-unknown-linux-gnu)
file:///home/nayeem/projects/deno/temp3.ts
benchmark time (avg) iter/s (min … max) p75 p99 p995
----------------------------------------------------------------------------- -----------------------------
noop 3.01 ns/iter 332,565,561.7 (2.73 ns … 29.54 ns) 2.93 ns 5.29 ns 7.45 ns
noop with start and end 7.73 ns/iter 129,291,091.5 (6.61 ns … 46.76 ns) 7.87 ns 13.12 ns 15.32 ns
Warning start() and end() calls in "noop with start and end" are ignored because it averages less than 0.01s per iteration. Remove them for better results.
summary
noop
2.57x faster than noop with start and end
```
Fixes https://github.com/denoland/vscode_deno/issues/743.
```ts
const items: string[] = ['foo', 'bar', 'baz'];
items.map
// ->
items.map(callbackfn) // auto-completes with argument placeholders.
```
---
We have our own setting for `suggest.completeFunctionCalls`, which must
be enabled:
```js
{
"deno.suggest.completeFunctionCalls": true,
// Re-implementation of:
// "javascript.suggest.completeFunctionCalls": true,
// "typescript.suggest.completeFunctionCalls": true,
}
```
But before this commit the actual implementation had been left as a TODO.
This PR adds a test reporter for the [Test Anything
Protocol](https://testanything.org).
It makes the following implementation decisions:
- No TODO pragma, as there is no such marker in `Deno.test`
- SKIP pragma for `ignore`d tests
- Test steps are treated as TAP14 subtests
- Support for this in consumers seems spotty
- Some consumers will incorrectly interpret these markers, resulting in
unexpected output
- Considering the lack of support, and to avoid implementation
complexity,
subtests are at most one level deep (all test steps are in the same
subtest)
- To accommodate consumers that use comments to indicate test-suites
(unspecced)
- The test module path is output as a comment
- This is disabled for `--parallel` testing
- Failure diagnostics are output as JSON, which is also valid YAML
- The structure is not specified, so the format roughly follows the spec
example:
```
---
message: "Failed with error 'hostname peebles.example.com not found'"
severity: fail
found:
hostname: 'peebles.example.com'
address: ~
wanted:
hostname: 'peebles.example.com'
address: '85.193.201.85'
at:
file: test/dns-resolve.c
line: 142
...
```
Fixes https://github.com/denoland/vscode_deno/issues/843.
Prevents step results from being reported twice. Refactors
`LspTestReporter` to use a complete `(test_id, descriptor)` map instead
of a brittle `LspTestReporter::stack`.
Bumps [trust-dns-server](https://github.com/bluejekyll/trust-dns) from
0.22.0 to 0.22.1.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/bluejekyll/trust-dns/releases">trust-dns-server's
releases</a>.</em></p>
<blockquote>
<h2>v0.22.1 - Deny response requests on the server</h2>
<h2>0.22.1</h2>
<h3>Fixed</h3>
<ul>
<li>(server) drop response messages <a
href="https://redirect.github.com/bluejekyll/trust-dns/issues/1952">#1952</a>
by <a href="https://github.com/djc"><code>@djc</code></a></li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/bluejekyll/trust-dns/blob/main/CHANGELOG.md">trust-dns-server's
changelog</a>.</em></p>
<blockquote>
<h2>0.22.1</h2>
<h3>Fixed</h3>
<ul>
<li>(server) drop response messages <a
href="https://redirect.github.com/bluejekyll/trust-dns/issues/1952">#1952</a>
by <a href="https://github.com/djc"><code>@djc</code></a></li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="9f344b54cd"><code>9f344b5</code></a>
bump server and bin crates to 0.22.1</li>
<li><a
href="9e6e77293b"><code>9e6e772</code></a>
update CHANGELOG for 0.22.1</li>
<li><a
href="5f6278154d"><code>5f62781</code></a>
Regenerate the test SSL certificates</li>
<li><a
href="2fd2603171"><code>2fd2603</code></a>
server: drop response messages</li>
<li>See full diff in <a
href="https://github.com/bluejekyll/trust-dns/compare/v0.22.0...v0.22.1">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
You can disable automated security fix PRs for this repo from the
[Security Alerts page](https://github.com/denoland/deno/network/alerts).
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
This patch adds a `remote` backend for `ext/kv`. This supports
connection to Deno Deploy and potentially other services compatible with
the KV Connect protocol.
Few improvements to FFI types:
1. Export `PointerObject` for convenience. It's fairly commonly used in
library code and thus should be exported.
2. Fix various comments around `PointerValue` and `UnsafePointer` and
expand upon them to better reflect reality.
3. Instead of using a `Record<"value", type>[T]` for determining the
type of an FFI symbol parameter use direct `T extends "value" ? type :
never` comparison.
The last part enables smuggling extra information into the parameter and
return value string declarations at the type level. eg. Instead of just
`"u8"` the parameter can be `"u8" & { [brand]: T }` for some `T extends
number`. That `T` can then be extracted from the parameter to form the
TypeScript function's parameter or return value type. Essentially, this
enables type-safe FFI!
The foremost use-cases for this are enums and pointer safety. These are
implemented in the second commit which should enable, in a backwards
compatible way, for pointer parameters to declare what sort of pointer
they mean, functions to declare what the API definition of the native
function is, and for numbers to declare what Enum they stand for (if
any).
Deno.serve's fast streaming implementation was not keeping the request
body resource ID alive. We were taking the `Rc<Resource>` from the
resource table during the response, so a hairpin duplex response that
fed back the request body would work.
However, if any JS code attempted to read from the request body (which
requires the resource ID to be valid), the response would fail with a
difficult-to-diagnose "EOF" error.
This was affecting more complex duplex uses of `Deno.fetch` (though as
far as I can tell was unreported).
Simple test:
```ts
const reader = request.body.getReader();
return new Response(
new ReadableStream({
async pull(controller) {
const { done, value } = await reader.read();
if (done) {
controller.close();
} else {
controller.enqueue(value);
}
},
}),
```
And then attempt to use the stream in duplex mode:
```ts
async function testDuplex(
reader: ReadableStreamDefaultReader<Uint8Array>,
writable: WritableStreamDefaultWriter<Uint8Array>,
) {
await writable.write(new Uint8Array([1]));
const chunk1 = await reader.read();
assert(!chunk1.done);
assertEquals(chunk1.value, new Uint8Array([1]));
await writable.write(new Uint8Array([2]));
const chunk2 = await reader.read();
assert(!chunk2.done);
assertEquals(chunk2.value, new Uint8Array([2]));
await writable.close();
const chunk3 = await reader.read();
assert(chunk3.done);
}
```
In older versions of Deno, this would just lock up. I believe after
23ff0e722e, it started throwing a more
explicit error:
```
httpServerStreamDuplexJavascript => ./cli/tests/unit/serve_test.ts:1339:6
error: TypeError: request or response body error: error reading a body from connection: Connection reset by peer (os error 54)
at async Object.pull (ext:deno_web/06_streams.js:810:27)
```
Some people might get think they need to import from this directory,
which could cause confusion and duplicate dependencies. Additionally,
the `vendor` directory has special behaviour in the language server, so
importing from the folder will definitely cause confusion and issues
there.
Fixes this error message:
```
error: missing field `now` at line 32 column 1
```
This would occur if someone used an old version of the deno_cache
library to cache information in the cache then tried to load it with the
latest CLI. Regression in the last patch when migrating to the
deno_cache_dir crate.
Properly handle the `SQLITE_BUSY` error code by retrying the
transaction.
Also wraps database initialization logic in a transaction to protect
against incomplete/concurrent initializations.
Fixes https://github.com/denoland/deno/issues/20116.
The goal of this PR is to address issue #20106 where a `TypeError`
occurs when the variables `uid` and `gid` from `userInfo()` in `node:os`
are reassigned if the user is on Windows. Both `uid` and `gid` are
marked as `const` therefore producing a `TypeError` when the two are
reassigned.
This PR achieves that goal by marking `uid` and `gid` as `let`
To fix bugs around detection of when node emulation is required, we will
just eagerly initialize it. The improvements we make to reduce the
impact of the startup time:
- [x] Process stdin/stdout/stderr are lazily created
- [x] node.js global proxy no longer allocates on each access check
- [x] Process checks for `beforeExit` listeners before doing expensive
shutdown work
- [x] Process should avoid adding global event handlers until listeners
are added
Benchmarking this PR (`89de7e1ff`) vs main (`41cad2179`)
```
12:36 $ third_party/prebuilt/mac/hyperfine --warmup 100 -S none './deno-41cad2179 run ./empty.js' './deno-89de7e1ff run ./empty.js'
Benchmark 1: ./deno-41cad2179 run ./empty.js
Time (mean ± σ): 24.3 ms ± 1.6 ms [User: 16.2 ms, System: 6.0 ms]
Range (min … max): 21.1 ms … 29.1 ms 115 runs
Benchmark 2: ./deno-89de7e1ff run ./empty.js
Time (mean ± σ): 24.0 ms ± 1.4 ms [User: 16.3 ms, System: 5.6 ms]
Range (min … max): 21.3 ms … 28.6 ms 126 runs
```
Fixes https://github.com/denoland/deno/issues/20142
Fixes https://github.com/denoland/deno/issues/15826
Fixes https://github.com/denoland/deno/issues/20028
The goal of this PR is to address issue #19520 where Deno panics when
encountering an invalid SSL certificate.
This PR achieves that goal by removing an `.expect()` statement and
implementing a match statement on `tsl_config` (found in
[/ext/net/ops_tsl.rs](e071382768/ext/net/ops_tls.rs (L1058)))
to check whether the desired configuration is valid
---------
Co-authored-by: Matt Mastracci <matthew@mastracci.com>
Fix #20022, fix #19627 (duplicate)
#17333 upgraded clap from version 3.1 to version 4. clap version 3.2.0
(intentionally) broke a behavior that deno was relying on to make `deno
run --v8-flags=--help` work without specifying a file, see
clap-rs/clap#3793. The workaround was to make the script argument
required _unless_ `--v8-flags` is present. This broke the expectation
that all successfully parsed `run` commands have the script argument
set, leading to the panic on
`matches.remove_many::<String>("script_arg").unwrap()`.
Clap, as far as I was able to find out, does not currently offer a neat
solution to this problem. This PR adds logic to create and return a
custom clap error when a parsed run command does not have the script
argument.
I added an appropriate test.
Handles ASCCI espace chars in test and bench name making
test and bench reporting more reliable. This one is also tested
in the fixture of "node:test" module.
Rename some of the helper methods on the Fs trait to be suffixed with
`_sync` / `_async`, in preparation of the introduction of more async
methods for some helpers.
Also adds a `read_text_file_async` helper to complement the renamed
`read_text_file_sync` helper.
This commit moves `snapshot_from_lockfile` function to [deno_npm
crate](https://github.com/denoland/deno_npm). This allows this function
to be called outside Deno CLI (in particular, Deno Deploy).
Not sure why `40_testing.js` is there. The other two `00_typescript.js`
and `99_main_compiler.js` should be covered by
`files_loaded_during_snapshot` at the end.
This helps with `__runtime_js_sources` wrt changing `40_testing.js`.
Renames the unstable `deno_modules` directory and corresponding settings
to `vendor` after feedback. Also causes the vendoring of the
`node_modules` directory which can be disabled via
`--node-modules-dir=false` or `"nodeModulesDir": false`.
This changes the design of the manifest.json file to have a separate
"folders" map for mapping hashed directories. This allows, for example,
to add files in a folder like `http_localhost_8000/#testing_5de71/` and
have them be resolved automatically as long as their remaining
components are identity-mappable to the file system (not hashed). It
also saves space in the manifest.json file by only including the hashed
directory instead of each descendant file.
```
// manifest.json
{
"folders": {
"https://localhost/NOT_MAPPABLE/": "localhost/#not_mappable_5cefgh"
},
"modules": {
"https://localhost/folder/file": {
"headers": {
"content-type": "application/javascript"
}
},
}
}
// folder structure
localhost
- folder
- #file_2defn (note: I've made up the hashes in these examples)
- #not_mappable_5cefgh
- mod.ts
- etc.ts
- more_files.ts
```
Closes #19399 (running without snapshots at all was suggested as an
alternative solution).
Adds a `__runtime_js_sources` pseudo-private feature to load extension
JS sources at runtime for faster development, instead of building and
loading snapshots or embedding sources in the binary. Will only work in
a development environment obviously.
Try running `cargo test --features __runtime_js_sources
integration::node_unit_tests::os_test`. Then break some behaviour in
`ext/node/polyfills/os.ts` e.g. make `function cpus() {}` return an
empty array, and run it again. Fix and then run again. No more build
time in between.
Chipping away at making tests faster. Appears we don't need double
timeout before sanitizing ops. This should cut baseline cost of running a test
by half.
This commit adds new "--deny-*" permission flags. These are complimentary to
"--allow-*" flags.
These flags can be used to restrict access to certain resources, even if they
were granted using "--allow-*" flags or the "--allow-all" ("-A") flag.
Eg. specifying "--allow-read --deny-read" will result in a permission error,
while "--allow-read --deny-read=/etc" will allow read access to all FS but the
"/etc" directory.
Runtime permissions APIs ("Deno.permissions") were adjusted as well, mainly
by adding, a new "PermissionStatus.partial" field. This field denotes that
while permission might be granted to requested resource, it's only partial (ie.
a "--deny-*" flag was specified that excludes some of the requested resources).
Eg. specifying "--allow-read=foo/ --deny-read=foo/bar" and then querying for
permissions like "Deno.permissions.query({ name: "read", path: "foo/" })"
will return "PermissionStatus { state: "granted", onchange: null, partial: true }",
denoting that some of the subpaths don't have read access.
Closes #18804.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Co-authored-by: Nayeem Rahman <nayeemrmn99@gmail.com>
This commit adds a "dot" reporter to "deno test" subcommand,
that can be activated using "--dot" flag.
It provides a concise output using:
- "." for passing test
- "," for ignored test
- "!" for failing test
User output is silenced and not printed to the console.
In non-TTY environments each result is printed on a separate line.
This commit provides basic polyfill for "node:test" module. Currently
only top-level "test" function is polyfilled, all remaining functions from
that module throw not implemented errors.
Closes https://github.com/denoland/deno/issues/17251
Closes #19970
This commits adds logic to retry failed module downloads once.
Both request and server errors are handled and the retry is done after
50 ms wait time.
I'm not sure why, but sending SIGABRT to Deno on my machine as part of
this test causes it to lock up very badly, leaving it in an unkillable
`UE+` state.
This showed up after #19333, but was not caused by it.
Closes #17589.
```ts
Deno.bench("foo", async (t) => {
const resource = setup(); // not included in measurement
t.start();
measuredOperation(resource);
t.end();
resource.close(); // not included in measurement
});
```
This PR fixes #19818. The problem was that the new InnerRequest class does not initialize the fields urlList and urlListProcessed that are used during a request clone. The solution aims to be straightforward by simply initializing the missing properties during the clone process. I also implemented a "cache" to the url getter of the new InnerRequest, avoiding the cost of calling op_http_get_request_method_and_url.
Source code is now not cloned anymore between eszip and deno_core, as
eszip now
returns `Arc<[u8]>`, that can be trivially casted into `Arc<str>`, which
`deno_core` can consume without copying.
This commit makes the following changes
- Created a `CompoundTestReporter` to allow us to use multiple reporters
- Implements `JUnitTestReporter` which writes JUnit XML to a path
- Added a CLI flag/option `--junit` that enables JUnit reporting. By
default this writes the report to `stdout` (and disables pretty
reporting). If a path is provided, it will write the JUnit report to
that file while the pretty reporter writes to stdout like normal
Output of `deno -- test --allow-all --unstable
--location=http://js-unit-tests/foo/bar --junit
cli/tests/unit/testing_test.ts `
```xml
<?xml version="1.0" encoding="UTF-8"?>
<testsuites name="deno test" tests="7" failures="0" errors="0" time="0.176">
<testsuite name="file:///Users/cooper/deno/deno/cli/tests/unit/testing_test.ts" tests="7" disabled="0" errors="0" failures="0">
<testcase name="testWrongOverloads" time="0.012">
</testcase>
<testcase name="nameOfTestCaseCantBeEmpty" time="0.009">
</testcase>
<testcase name="invalidStepArguments" time="0.008">
</testcase>
<testcase name="nameOnTextContext" time="0.029">
<properties>
<property name="step[passed]" value="step ... nested step"/>
<property name="step[passed]" value="step"/>
</properties>
</testcase>
<testcase name="originOnTextContext" time="0.030">
<properties>
<property name="step[passed]" value="step ... nested step"/>
<property name="step[passed]" value="step"/>
</properties>
</testcase>
<testcase name="parentOnTextContext" time="0.030">
<properties>
<property name="step[passed]" value="step ... nested step"/>
<property name="step[passed]" value="step"/>
</properties>
</testcase>
<testcase name="explicit undefined for boolean options" time="0.009">
</testcase>
</testsuite>
</testsuites>
```
We weren't auto-discovering the deno.json in two cases:
1. A project that didn't have a deno.json and just added one.
2. After a syntax error in the deno.json.
This now rediscovers it in both these cases.
Closes https://github.com/denoland/vscode_deno/issues/867
Code run within Deno-mode and Node-mode should have access to a
slightly different set of globals. Previously this was done through a
compile time code-transform for Node-mode, but this is not ideal and has
many edge cases, for example Node's globalThis having a different
identity than Deno's globalThis.
This commit makes the `globalThis` of the entire runtime a semi-proxy.
This proxy returns a different set of globals depending on the caller's
mode. This is not a full proxy, because it is shadowed by "real"
properties on globalThis. This is done to avoid the overhead of a full
proxy for all globalThis operations.
The globals between Deno-mode and Node-mode are now properly segregated.
This means that code running in Deno-mode will not have access to Node's
globals, and vice versa. Deleting a managed global in Deno-mode will
NOT delete the corresponding global in Node-mode, and vice versa.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Co-authored-by: Aapo Alasuutari <aapo.alasuutari@gmail.com>
Closes https://github.com/denoland/deno/issues/15277
This commit adds a single "warmup" run of empty function when running
`deno bench`.
This change will break so-called "JIT bias" which makes V8 optimize the
first function
and then bail out of optimization on second function. In essence the
"warmup" function
is getting optimized and then all user benches are bailed out of
optimization.
This PR breaks the addition of the `TestReporter` trait and refactoring
of `PrettyTestReporter` out of #19747. The goal is to enable the
addition of test reporters, including machine readable output.
Part of #19774. This makes it twice as fast on my machine.
Stores a file at `node_modules/.deno/setup-cache.bin`, which contains
information about how the node_modules folder is currently setup.
Obviously there is a risk that this information will get out of date
with the current folder structure.
This commit adds some regression tests for using `jsxImportSource` in
the config file in combination with an import map.
These underlying issues were fixed by #15561.
Closes #13389
Closes #14723
---------
Co-authored-by: Aapo Alasuutari <aapo.alasuutari@gmail.com>
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This commit stabilizes "Deno.serve()", which becomes the
preferred way to create HTTP servers in Deno.
Documentation was adjusted for each overload of "Deno.serve()"
API and the API always binds to "127.0.0.1:8000" by default.
This PR changes Web IDL interfaces to be declared with `var` instead of
`class`, so that accessing them via `globalThis` does not raise type
errors.
Closes #13390.
This is a fix for issue #19644, concerning the `parseCssColor` function
in the file `ext/console/01_console.js`. Changes made on lines
2756-2758. To sum it up:
> The internal `parseCssColor` function currently parses 3/4-digit hex
colors incorrectly. For example, it parses the string `#FFFFFF` as
`[255, 255, 255]` (as expected), but returns `[240, 240, 240]` for
`#FFF`, when it should return the same triplet as the former.
While it's not going to cause a fatal runtime error, it did bug me
enough to fix it real quick.
…nclusion" (#19519)"
This reverts commit 28a4f3d0f5.
This change causes failures when used outside Deno repo:
```
============================================================
Deno has panicked. This is a bug in Deno. Please report this
at https://github.com/denoland/deno/issues/new.
If you can reliably reproduce this panic, include the
reproduction steps and re-run with the RUST_BACKTRACE=1 env
var set and include the backtrace in your report.
Platform: linux x86_64
Version: 1.34.3+b37b286
Args: ["/opt/hostedtoolcache/deno/0.0.0-b37b286f7fa68d5656f7c180f6127bdc38cf2cf5/x64/deno", "test", "--doc", "--unstable", "--allow-all", "--coverage=./cov"]
thread 'main' panicked at 'called `Result::unwrap()` on an `Err` value: Failed to read "/home/runner/work/deno/deno/core/00_primordials.js"
Caused by:
No such file or directory (os error 2)', core/runtime/jsruntime.rs:699:8
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
```
Relands #19463. This time the `ExtensionFileSourceCode` enum is
preserved, so this effectively just splits feature
`include_js_for_snapshotting` into `exclude_js_sources` and
`runtime_js_sources`, adds a `force_include_js_sources` option on
`extension!()`, and unifies `ext::Init_ops_and_esm()` and
`ext::init_ops()` into `ext::init()`.
Fixes #19568
Values are not coerced to the desired type during deserialisation. This
makes serde_v8 stricter.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
… (#19463)"
This reverts commit ceb03cfb03.
This is being reverted because it causes 3.5Mb increase in the binary
size,
due to runtime JS code being included in the binary, even though it's
already snapshotted.
CC @nayeemrmn
This prevents documents specified in a deno.json's "exclude" from being
pre-loaded by the lsp.
For example, someone may have something like:
```jsonc
// deno.json
{
"exclude": [
"dist" // build directory
]
}
```
Remove `ExtensionFileSourceCode::LoadedFromFsDuringSnapshot` and feature
`include_js_for_snapshotting` since they leak paths that are only
applicable in this repo to embedders. Replace with feature
`exclude_js_sources`. Additionally the feature
`force_include_js_sources` allows negating it, if both features are set.
We need both of these because features are additive and there must be a
way of force including sources for snapshot creation while still having
the `exclude_js_sources` feature. `force_include_js_sources` is only set
for build deps, so sources are still excluded from the final binary.
You can also specify `force_include_js_sources` on any extension to
override the above features for that extension. Towards #19398.
But there was still the snapshot-from-snapshot situation where code
could be executed twice, I addressed that by making `mod_evaluate()` and
scripts like `core/01_core.js` behave idempotently. This allowed
unifying `ext::init_ops()` and `ext::init_ops_and_esm()` into
`ext::init()`.
I'm unsure why we canonicalize the config file path when loading and the
canonicalization is causing issues in #19431 because everything in the
lsp is not canonicalized except the config file (actually, the config
file is only canonicalized when auto-discovered and not whens pecified).
We also don't canonicalize module paths when loading them.
Canonicalization was added in https://github.com/denoland/deno/pull/7621
This commit adds ability to print metrics of the Tokio
runtime to the console by passing "DENO_TOKIO_METRICS=1"
env var.
Metrics will be printed every second, but this can be changed
by "DENO_TOKIO_METRICS_INTERVAL=500" env var.
Reduce the GC pressure from the websocket event method by splitting it
into an event getter and a buffer getter.
Before:
165.9k msg/sec
After:
169.9k msg/sec
This commit migrates "deno_core" from using "FuturesUnordered" to
"tokio::task::JoinSet". This makes every op to be a separate Tokio task
and should unlock better utilization of kqueue/epoll.
There were two quirks added to this PR:
- because of the fact that "JoinSet" immediately polls spawn tasks,
op sanitizers can give false positives in some cases, this was
alleviated by polling event loop once before running a test with
"deno test", which gives canceled ops an opportunity to settle
- "JsRuntimeState::waker" was moved to "OpState::waker" so that FFI
API can still use threadsafe functions - without this change the
registered wakers were wrong as they would not wake up the
whole "JsRuntime" but the task associated with an op
---------
Co-authored-by: Matt Mastracci <matthew@mastracci.com>
This commit adds basic support for "node:http2" module. Not
all APIs have been yet implemented, but this change already
allows to use this module for some basic functions.
The "grpc" package is still not working, but it's a good stepping
stone.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
## WHY
ref: https://github.com/denoland/deno/issues/19165
The FileHandle class has many missing methods compared to node.
Add these.
## WHAT
- Add close method
---------
Co-authored-by: Matt Mastracci <matthew@mastracci.com>
Related issue: https://github.com/denoland/deno/issues/19358.
This is a regression that seems to have been introduced in
https://github.com/denoland/deno/pull/18905. It looks to have been a
performance optimization.
The issue is probably easiest described with some code:
```ts
const target = new EventTarget();
const event = new Event("foo");
target.addEventListener("foo", () => {
console.log('base');
target.addEventListener("foo", () => {
console.log('nested');
});
});
target.dispatchEvent(event);
```
Essentially, the second event listener is being attached while the `foo`
event is still being dispatched. It should then not fire that second
event listener, but Deno currently does.
<!--
Before submitting a PR, please read https://deno.com/manual/contributing
1. Give the PR a descriptive title.
Examples of good title:
- fix(std/http): Fix race condition in server
- docs(console): Update docstrings
- feat(doc): Handle nested reexports
Examples of bad title:
- fix #7123
- update docs
- fix bugs
2. Ensure there is a related issue and it is referenced in the PR text.
3. Ensure there are tests that cover the changes.
4. Ensure `cargo test` passes.
5. Ensure `./tools/format.js` passes without changing files.
6. Ensure `./tools/lint.js` passes.
7. Open as a draft PR if your work is still in progress. The CI won't
run
all steps, but you can add '[ci]' to a commit message to force it to.
8. If you would like to run the benchmarks on the CI, add the 'ci-bench'
label.
-->
Internally, `node-tap` spawns a child process with `stdio: [0, 1, 2]`.
Whilst we don't support passing fd numbers as an argument so far, it
turns out that `[0, 1, 2]` is equivalent to `"inherit"` which we already
support. See: https://nodejs.org/api/child_process.html#optionsstdio
Mapping it to `"inherit"` is fine for us and gets us one step closer in
getting `node-tap` working. I'm now at the stage where already the
coverage table is shown 🎉
<!--
Before submitting a PR, please read https://deno.com/manual/contributing
1. Give the PR a descriptive title.
Examples of good title:
- fix(std/http): Fix race condition in server
- docs(console): Update docstrings
- feat(doc): Handle nested reexports
Examples of bad title:
- fix #7123
- update docs
- fix bugs
2. Ensure there is a related issue and it is referenced in the PR text.
3. Ensure there are tests that cover the changes.
4. Ensure `cargo test` passes.
5. Ensure `./tools/format.js` passes without changing files.
6. Ensure `./tools/lint.js` passes.
7. Open as a draft PR if your work is still in progress. The CI won't
run
all steps, but you can add '[ci]' to a commit message to force it to.
8. If you would like to run the benchmarks on the CI, add the 'ci-bench'
label.
-->
## WHY
ref: https://github.com/denoland/deno/issues/19165
Node's fs/promises includes a FileHandle class, but deno does not. The
open function in Node's fs/promises returns a FileHandle, which provides
an IO interface to the file. However, deno's open function returns a
resource id.
### deno
```js
> const fs = await import("node:fs/promises");
undefined
> const file3 = await fs.open("./README.md");
undefined
> file3
3
> file3.read
undefined
Node:
```
### Node
```js
> const fs = await import("fs/promises");
undefined
> const file3 = await fs.open("./tests/e2e_unit/testdata/file.txt");
undefined
> file3
FileHandle {
_events: [Object: null prototype] {},
_eventsCount: 0,
_maxListeners: undefined,
close: [Function: close],
[Symbol(kCapture)]: false,
[Symbol(kHandle)]: FileHandle {},
[Symbol(kFd)]: 24,
[Symbol(kRefs)]: 1,
[Symbol(kClosePromise)]: null
}
> file3.read
[Function: read]
```
To be compatible with Node, deno's open function should also return a
FileHandle.
## WHAT
I have implemented the first step in adding a FileHandle.
- Changed the return value of the open function to a FileHandle object
- Implemented the readFile method in FileHandle
- Add test code
## What to do next
This PR is the first step in adding a FileHandle, and there are things
that should be done next.
- Add functionality equivalent to Node's FileHandle to FileHandle
(currently there is only readFile)
---------
Co-authored-by: Matt Mastracci <matthew@mastracci.com>
It's not used anymore. Subsequently allows removing
`ModuleMap::op_state`, allowing `ModuleMap` to have a sane default so
`JsRuntime::module_map` no longer needs to be optional.
For the first implementation of node:http2, we'll use the internal
version of `Deno.serve` which allows us to listen on a raw TCP
connection rather than a listener.
This is mostly a refactoring, and hooking up of `op_http_serve_on` that
was never previously exposed (but designed for this purpose).
This cleans up `JsRuntime` a bit more:
* We no longer print cargo's rerun-if-changed messages in `JsRuntime` --
those are printed elsewhere
* We no longer special case the OwnedIsolate for snapshots. Instead we
make use of an inner object that has the `Drop` impl and allows us to
`std::mem::forget` it if we need to extract the isolate for a snapshot
* The `snapshot` method is only available on `JsRuntimeForSnapshot`, not
`JsRuntime`.
* `OpState` construction is slightly cleaner, though I'd still like to
extract more
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This PR adds the missing `process.reallyExit()` method to node's
`process` object.
Was [pinged on
twitter](https://twitter.com/biwanczuk/status/1663326659787862017)
regarding running the `fastify` test suite in node. They use `node-tap`
which has been around arguably the longest of the test frameworks and
relies on a couple of old APIs. They have `signal-exit` as a dependency
which in turn [makes use of
`process.reallyExit()`](8fa7fc9a9c/src/index.ts (L19)).
That function cannot be found anywhere in their documentation, but
exists at runtime. See
6a6b3c5402/lib/internal/bootstrap/node.js (L172)
This doesn't yet make `node-tap` work, but gets us one step closer.
Part of #17840
I haven't made any changes or additions to the tests themselves, just
moved the tests over and updated to match.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Rather than disallowing `ext:` resolution, clear the module map after
initializing extensions so extension modules are anonymized. This
operation is explicitly called in `deno_runtime`. Re-inject `node:`
specifiers into the module map after doing this.
Fixes #17717.
If a symlink within the `node_modules` directory lies outside that
directory, it will now warn and inline the file. For directories, it
will just warn for now.
Probably fixes #19251 (I'm still unable to reproduce).
